Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by jackerbes, who may elect to delete unwanted replies.
Sep 27, 2018, 12:54 AM
Registered User
davereap's Avatar
COG no problem... you can find it using sketchup....
https://www.rcgroups.com/forums/show...postcount=1367

one wing, or as many wings as you like, its calculated as a percentage of the total horizontal areas and is an easy process....

I work on 20% and 25% areas... 22.5 % always is fine for flying...

for 3D models the same method is used on the vertical areas and the same %ages also apply
Last edited by davereap; Nov 06, 2018 at 08:38 PM.
Sign up now
to remove ads between posts
Sep 27, 2018, 06:10 AM
Careful,.. confident,.. CRASH!
Dukejet's Avatar
Agree Dav....
Finding a long grass field helps to keep it from looking ugly
Sep 27, 2018, 09:11 AM
I Look, Listen, and Learn
Timbo383's Avatar
Quote:
Originally Posted by Dukejet
Agree Dav....
Finding a long grass field helps to keep it from looking ugly
Funny you mention that. Flew the maiden of my recent build over a small field of tall grass...lots of rain these past two weeks... and it crashed on the only bare spot in the field.Oh and it also looks ugly now.
Last edited by Timbo383; Sep 27, 2018 at 05:00 PM.
Sep 27, 2018, 02:11 PM
Jack
jackerbes's Avatar
That only happens when you are not holding your mouth right...

When I want a test glide I do a chest high level push/launch with elevator and ailerons leveled and use enough arm speed to get it up close to a landing speed. And look for a steady level descent to the ground.

If that looks about right, I add a little power and do it again hoping for a continuous low level flight.

I almost always have used my CG stand at home and know that the CG is realistic or close to right if I know the location

Jack
Sep 27, 2018, 09:46 PM
Registered User
projects a getting cleaned up so my blitz is getting closer
Nov 01, 2018, 09:24 PM
flyin' fool
goldguy's Avatar
Have built this design with the KFm2 and the 4. Both fly the same, including inverted, except the 2 is lighter, so flies better.
Nov 09, 2018, 09:30 AM
http://bit.ly/2zm6gK7
I am doing some studies (CFD and hopefully Experimental) on KF-airfoils and development surrounding this type of airfoil for small UAS (let's be honest, pretty much just foamies for fun). In this thread I am discussing my current method for developing the airfoils in CAD for mass-producing slight variations for testing. If you are interested in following, or giving input, see here:

https://www.rcgroups.com/forums/show...irfoil-Studies
Yesterday, 02:42 PM
Registered User
Sr71freak's Avatar
12ft KFm3 bus is no more. Put it in combat at Flitefest Texas a few weeks ago. New one airframe was already in the works so version 3 will debut soon.


off to meet her fait. by this point both axles where broken, two wheels where missing, and her nose and battery tray was mostly duct tape.


me and my new friend (the guy who took down the bus)


that's his propeller that got stuck in my wing, still can't believe that little plane brought down the 12x9 foot airplane. lol


it made a glorious sound when it went in nose first at full power!


so much carnage.

Yesterday, 08:14 PM
I Look, Listen, and Learn
Timbo383's Avatar
Aw man, I wanted to attend flight fest but work interfered, looks like I missed out on the fun. It's good when you can laugh about a destruction of a plane.
Yesterday, 10:14 PM
Too old to rock-n-roll...
TooJung2Die's Avatar
Go big or go home. Or go home in a couple of garbage bags. That must've been awesome.
Today, 11:52 AM
Registered User
Sr71freak's Avatar
It was, there's video out there, I find some for ya.
Today, 03:41 PM
flyin' fool
goldguy's Avatar
If your not breaking foam, your not having fun.

WOW, that's a lot of fun all at once.
Today, 03:53 PM
"long stretch of water..."
coongoola's Avatar
Quote:
Originally Posted by Sr71freak
It was, there's video out there, I find some for ya.
I've seen video of it a while back. I'll see if I can work out where it was.

Pat
Today, 05:31 PM
Registered User
Sr71freak's Avatar
School Bus Down (9 min 19 sec)


HERE'S ONE I FOUND.
Today, 05:49 PM
Out Standing In The Field
RexGalore's Avatar
At 3:00, but the bus stayed up longer than the attacker did - bus wins!
Latest blog entry: Rare Bear


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ** Kline-Fogleman Airfoiled Flying Wing ** Tony65x55 Foamies (Scratchbuilt) 3960 Jul 20, 2018 07:01 AM
Idea 40" Depron Dynamite, Kline fogleman Depron build dougmontgomery Hand Launch 693 Jul 11, 2017 10:48 PM
Cool Here is my KFm-5 DLG GLider (Kline-Fogleman) dougmontgomery Foamies (Scratchbuilt) 151 Apr 21, 2014 10:08 AM
Video Kline Fogleman Airfoil on a flying wing Tony65x55 Electric Plane Talk 3 Jan 30, 2009 08:37 PM
Discussion Kline-Fogleman Airfoil on a flying wing Tony65x55 Modeling Science 1 Aug 20, 2006 12:14 PM