Thread Tools
Aug 09, 2012, 02:12 AM
Corsair Captain
Quote:
Originally Posted by mhills51 View Post
I'm thinking about selling one of my 250's What do you guys think? I just don't know which one to sell. I could sell my old reliable after all it has never been crashed. Or I just got all the parts to make number 2 just as reliable.
Align parts
motor, speed control, tail, head, OK never mind let me change this around What is not align....Frame lol! 502 gyro, eflite servos, hyperon tail servo.

I'm only selling it because I don't need two and I rarely use one anymore. Always flying the 500's and crashing the 450
How does it fly,, and what do you want for it?

Garry K.
Sign up now
to remove ads between posts
Aug 09, 2012, 08:02 PM
Retired
pitchp's Avatar
I just got my thunderpower lipos today. slowly slowly I'm getting all my stuff.









I'm still waiting for my TT parts, but I think i might skip that since i've been waiting for too long!! I'll do that on my next 250
Last edited by pitchp; Aug 09, 2012 at 08:15 PM.
Aug 09, 2012, 08:26 PM
Registered User
mhills51's Avatar
Quote:
Originally Posted by garryk View Post
How does it fly,, and what do you want for it?

Garry K.
it still gets a wag of death every once in a while. It stops just as soon as it starts I blame that on the gy520 I just put in the numbers everyone was using at the time and just left them. I also think it could be my bad inputs lol! one of the great 3d guys at our park flew it and it never gave him the wag. He loved it and couldn't believe how responsive the tail was.

anyone interested just pm me. Those are not scratches on the tail boom just bug guts that I have never cleaned off.
Aug 09, 2012, 10:43 PM
as much as I can
beenflying's Avatar
Quote:
Originally Posted by mhills51 View Post
it still gets a wag of death every once in a while. It stops just as soon as it starts I blame that on the gy520 I just put in the numbers everyone was using at the time and just left them. I also think it could be my bad inputs lol! one of the great 3d guys at our park flew it and it never gave him the wag. He loved it and couldn't believe how responsive the tail was.

anyone interested just pm me. Those are not scratches on the tail boom just bug guts that I have never cleaned off.
The weighted tail blade holders could make the tail better and reduce the chance of the WoD.
Aug 09, 2012, 10:46 PM
Registered User
mhills51's Avatar
Thanks I got a set, but they had more play than the HK's.
Aug 09, 2012, 11:16 PM
Retired
pitchp's Avatar
Quote:
Originally Posted by mhills51 View Post
Thanks I got a set, but they had more play than the HK's.
+1 I just received my align weighted blade grips too. And I must say the slop in it is not acceptable. Very disappointed there for align.
It would need some mods for it to be near perfect. The slop is like this guy is experiencing

Slop in the tail grip (0 min 44 sec)
Aug 09, 2012, 11:28 PM
as much as I can
beenflying's Avatar
Mine are like that too, but they work fine, and have done for a large number of flights. Centrifugal force, in this case, is your friend.
Aug 10, 2012, 12:05 AM
Registered User
Quote:
Originally Posted by pitchp View Post
I got my other canopy in the mail today. I just love these canopies. I plan to slowly replace all my helis with this canopy

pitchp, what is the difference in size compare to the HK250GT stock canopy?
Does the Align's good enough for 1000mah 3S battery?
Aug 10, 2012, 12:10 AM
Retired
pitchp's Avatar
Quote:
Originally Posted by daddoo View Post
pitchp, what is the difference in size compare to the HK250GT stock canopy?
Does the Align's good enough for 1000mah 3S battery?
I'm not too sure on the dimensions on the 1000mah lipos but you may need the EX canopies from fusuno or canomod. Just like this guy is using the fusuno EX. Notice he modded the hole

trex 250 crash (1 min 13 sec)
Aug 10, 2012, 01:00 AM
Registered User
Quote:
Originally Posted by pitchp View Post
+1 I just received my align weighted blade grips too. And I must say the slop in it is not acceptable. Very disappointed there for align.
It would need some mods for it to be near perfect. The slop is like this guy is experiencing

http://www.youtube.com/watch?v=ODjkZXdHnIE
Mine has the exact same slop (if not worse), but the heli flies fine for me...
Aug 12, 2012, 11:19 PM
RCHN #202
Dowquest's Avatar
Just found my MicroHeli head to have a stripped swash follower arm screw?
See pic for a better description...
Any body have this problem? I used green loctite and screwed it back in, will let it sit for 36hrs, and give it a try. Might be time for a dfc head...?
Aug 12, 2012, 11:53 PM
Retired
pitchp's Avatar
Quote:
Originally Posted by Dowquest View Post
Just found my MicroHeli head to have a stripped swash follower arm screw?
See pic for a better description...
Any body have this problem? I used green loctite and screwed it back in, will let it sit for 36hrs, and give it a try. Might be time for a dfc head...?
wow! DQ may be it's time to consider a DFC head and swash
Aug 12, 2012, 11:54 PM
Retired
pitchp's Avatar
as for me I received one of my items in the mail today. Yep that's right it's the EXTREME tail boom mount.




as usual slowly slowly all my parts are come in. I said before a probable 2 months on this build I may have to extend that to 4.
Aug 13, 2012, 01:53 PM
Agressive driver
How did you guys get your flybar centered? I can't get it centered enough to not cause excessive vibrations, even using calipers that measure 0.010". It is killing me because it is the second to last thing before I can fly the heli
Aug 13, 2012, 03:56 PM
Registered User
mhills51's Avatar
I would say your vibrations are coming from something else.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Official HeliMax AXE CP Thread with pics post em here!!?.. darklyte24 Micro Helis 10606 Nov 19, 2015 01:32 PM
Build Log Nitroplanes Lander 70mm F9F Panther EDF Build Log and Review The Don Foamy EDFs 38 Jun 03, 2014 10:09 PM
GWS Spitfire Build thread (with glassing tutorial) David Winter GWS (Grand Wing Servo) 156 Sep 14, 2009 05:42 AM
Discussion Build log or review for BulleT? raycsr Electric Sailplanes 3 Jan 30, 2009 01:03 PM
looking for build thread with upclose photos HIGHFLYER99 Foamies (Kits) 13 May 21, 2005 08:54 PM