New Products Flash Sale
Thread Tools
Old Apr 19, 2003, 06:25 PM
cfossa is offline
Find More Posts by cfossa
Registered User
cfossa's Avatar

The best of both worlds


What a day! Started out early this morning with several flights on my SwitchBack 3D while the winds were still low. After lunch, when the winds picked up, it was off to the club field to fly my glow powered Sig Somethin Extra (kind of like a glow powered MiniFlash).

Now if I can sneak in some time on the TM before sunset ...

Hope you guys had a good flying day too.

Carl
Sign up now
to remove ads between posts
Old Apr 19, 2003, 06:43 PM
j_z_123 is offline
Find More Posts by j_z_123
BOSS
j_z_123's Avatar
Talk about a GREAT flying day! I woke up at 11:00 am and went outside, very little wind, so I went to the field, with the Tiny-x and there was a thermal in the middle of the field, plus I was flying into the wind and I almost lost sight of it, I thought to myself, boy while im up there I should do some aerobatics!. I did 6 rolls in a row and a loop to a roll, then some inverted, but this was the first time I ever did this!, I did a inside loop! How sweet! THis afteroon I has taking out my battery and one of my cf wheels came off. So I tried to fix it but no luck so I took off the other wheel. Went flying again with a prop saver and the wait of the wheels off really made a difference, I might of had 7 seconds vertical all on a S2!!


Jon
Old Apr 19, 2003, 06:53 PM
aeropenguin is offline
Find More Posts by aeropenguin
Who Says Penguins Can't Fly?
aeropenguin's Avatar
nope; not me
winds were up, but SO WHAT? I still HAD to maiden my Slow Stick
try one: forgot to extend radio antenna, lost control after 20 feet, broke prop
try two: winds gusted harder, even though the second I did take off it was at zero , and flipped the poor thing over, nose in, and both of the two tail surfaces broke off; not cleanly might I add. CA? Doesn't hold. Went home pi$$d off.
Did I learn a lesson? NO WAY! oh well, for the balsa ships, I leaned a lesson to wait for evening or morning for maiden. Foam un-breakables? nope!

-aeroP
Old Apr 19, 2003, 08:16 PM
hoverkid87 is offline
Find More Posts by hoverkid87
Mechanical Eng. Student
hoverkid87's Avatar
I had a great flyin day too! Flew the new BL Live Wire and my Radical Edge 540. I really like both of these airplanes!!
Old Apr 24, 2003, 12:39 PM
Bsouthwell is offline
Find More Posts by Bsouthwell
Registered User
Bsouthwell's Avatar
Wow that edge looks familiar!! How are you liking it? What did you put on it for your power system?

Regards
Bill
Old Apr 24, 2003, 12:56 PM
SC3 is offline
SC3
Find More Posts by SC3
SC3
Registered User

Just an observation...


Great looking planes but it looks like you need to shrink that Solite up some more on the wing. Just take your iron and set it to about 1.25 or 1.5 heat and run it from the TE to the LE (or vice versa) fairly slowly. Thank should take care of those nasty loose spots. Just make sure that you don't go against the edges of any other colors. So you want to make sure that you flow OFF of the top layer of Solite not onto it as you go across this wing. The reason - the added heat can cause the edges to slightly melt or pull up.

Great job though - I'm looking forward to a weekend of flying myself.

Keep flyin' it bruthas!
|<lint
Last edited by SC3; Apr 24, 2003 at 12:58 PM.
Old Apr 24, 2003, 02:17 PM
hoverkid87 is offline
Find More Posts by hoverkid87
Mechanical Eng. Student
hoverkid87's Avatar
Quote:
Originally posted by Bsouthwell
Wow that edge looks familiar!! How are you liking it? What did you put on it for your power system?

Regards
Bill

I LOVE it. I used a GWS300D with 12x6 prop. It hovers very nice.

Thanks
Addison
Old Apr 24, 2003, 05:57 PM
hoverkid87 is offline
Find More Posts by hoverkid87
Mechanical Eng. Student
hoverkid87's Avatar

Re: Just an observation...


Quote:
Originally posted by SC3
Great looking planes but it looks like you need to shrink that Solite up some more on the wing. Just take your iron and set it to about 1.25 or 1.5 heat and run it from the TE to the LE (or vice versa) fairly slowly. Thank should take care of those nasty loose spots. Just make sure that you don't go against the edges of any other colors. So you want to make sure that you flow OFF of the top layer of Solite not onto it as you go across this wing. The reason - the added heat can cause the edges to slightly melt or pull up.

Keep flyin' it bruthas!
|<lint
It's not solite, its the wattage plactic film that comes on the wings. You have to shrink it with a hair-dryer. The heat gun gets a little too hot. An iron would destroy the "covering material" that wattage uses.

Thanks
AK
Old Apr 24, 2003, 07:11 PM
aeropenguin is offline
Find More Posts by aeropenguin
Who Says Penguins Can't Fly?
aeropenguin's Avatar
Quote:
Originally posted by hoverkid87
I had a great flyin day too! Flew the new BL Live Wire and my Radical Edge 540. I really like both of these airplanes!!
Hello!
Sorry for my lack of knowledge on the subject, but which is which in your photo? Is it the one with covering that hovers well?
Where did you get the plans for the smaller profile one?

Thanx!
-aeroP
Old Apr 24, 2003, 07:35 PM
hoverkid87 is offline
Find More Posts by hoverkid87
Mechanical Eng. Student
hoverkid87's Avatar
Both hover well actually! The larger one is the Live Wire and the smaller one is the Radical RC Edge 540, it can be bought from www.radicalrc.com.

AK
Old Apr 24, 2003, 07:44 PM
aeropenguin is offline
Find More Posts by aeropenguin
Who Says Penguins Can't Fly?
aeropenguin's Avatar
great! Thanx! I was actually hoping that the edge wasn't a kit, but rather scratch built, because it looks like it can be done, completely, assuming all materials are on hand, in a DAY!

-aeroP


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanting the best of both worlds thebackroads Electric Warbirds 4 Nov 08, 2005 12:49 AM
Question Best of both worlds! PrasadL Scratchbuilt Indoor and Micro Models 13 Feb 18, 2005 12:18 AM
Question Trying to accomplish the best of both worlds Eye Sore Slope 5 Jul 11, 2003 05:18 PM
Best of both worlds.. Sparky Paul Foamies (Kits) 1 Mar 22, 2002 12:12 PM
The best of both worlds VWtechie Electric Plane Talk 1 Apr 23, 2001 04:59 PM