Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 28, 2009, 06:28 AM
Electronics and RC
MegaTesla's Avatar
New Product

Micro counter rotating brushless system


It is really expensive ($65), but I thought some of you might be interested.

Edit: Now $19.99

Kv: 2000rpm/v
Weight: 13g

Link

Last edited by MegaTesla; May 20, 2010 at 05:32 AM.
Sign up now
to remove ads between posts
Sep 28, 2009, 04:42 PM
Team 30 Micro EDF
Mike Taylor's Avatar
Where does the second prop attach? All I see in the photo is a single prop mount.
Sep 28, 2009, 05:18 PM
Electronics and RC
MegaTesla's Avatar
I think they only attached one prop adapter for the photo.

Edit: It seems as if the second prop attaches directly to the front motor.
Last edited by MegaTesla; Oct 01, 2009 at 03:37 AM.
Sep 28, 2009, 10:00 PM
Registered User
SMRTIC's Avatar
One prop mounts on the prop adapter, the other attaches to the face of the front outrunner. Common setup on the outrunner counter-rotating drives.
Sep 29, 2009, 12:43 AM
Team30 Micro EDF
NitroCharged's Avatar
...now all I see is a half dressed lady.... ...

what was this thread about again...?.....

Sep 29, 2009, 01:18 AM
Team Hitec, Customer Support
Xpress..'s Avatar
Yeah, forward prop goes onto the adapter, then the second prop will mount up on another adapter that will screw to the forward motor mount, where the black spacer is
Latest blog entry: Weekender Warehouse
Sep 29, 2009, 11:14 PM
SlingWinger

Bugatti time


Up until now I had a good excuse for not building a micro Bugatti...
Sep 30, 2009, 01:07 AM
Feldpilot
Karloff's Avatar
Oh I like! And what could be done below:

Oct 01, 2009, 12:49 AM
Registered User
Amp Abuser's Avatar
There is not a a shaft within the outer front motors. Its just a double motor that could have a prop mounted on both its ends. I was wanting something like this..
Oct 01, 2009, 12:51 AM
Registered User
Amp Abuser's Avatar
They may lower the price once it does'nt sell like hot cakes.
Oct 01, 2009, 03:50 AM
Electronics and RC
MegaTesla's Avatar
Quote:
Originally Posted by Amp Abuser
There is not a a shaft within the outer front motors. Its just a double motor that could have a prop mounted on both its ends. I was wanting something like this..
I doubt that it works like that, but I'll wait patiently until someone buys this and let us know..
Oct 01, 2009, 07:39 AM
Registered User
From the photo it looks like it hasn't got enough wires! (I assume its just a funny photo). Also don't forget the cost of 2 ESCs!

I always had a daft idea of a Bugati using differential torque for roll control, but never got around to it.

Thanks for starting the post MT.

Rob
Oct 01, 2009, 07:59 AM
Electronics and RC
MegaTesla's Avatar
Quote:
Originally Posted by RobT
From the photo it looks like it hasn't got enough wires! (I assume its just a funny photo). Also don't forget the cost of 2 ESCs!

I always had a daft idea of a Bugati using differential torque for roll control, but never got around to it.

Thanks for starting the post MT.

Rob


To save weight they heat shrink the 3 enamelled wires together.
Oct 01, 2009, 08:59 AM
Team30 Micro EDF
NitroCharged's Avatar
It has enough wires, there are two pieces of heatshrink, each with 3 wires in them.

Here's how the props hook up:

Oct 01, 2009, 09:05 AM
Electronics and RC
MegaTesla's Avatar
Thanks for posting that picture!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Counter Rotating BL System 375W TheDustyPagan Power Systems 15 Mar 27, 2016 09:23 PM
Question Counter rotating brushless motors. Mac Obsessed Power Systems 7 Nov 11, 2008 12:14 PM
Cool Counter Rotating brushless motor at Hobby City cryhavoc38 Power Systems 14 Apr 05, 2008 04:36 PM
Discussion Counter-Rotating Brushless & Hollow Shaft Butch777 Electric Plane Talk 46 Apr 02, 2008 01:16 AM
Scratch-built sub-micro counter rotating rotors helicopter. Lynxman Coaxial Helicopters 4 Aug 08, 2005 06:29 PM