New Products Flash Sale
Thread Tools
Old Oct 11, 2009, 11:40 AM
_Spud_ is offline
Find More Posts by _Spud_
In the middle of nowhere
_Spud_'s Avatar
G.

How much flight time are you getting?

What happens when the lipo starts getting low? Does it give you much time to land?


Cheers,
Spud.
Sign up now
to remove ads between posts
Old Oct 11, 2009, 12:44 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Hey Mike,
I have not timed it ,but it does have a low battery alarm ,but before that goes off i can tell because it will start not turning to the right as good with a full battery.so it gives u plenty of time to land.
Old Oct 11, 2009, 08:25 PM
3DBro is offline
Find More Posts by 3DBro
Registered User

3 blade prop replacement


Quote:
Originally Posted by G-unit
Well i got some props in the mail today but they are the tri-props i ordered them before you guys told me they are junk!! and guess what all the CW props where the bushings go in are all loose-fitting thats just bull ,any ways i also ordered the 9x6 tri-prop so i checked all of them and the bushing fit perfect so i put them on to try it in the house the wind is still ripping and what a difference with these props seems to be a lot more stable with them ,I ran it for just a couple of minuets because i don't want to hurt the electronics don't know if they will over heat them.
I should have my 8x4 props by Wednesday i hope and we will see how it goes.
So G-Unit what props did you end up using. I have a kit coming and need to buy some props to. From what I have read the front and back props are the same but different from the left and right props which are the same.
Old Oct 11, 2009, 08:59 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
You need these MPI Counter Rotating Prop Set 8 x 4.5 and u will need two packs so get 4
I got mine here http://www.radicalrc.com/shop/?shop=...3123864&cat=34

Hey if u need help let me know,I have a couple of tips to help.
Old Oct 11, 2009, 10:16 PM
importon is offline
Find More Posts by importon
Registered User
good news.... I emailed the seller in california and this is what they had to say.

"Yes,650D will be out , then x500D factory reproducing .

will email when got in stock around 30 days"


Hey g-unit, where you able to find any more information about software for tuning with this thing? It looks like it comes stock with all the hardware needed to altitude hold....
Old Oct 11, 2009, 10:29 PM
G-unit is offline
Find More Posts by G-unit
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
No,the only software is what comes with it,u can map the channel's and test the motors that is it,as far as altitude hold u need a barometer witch this don't have.
Old Oct 11, 2009, 10:54 PM
importon is offline
Find More Posts by importon
Registered User
bummer...

Quote:
Originally Posted by G-unit
No,the only software is what comes with it,u can map the channel's and test the motors that is it,as far as altitude hold u need a barometer witch this don't have.
Old Oct 12, 2009, 01:10 AM
Sammy B is offline
Find More Posts by Sammy B
Fly, Crash, Build, Fly!!!
Sammy B's Avatar
So does anyone know what the price will be for the x650?
Old Oct 12, 2009, 01:29 AM
importon is offline
Find More Posts by importon
Registered User
I think we'd all like to know.... And does it come with gps or is it just gps ready????

Quote:
Originally Posted by Sammy B
So does anyone know what the price will be for the x650?
Old Oct 12, 2009, 01:56 AM
Sammy B is offline
Find More Posts by Sammy B
Fly, Crash, Build, Fly!!!
Sammy B's Avatar
Yah from what I have read, just gps ready or capable. I am getting back into the quad scene after a 6 month break. I have time again so, I dusted off my spectrolutions bl board and am looking into other options as well. Right now im just trying to catch up on everything, the x650 is sounding good so far.
Old Oct 12, 2009, 02:07 AM
Quad_Addict is offline
Find More Posts by Quad_Addict
Suspended Account
Quote:
Originally Posted by importon
good news.... I emailed the seller in california and this is what they had to say.

"Yes,650D will be out , then x500D factory reproducing .

will email when got in stock around 30 days"


Hey g-unit, where you able to find any more information about software for tuning with this thing? It looks like it comes stock with all the hardware needed to altitude hold....

good news, im guessing if they sell it as a artf package like the x500 it will be close to $499 thats just my guess. but it is sexy
Old Oct 12, 2009, 02:38 AM
importon is offline
Find More Posts by importon
Registered User
Where do you think the extra $200 is going? bigger motors? better board with more sensors? gps? or just sleek design?

Quote:
Originally Posted by Quad_Addict
good news, im guessing if they sell it as a artf package like the x500 it will be close to $499 thats just my guess. but it is sexy
Old Oct 12, 2009, 07:01 AM
gundamnitpete is offline
Find More Posts by gundamnitpete
Team White Llama!
gundamnitpete's Avatar
paid for mine today
Old Oct 12, 2009, 07:21 AM
importon is offline
Find More Posts by importon
Registered User
cool. the x500 or x650? and from where?


Quote:
Originally Posted by gundamnitpete
paid for mine today
Old Oct 12, 2009, 08:16 AM
3DBro is offline
Find More Posts by 3DBro
Registered User

Prop type


Quote:
Originally Posted by G-unit
You need these MPI Counter Rotating Prop Set 8 x 4.5 and u will need two packs so get 4
I got mine here http://www.radicalrc.com/shop/?shop=...3123864&cat=34

Hey if u need help let me know,I have a couple of tips to help.
Thanks. Radical RC is about 10 min from my house. I live in Dayton Ohio so that will work out great. I will keep you in mind on tips once I get my kit working


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Xaircraft X600D Quad Zirt57 Multirotor Talk 1241 Mar 30, 2012 06:08 PM
New Product Xaircraft X500-D $300 ARF brushless quad from China SebastianJ Multirotor Talk 1097 May 31, 2010 11:06 AM
Discussion esc for Xaircraft X500-D oded Multirotor Talk 2 Jan 15, 2010 04:28 PM
Discussion Feds Probe Cadmium in Kids' Jewelry From China dumbthumbs Chit Chat 1 Jan 11, 2010 01:49 PM
Discussion New Quad from Parrot to use with an iPhone darinf Coaxial Helicopters 9 Jan 07, 2010 03:12 PM