Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 24, 2012, 04:22 AM
ChuckTseeker is offline
Find More Posts by ChuckTseeker
Registered User
ChuckTseeker's Avatar
have bought a Habu 2 airframe and am looking at getting a better sounding EDF than the stock one and wondered if this one would fit the bill?

http://www.hobbyking.com/hobbyking/s..._1200watt.html

it says it makes 1.7kg of thrust, is this more or less than the stock unit? i have searched but couldn't find anything on this 10 blade fan.
This model is the 4s version they also do a 6S version for 2.4kg of thrust but i was thinking the 6s might be a bit of a squeeze and heavy to get into the Habu?

so anyone fitted this 4s or 6s fan? anyone give me any info about weather the 4s will be at least as powerful as the stock system?

cheers chuck
Sign up now
to remove ads between posts
Old Oct 24, 2012, 05:09 AM
crispypilot is offline
Find More Posts by crispypilot
Registered User
I have a change sun ten blade fan with a velocity 2900kv. It sounds great and I get between 6-8 lbs of thrust on a 6s setup with 100 amp esc.
RCG Plus Member
Old Oct 24, 2012, 09:10 AM
kalmon is offline
Find More Posts by kalmon
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by ChuckTseeker View Post
have bought a Habu 2 airframe and am looking at getting a better sounding EDF than the stock one and wondered if this one would fit the bill?

http://www.hobbyking.com/hobbyking/s..._1200watt.html

it says it makes 1.7kg of thrust, is this more or less than the stock unit? i have searched but couldn't find anything on this 10 blade fan.
This model is the 4s version they also do a 6S version for 2.4kg of thrust but i was thinking the 6s might be a bit of a squeeze and heavy to get into the Habu?

so anyone fitted this 4s or 6s fan? anyone give me any info about weather the 4s will be at least as powerful as the stock system?

cheers chuck
Chuck I'm not sure how shipping down under would be but Gary at EffluxRC has probably the ultimate all alloy 6S setup for the Habu. Personally I'd be nervous with a metal setup from HK. Metal requires extreme precision in manufacturing.

-Brian
Old Oct 24, 2012, 02:06 PM
jgalexander is offline
Find More Posts by jgalexander
Flying Full Size & Fun Size :)
jgalexander's Avatar
Not to worry, it isn't a metal fan, just the shroud and tailcone. The fan is still plastic. Pretty sweet sounding setup. https://www.rcgroups.com/forums/show....php?t=1712422
Old Dec 27, 2012, 09:03 AM
MJB9 is offline
Find More Posts by MJB9
ARMY ATC (93C)
MJB9's Avatar
Quote:
Originally Posted by Diesel6401 View Post
Dang No PNP that's a bummer.........


Looks sick though! I hope like mentioned the servos are swapped. I changed my V1 over to HS65s in the airlerons and HS85mg in the tail.
Did you use HS85MG for both the elevator and the rudder? or just the rudder? Also, did you consider the HS82MG? I only ask that because the 82MG is about half the cost of the 85MG. the 85MG has a bit more torque, but also a little heavier. Amazon has the 82MG's for $15 each :-)

If two 82s/85s fit in the tail, I'm going to order two 82's. I have HS65MGs for everything else including the flaps. Having these larger servers in the tail will help a lot wiht CG on a 5S/6S setup.
Old Dec 27, 2012, 10:42 AM
nickelbn1 is offline
Find More Posts by nickelbn1
fly and then fly some more!
nickelbn1's Avatar
I dont see why the hs82mg wouldn't work. Definitely strong enough
Old Dec 27, 2012, 12:56 PM
Mugen4Lfe is offline
Find More Posts by Mugen4Lfe
Registered User
Mugen4Lfe's Avatar
I've heard the hs82 is faster than the hs85, but the 82 doesn't center as well. But I don't speak from experience.
Old Dec 28, 2012, 02:39 PM
AV8TRX is offline
Find More Posts by AV8TRX
Registered User
AV8TRX's Avatar
OK this may be a silly question as this thread is epic and I haven't seen the whole thing. I Have been flying the Habu in Phoenix FS but I can't seem to find them on the net for sale. Has it just been replaced by the Habu2? I am looking toward a UMX MIG 15 for a starter EDF but I like this one ALOT!
Old Dec 28, 2012, 02:55 PM
jgalexander is offline
Find More Posts by jgalexander
Flying Full Size & Fun Size :)
jgalexander's Avatar
You are correct! Habu2 is the replacement for the Grey/Blue/Yellow v1 Habu. If you'd prefer the v1 Habu, they pop up for sale in the classifieds from time to time (I actually have one that I'll be listing one of these days).
Josh
Old Dec 28, 2012, 08:27 PM
AV8TRX is offline
Find More Posts by AV8TRX
Registered User
AV8TRX's Avatar
Cool Thank you!
Old Dec 29, 2012, 08:48 PM
AV8TRX is offline
Find More Posts by AV8TRX
Registered User
AV8TRX's Avatar
Never mind. I think I found it.
Old Jan 03, 2013, 06:24 PM
BlackBeast is offline
Find More Posts by BlackBeast
Registered User
BlackBeast's Avatar
Just finished my new tiger paint scheme...
Last edited by BlackBeast; Jan 05, 2013 at 09:34 PM.
Old Jan 11, 2013, 07:26 PM
Diesel6401 is offline
Find More Posts by Diesel6401
Memento Mori
Diesel6401's Avatar
Quote:
Originally Posted by mjbennett9 View Post
Did you use HS85MG for both the elevator and the rudder? or just the rudder? Also, did you consider the HS82MG? I only ask that because the 82MG is about half the cost of the 85MG. the 85MG has a bit more torque, but also a little heavier. Amazon has the 82MG's for $15 each :-)

If two 82s/85s fit in the tail, I'm going to order two 82's. I have HS65MGs for everything else including the flaps. Having these larger servers in the tail will help a lot wiht CG on a 5S/6S setup.
Yup I used the 85MG on the rudder and the elevator. Took just a little foam carving to fit, nothing major. No issues.
Old Jan 11, 2013, 07:32 PM
Diesel6401 is offline
Find More Posts by Diesel6401
Memento Mori
Diesel6401's Avatar
Question for all, my Habu is a starting to show her age and repeated belly landings are starting to take it's toll. I'm thinking of yanking the guts out of her and maybe buying a E-Flite F86 and using all the Habu gear in that. I'm not retiring the Habu airframe just yet, so what is the most ballistic 4s setup for a Habu? Not looking to break the bank so what's cheap speed?!? I don't want to buy more batteries so that's why I'm sticking with 4s and when (down the road) if I ever get the F86 I won't need anything other then the airframe kit.
Old Jan 11, 2013, 08:45 PM
kalmon is offline
Find More Posts by kalmon
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by Diesel6401 View Post
Question for all, my Habu is a starting to show her age and repeated belly landings are starting to take it's toll. I'm thinking of yanking the guts out of her and maybe buying a E-Flite F86 and using all the Habu gear in that. I'm not retiring the Habu airframe just yet, so what is the most ballistic 4s setup for a Habu? Not looking to break the bank so what's cheap speed?!? I don't want to buy more batteries so that's why I'm sticking with 4s and when (down the road) if I ever get the F86 I won't need anything other then the airframe kit.
I used .5oz cloth and glassed the bottom of the plane using polycrylic. This added almost no weight and probably added a couple mph in drag reduction. Not to mention belly landings have virtually zero wear on the bottom anymore.

As for a 4S speed setup, I think Gary at Efflux RC has a 4200kv "hot wind" motor that paired with a bigger ESC would provide more speed.

-Brian


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Parkzone EDF jet HABU comox yqq Foamy EDFs 242 Dec 13, 2011 03:33 PM
Discussion Selecting an EDF/motor for 1st "JET" Texas Buzzard Electric Ducted Fan Jet Talk 22 Feb 01, 2008 02:52 PM
Looking for 1st EDF jet...Help? stegre Electric Ducted Fan Jet Talk 13 Jan 12, 2003 09:18 PM
Recommendation for 1st EDF Jet? HardAbz Electric Ducted Fan Jet Talk 14 Aug 08, 2001 01:06 AM
best edf jet to start with ? exowatt Electric Ducted Fan Jet Talk 19 May 04, 2001 01:39 AM