Robbe Tigra and Kangke F3D-30 Large Electric Pylon Racers - RC Groups
Thread Tools
This thread is privately moderated by gstew, who may elect to delete unwanted replies.
Sep 16, 2001, 09:28 PM
Trader Rating: 5
Registered User

Robbe Tigra and Kangke F3D-30 Large Electric Pylon Racers

Kangke International F3D-30 pylon racer airframe only. NIB, about 470 sq in, needs 10-16 cells and a mid-sized brushless motor. All molded, full ARF, even the holes are drilled for the control horns. This is my spare, they fly REALLY WELL, hot & fun!!!

Retails new for $158, $125.

Robbe Tigra pylon racer. One of the blems sold by Aveox where the original covering needed to be pulled off and replaced, this VERY RARE kit is a beauty when finished. It is about the same size and weight as the Kangke F3D-30, with a larger fuselage, but ligher (although similarly sized) wing. It was designed for a European 12 cell pylon racing class, but most reports I've seen have people flying them with 14-16 cells. I'd started the kit by punching out the ply parts and pulling the covering off the wing.

Originally Aveox sold the blems for $200, $150.

Buyer pays shipping. Email me at ' '.

Greg Stewart (Minneapolis, MN, USA)
Sign up now
to remove ads between posts
Sep 17, 2001, 09:36 AM
Trader Rating: 5
Registered User
Deals pending on Tigra. F3D-30 still available.

Last edited by gstew; Sep 17, 2001 at 11:23 AM.