E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC $50 shipped
E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC........the first $50 gets it shipped conus.....
my paypal is email@example.com
60-Amp Pro Switch-Mode BEC Brushless ESC
When performance matters in your high-current applications look no further than the E-flite 60-Amp Pro Switch Mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated Switch-Mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 60 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic endcaps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range, and more, the E-flite 60-Amp Pro Switch Mode ESC is truly a ‘pro series’ electronic speed control.
* Up to 60-amp continuous current with proper air flow, 75-amp peak
* 5-volt Switch-Mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage
* Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
* 3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
* Finned heat sinks
* Programmable motor braking
* Safe power-arm mode prevents accidental starts
* Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V), or 70% of battery starting voltage
* Programmable soft start for helis and airplanes
* Auto motor shut down if signal is lost or there is interference
* Programmable timing—5 user-selectable ranges for use with a larger variety of brushless motors
* Programmable throttle input range (1.1–1.9 ms or 1.2–1.8 ms)
* Utilizes new smaller MOSFETs technology to minimize weight
* Radio System Power On/Off Switch
* Optional RS232 Serial Link available for programming
* Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
E-Flite part number EFLA1060.
Last edited by java8297; Sep 20, 2009 at 10:07 PM.
Trader Rating: 61
If it hasn't sold PM me I will definitely take it
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC||flyingrandy55||Aircraft - Electric - Power Systems (FS/W)||2||Aug 20, 2009 08:26 PM|
|For Sale||E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC||daylight99||Aircraft - Electric - Power Systems (FS/W)||3||Dec 06, 2008 12:11 AM|
|Wanted||E-flite 60 Amp Pro Switch Mode BEC Brushless ESC||ASAMech||Aircraft - Electric - Power Systems (FS/W)||0||Dec 02, 2008 08:22 AM|
|Sold||E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC $65 Shipped||CGReload||Aircraft - Electric - Power Systems (FS/W)||3||Oct 26, 2008 06:56 PM|
|Sold||NIB E-flite 60-Amp Pro Switch-Mode BEC Brushless ESC||Heat Sink||Aircraft - Electric - Power Systems (FS/W)||2||Oct 10, 2008 12:27 PM|