Thread Tools
May 04, 2012, 11:12 PM
efx
efx
Rookie in training, heads up
efx's Avatar
Thanks guys. I'm already using the second hole from center which is the closest I can do. Can't use the first hole as that will not let me put in the link because it's next to the servo.

As for the end points, I already tried many settings from very low to medium, etc, but heli is just way to fast on the g250. The tarot was a tiny bit more docile, but still too fast.

So I will have to check the setting in the programmer for the tarot and see what I can get. I'm not sure about the atv, so I'll have to take out the manual as I can't remember what each of those things are, sorry it's been a while since I read that so need to refresh the brain on that and then try that. I appreciate the help.
Sign up now
to remove ads between posts
May 05, 2012, 12:07 AM
Agressive driver
Very excited, I just ordered my kit and electronics today!
May 05, 2012, 12:25 AM
Retired
pitchp's Avatar
welcome to the 250 club zanek

any questions just feel free and ask here.
May 05, 2012, 12:51 AM
Retired
pitchp's Avatar
Code RED!!! Price Drop On Spartan Quark $79!!!

http://www.hobbyking.com/hobbyking/s...dproduct=10484



Expect more of these price drops on all single axis gyros due to the popular demand of FBL units like the Tarot ZYX, Copterx FBL etc.. Get em while it's HOT!!!
Last edited by pitchp; May 05, 2012 at 01:23 AM.
May 05, 2012, 08:04 AM
Retired
pitchp's Avatar
some preety kool trick to do??

T REX 250 FPV.m4v (1 min 46 sec)
May 05, 2012, 11:34 AM
Registered User
That was pretty cool but to bad he used a 250 instead of a 450, cause it looked like a flying brick.I want to try that one day!
Steve
May 05, 2012, 11:37 AM
Retired
pitchp's Avatar
Quote:
Originally Posted by Kauaiguy
That was pretty cool but to bad he used a 250 instead of a 450, cause it looked like a flying brick.I want to try that one day!
Steve
may be he's on a budget, and he only owns a 250?? but it's kool to see the little 250 doing some little project like that.
May 05, 2012, 07:10 PM
Retired
pitchp's Avatar
quick tip on servo horn removal. It's very kool.


R/C Heli Tutorial #5 (Quick Tip) Safely Remove Servo Horns (0 min 41 sec)
May 06, 2012, 03:10 AM
Retired
pitchp's Avatar
250 DFC TT with Tarot ZYX fbl

くうさんT-REX250FBL ZYX DFC TEST (4 min 50 sec)
May 06, 2012, 11:20 AM
Registered User
mhills51's Avatar
They didn't glue the cf tt shaft into the metal retainers lol! Already been there!
May 06, 2012, 07:46 PM
Retired
pitchp's Avatar
what's a good permanent glue that can be used with CF and metal?
May 06, 2012, 08:51 PM
Registered User
mhills51's Avatar
only glue I can think of is quality slow set epoxy. That is what's holding mine now.
May 06, 2012, 09:20 PM
as much as I can
beenflying's Avatar
I was wondering that too. I've always used gap filling CA on tail boom brace ends, but was wondering if it would be strong enough for the 250 torque tube ends.
May 06, 2012, 09:25 PM
Registered User
mhills51's Avatar
The problem I have with CA is that it drys brittle while epoxy still has some flex.
May 06, 2012, 09:29 PM
Retired
pitchp's Avatar
Quote:
Originally Posted by beenflying
I was wondering that too. I've always used gap filling CA on tail boom brace ends, but was wondering if it would be strong enough for the 250 torque tube ends.
I know the CA is not strong enough for this torque tube project, but will epoxy be strong enough to take on the the heat and force applied to it?? I guess there's only one way to find out.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Official HeliMax AXE CP Thread with pics post em here!!?.. darklyte24 Micro Helis 10606 Nov 19, 2015 01:32 PM
Build Log Nitroplanes Lander 70mm F9F Panther EDF Build Log and Review The Don Foamy EDFs 38 Jun 03, 2014 10:09 PM
GWS Spitfire Build thread (with glassing tutorial) David Winter GWS (Grand Wing Servo) 156 Sep 14, 2009 05:42 AM
Discussion Build log or review for BulleT? raycsr Electric Sailplanes 3 Jan 30, 2009 01:03 PM
looking for build thread with upclose photos HIGHFLYER99 Foamies (Kits) 13 May 21, 2005 08:54 PM