Thread Tools
Sep 23, 2009, 05:40 PM
Registered User
Discussion

Aeroflyte Skylark rubber powered model - Australia


Hi guys,
I'm looking for an Aeroflyte Skylark rubber powered model - kit or plan - it went out of production some years ago.

If you can help - that'd be great.

Little Eagle
Sign up now
to remove ads between posts
Sep 23, 2009, 11:58 PM
Is my CG correct?
discostu956's Avatar
I was looking through some old stuff the other day and came accross some aeroflyte things. I was hoping to build another one off the plans with my kids, but the plans were more instructions not plans, IE didn't show the parts needed and were angled drawings of what to do, no plans as you would need to build one
Sep 24, 2009, 12:20 AM
Magicsmoke maker
Inflexo's Avatar
you can try most Toyworld stores as they usually still have old stock.
Sep 24, 2009, 05:13 AM
Registered User

interesting discostu


That's interesting Discostu - I'd be very interested to know which Aeroflyte kits in particular it is that you found. You can build good models from the plans only, but yes....- those elusive rib templates! I'm a bit of perfectionist and for some reason I'm obsessed with getting the original rib template design, which isn't on the plan, for an Aeroflyte Bambi - even though I have a pretty good idea how they went - the wing root rib, for example, W1 - is on the plan for the Bambi, but not the rest - so I really need someone with a Bambi kit that was never built and doesn't want it.

I agree with you pldaniels that there are a few Aeroflyte kits in toyworld stores, - but not many - mostly the gliders they were producing in the last ten years - like the 'Shrike' - and 'Aquarius' - and in rubber - the Osprey and the Ibis. These last two have been taken up by Pacific Balsa and are being sold by 'ozzietraders'
Sep 24, 2009, 07:28 AM
Is my CG correct?
discostu956's Avatar
It was plans I had little eagle.

Silly me Must have looked at the wrong plan the other day. Posted the earlier comment when I was at work. Just went out to the garage and looked then and I have 2 plans there for the aeroflyte raven out there, and they show wing rib template, which on that one is the same all the way along. Its a full plan. I think I was looking at some for an old cherokee control line plane
Sep 24, 2009, 08:30 AM
Registered User

Aeroflyte Raven


thanks for that - yes I realised just after I sent my last one that it was plans you had - not kits - and therefore I was barking up the wrong tree!

good luck with the Raven - I have one too but it's down the priority list a bit
Sep 24, 2009, 09:19 AM
de-registered abuser
gouch's Avatar
I scanned the plans for a rubber powered guillows c-170 a while back if that's any interest?
Sep 25, 2009, 03:45 AM
Is my CG correct?
discostu956's Avatar
I wont be building the raven, though i do have plans for one of the small gliders that they did. Might scale it up slightly and put in some micro gear-proect to do with my son


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Out of curiosity... 60" R/C rubber powered model? Accu157 Free Flight 6 Mar 13, 2007 03:37 AM
Conversion of rubber powered model planes to electric R/C dave_lilley Scratchbuilt Indoor and Micro Models 24 Apr 09, 2003 07:20 PM
Conversion of rubber powered model planes to electric R/C dave_lilley Site Chat 0 Nov 08, 2002 01:28 AM
Conversion of rubber powered model planes to electric R/C dave_lilley Scratchbuilt Indoor and Micro Models 0 Nov 08, 2002 01:28 AM
Article Conversion of rubber powered model planes to electric R/C Gary Gullikson Electric Plane Talk 0 Nov 08, 2002 12:00 AM