Thread Tools
Dec 12, 2009, 02:57 PM
200 mph club
r/cmark's Avatar
Quote:
Originally Posted by Dbox
I would install tail servo in the tail.Will clear more space in the fuse,no mess with cables/linkages.
With all these goodies in the nose ,You will have to counter weight her anyhow to achieve right CG.
You still will need a balsa spacer to widen the tail a little for servo to fit.
Yuri,who hates tail servos in the fuse.
The tail at its widest point is 3mm.
Sign up now
to remove ads between posts
Dec 12, 2009, 08:06 PM
One Idiot is plenty...
Dbox's Avatar
Quote:
Originally Posted by r/cmark
The tail at its widest point is 3mm.
I am washing my hands then
Yuri.
Dec 13, 2009, 12:00 PM
Bro
Bro
Registered User
Bro's Avatar

Viper


Quote:
Originally Posted by FASTBEN
did i miss this plane,,,is sousa out?
ben
Ben,
one left, it could be for you!
send me email if you are serious..

B
Latest blog entry: 2015
Dec 13, 2009, 05:24 PM
Cumulus Altimus
FASTBEN's Avatar
Quote:
Originally Posted by Bro
Ben,
one left, it could be for you!
send me email if you are serious..

B
i'll take it do not sell it...sent pm
ben
Dec 13, 2009, 05:38 PM
Registered User
sbritton's Avatar

Viper Aileron


Okay, making more progress on the build:
https://www.rcgroups.com/forums/member.php?u=206818

Took about two hours to get one aileron perfect. The next one should go faster now that I have a good approach.

I also have the power system in. Initially I will be going with the NEU1110-1Y, CC125 and 4S-2600-35C. With the firewall set back (into) the fuse a bit more than normal, I'm hoping my spinner has enough bite on the prop shaft.
Last edited by sbritton; Dec 13, 2009 at 06:04 PM.
Dec 14, 2009, 09:12 AM
Cumulus Altimus
FASTBEN's Avatar
will a 4s 4200 hyperion fit this baby?also can i go with Arc 28-47-1 kv-4250 and 110g it is similar than mega 16-25-1.with 5.2.1 neu on 4s.?
ben
Last edited by FASTBEN; Dec 14, 2009 at 09:37 AM.
Dec 14, 2009, 09:40 AM
Speed King
MarkChinery's Avatar
sbritton,
you should of not cut so much of the servo recess away & left an edge round it. you then cut down the cover so it fits in the recess not just stick the uncut cover over the outer skin.



Dec 14, 2009, 10:01 AM
Registered User
sbritton's Avatar
Mark: Thanks for the pics...I can't believe I didn't think about that. Well, it's not too late, I can build up the lip a little on each edge to get it to fit better later.

I like how you did the aileron linkage on yours better that what Stratair suggested...seems like a cleaner install with less cutting involved. In fact I was considering doing the same with an adjustable clevis. Given that I'm not doing competition flying, what I ended up with should be sufficient.
Dec 14, 2009, 10:54 AM
200 mph club
r/cmark's Avatar
I am going to have to mount the servo covers 'backwords' so the arms won't hit the cover.
Dec 14, 2009, 03:26 PM
Caution:Makes sharp left turns
Troy's Avatar
Quote:
Originally Posted by miche
For hor. stab at the center is 59mm
Not quite. How about this:
Dec 14, 2009, 04:28 PM
Registered User
miche's Avatar
All right, that is like 470mm

Quote:
Originally Posted by Troy
Not quite. How about this:
Dec 14, 2009, 04:40 PM
Cumulus Altimus
FASTBEN's Avatar
well talked to bob,,mine is green with black tips,still dangeling over the motor....
ben
Dec 14, 2009, 06:13 PM
Caution:Makes sharp left turns
Troy's Avatar
Thanks Miche, perfect.
Dec 14, 2009, 07:15 PM
Registered User
sbritton's Avatar

Viper Elevator


Well, made some good progress and have the elevator done. Took a bit trial and error, but have a nice solid slop-free elevator.
Dec 14, 2009, 07:33 PM
Cumulus Altimus
FASTBEN's Avatar
looking at GB in 5.2.1 but all i see is 6.7.1 or 5.3.1

http://www.neumotors.com/Site/Gear_Drives.html


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product New Build thread for Viper F5D Model Rob AR High Performance 20 Sep 08, 2009 03:06 AM
Discussion new pylon model - Viper F5D 2009 MarkChinery High Performance 2 Mar 11, 2009 01:46 PM