im gonna try ask the edf guys - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 06, 2009, 10:12 PM
guitarflyer
Discussion

im gonna try ask the edf guys


is 4.8v enought to run my rx and servos.i want to run a batt instead of bec.
or should i go 6v.im run typical 64 to 70 mm edfs.
thanx anthony
Sign up now
to remove ads between posts
Oct 06, 2009, 10:36 PM
Team EJF >>>WHOOSH>>>
AceMigKiller's Avatar
6v is almost always better, but I do run some 4.8v packs on low-draw setups (6 servos or less).
You'll be A-Okay with 4.8v, gas guys running higher servo loads did it for years! lol

Vic
Oct 06, 2009, 10:41 PM
Xpress..'s Avatar
4.8v is plenty, for standard servos. If you're running digis or high torques, then 6v is better
Oct 06, 2009, 10:46 PM
Indoor Free Flight Modeler
If you run 6V just make sure the servos you have will run on 6 volts.
Oct 06, 2009, 10:53 PM
guitarflyer
thanx alot guys im planning on running 4 triple a or u you go 4 double a's
Oct 06, 2009, 11:32 PM
Xpress..'s Avatar
^No, run rechargables. MUCH better. For 4 AA's, a 5 cell NiMH will replace them.
Oct 07, 2009, 12:30 AM
guitarflyer
Quote:
Originally Posted by Xpress..
^No, run rechargables. MUCH better. For 4 AA's, a 5 cell NiMH will replace them.
of cource rechargeable but could i get away with triple a nimh.i think they are 650 mah


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gonna try 9 cells in my Bandit with Hacker B40 8S ferradas Electric Sailplanes 5 May 15, 2003 09:47 PM
Gonna try this.With a question dirtdiver Foamies (Kits) 0 Oct 20, 2002 05:16 PM
Plane designed to try out GWS EDF 50 iamDerrick Parkflyers 1 May 05, 2002 12:20 PM
OK - gonna try the Cox Viper one more time.... Steve McBride Foamies (Kits) 74 Jul 13, 2001 06:21 PM
Gonna try Lil Hornet (battery question) kenny_dilger Parkflyers 9 Jun 01, 2001 11:33 PM