New Products Flash Sale
Thread Tools
Old Oct 04, 2009, 05:21 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Quote:
Originally Posted by jesolins
Yes, you should trim so that applying power make it go straight up. Also put in -40 Expo for pitch and roll and 60% for the pitch and roll rates. Make sure you are using ACRO mode on your Tx.
Cheers,
Jim
Thanks for the help Jim,
cant wait for the props to get hear.

Is there any other tips are tricks to setting these up??

Thanks G
Sign up now
to remove ads between posts
Old Oct 04, 2009, 08:37 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Hey does anyone have any idea what the ISP and ABC on the board is for??
Thanks G
Old Oct 04, 2009, 09:00 PM
jesolins is offline
Find More Posts by jesolins
Tri-Quad-Hexa-Octo-copters!!
G,
"In-circuit serial programmer" which can be used to flash the ATMEGA with other flight firmware. Not sure about the A, B, C.
Cheers,
Jim
Quote:
Originally Posted by G-unit
Hey does anyone have any idea what the ISP and ABC on the board is for??
Thanks G
Old Oct 04, 2009, 09:40 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Thanks Jim
Old Oct 05, 2009, 11:00 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Well i got some props in the mail today but they are the tri-props i ordered them before you guys told me they are junk!! and guess what all the CW props where the bushings go in are all loose-fitting thats just bull ,any ways i also ordered the 9x6 tri-prop so i checked all of them and the bushing fit perfect so i put them on to try it in the house the wind is still ripping and what a difference with these props seems to be a lot more stable with them ,I ran it for just a couple of minuets because i don't want to hurt the electronics don't know if they will over heat them.
I should have my 8x4 props by Wednesday i hope and we will see how it goes.
Old Oct 05, 2009, 11:45 PM
tend2it is offline
Find More Posts by tend2it
Wow That's Cool!
tend2it's Avatar
Quote:
Originally Posted by G-unit
Well i got some props in the mail today but they are the tri-props i ordered them before you guys told me they are junk!! and guess what all the CW props where the bushings go in are all loose-fitting thats just bull ,any ways i also ordered the 9x6 tri-prop so i checked all of them and the bushing fit perfect so i put them on to try it in the house the wind is still ripping and what a difference with these props seems to be a lot more stable with them ,I ran it for just a couple of minuets because i don't want to hurt the electronics don't know if they will over heat them.
I should have my 8x4 props by Wednesday i hope and we will see how it goes.
I thought that I saw some blue aluminum prop mounts in the pics and demo vid ... that screw down onto the props ... isn't that how they are mounted?
--Eric--
Old Oct 05, 2009, 11:52 PM
RC_Drones is offline
Find More Posts by RC_Drones
Registered User
Quote:
Originally Posted by jtansoon
Hi,
The frames look nice...any idea where to get them...

thanks
I have two frames for sale.
Old Oct 05, 2009, 11:58 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Ya but the hole in the prop is say 7mm and my prop adapter is 4mm then u need a spacer to center the prop and that is the problem.The spacer dont fit right.
Old Oct 05, 2009, 11:59 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Quote:
Originally Posted by RC_Drones
I have two frames for sale.
I like the one on the right!!

The one on the left looks like the one i have.
Old Oct 06, 2009, 12:32 AM
RC_Drones is offline
Find More Posts by RC_Drones
Registered User
Quote:
Originally Posted by G-unit
I like the one on the right!!

The one on the left looks like the one i have.
Yes, the one on the left is the standard frame of X-500D.
Old Oct 06, 2009, 02:27 AM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
Quote:
Originally Posted by RC_Drones
I have two frames for sale.
sizes? from motor to motor how many cm?
Old Oct 06, 2009, 03:54 AM
RC_Drones is offline
Find More Posts by RC_Drones
Registered User
Quote:
Originally Posted by Quad_Addict
sizes? from motor to motor how many cm?
It's 50cm.
Last edited by RC_Drones; Oct 07, 2009 at 03:26 AM.
Old Oct 06, 2009, 04:34 AM
SebastianJ is offline
Find More Posts by SebastianJ
Droner
SebastianJ's Avatar
Quote:
Originally Posted by RC_Drones
I have two frames for sale.
Do you have any electronics for sale as well?
Old Oct 06, 2009, 07:05 PM
simonjardine is offline
Find More Posts by simonjardine
MultiRotor Jedi
simonjardine's Avatar
What is the weight of the frame? Is there any flex or do the booms twist?

I had a frame similar to this one. It's now in my museum as the booms had too much flex, it was heavy too at 550grams!!

Some video G would be awesome...

Simon
Old Oct 06, 2009, 10:51 PM
RC_Drones is offline
Find More Posts by RC_Drones
Registered User
Quote:
Originally Posted by simonjardine
What is the weight of the frame? Is there any flex or do the booms twist?

I had a frame similar to this one. It's now in my museum as the booms had too much flex, it was heavy too at 550grams!!

Some video G would be awesome...

Simon
The rigidity of boom is important. Some structural reinforcements were applied to increase the rigidity and flying stability. The weight of this frame is 235 grams included landing gears.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Xaircraft X600D Quad Zirt57 Multirotor Talk 1241 Mar 30, 2012 06:08 PM
New Product Xaircraft X500-D $300 ARF brushless quad from China SebastianJ Multirotor Talk 1097 May 31, 2010 11:06 AM
Discussion esc for Xaircraft X500-D oded Multirotor Talk 2 Jan 15, 2010 04:28 PM
Discussion Feds Probe Cadmium in Kids' Jewelry From China dumbthumbs Chit Chat 1 Jan 11, 2010 01:49 PM
Discussion New Quad from Parrot to use with an iPhone darinf Coaxial Helicopters 9 Jan 07, 2010 03:12 PM