Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Sep 10, 2009, 05:04 PM
dumbthumbs53 is offline
Find More Posts by dumbthumbs53
Registered User
Has anyone that ordered it recieved their vinyl from ADC ? If so, how does it look?
Sign up now
to remove ads between posts
Old Sep 10, 2009, 05:09 PM
BoneDoc is offline
Find More Posts by BoneDoc
Team 3DHS
BoneDoc's Avatar
Rob at ADC does a great job!
Old Sep 10, 2009, 05:15 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
you goin to huckfest bonedoc?
Old Sep 10, 2009, 05:16 PM
BoneDoc is offline
Find More Posts by BoneDoc
Team 3DHS
BoneDoc's Avatar
I'm on call.
Old Sep 10, 2009, 05:59 PM
jadamian75 is offline
Find More Posts by jadamian75
Registered User
jadamian75's Avatar
Quote:
Originally Posted by DPHOYE
I agree I prefer Gorilla Glue. Should only be about an hour for the Gorrila Glue, but you do have to celan up any glue with alcohol as it expands.

David
David,

If you prefer gorilla glue and it's faster than I will use it instead of epoxy. After about 1/2 hour if it's not expanding anymore I should not have to check it correct? I would really love to have this plane done Saturday so I can build the 57" 330 Sunday. Hopefully tuesday I will maiden both.
Joe
Old Sep 10, 2009, 06:07 PM
jfv61 is offline
Find More Posts by jfv61
Go guerrilla
jfv61's Avatar
I use Elmer's Ultimate and maybe it's slower but I would leave it at least an hour (until it's good and hard). Here's how I test it: you will have several Q tips with PU on them that you cleaned up as it oozed out. When the Q tip is hard, then it's safe.

I'm not in David's league though, that's for sure...
Old Sep 10, 2009, 07:11 PM
jadamian75 is offline
Find More Posts by jadamian75
Registered User
jadamian75's Avatar
[QUOTE=jfv61]I use Elmer's Ultimate and maybe it's slower but I would leave it at least an hour (until it's good and hard). Here's how I test it: you will have several Q tips with PU on them that you cleaned up as it oozed out. When the Q tip is hard, then it's safe.


Good tip I do something similar with epoxy but did not think of saving some of the oozed out stuff on gorilla glue.
Old Sep 10, 2009, 07:13 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
Quote:
Originally Posted by BoneDoc
I'm on call.
thats right you wrote that the other evening...memorys not one of my strong points.
Old Sep 10, 2009, 07:17 PM
Daloaf is offline
Find More Posts by Daloaf
SkyHi Aerial
Daloaf's Avatar
I picked up some of the Pacer hinge glue at my LHS for $3, I'll give it a shot. It says you can handle the pieces in 30 minutes and dries fully in 2 hours. I like the idea that it doesn't foam up all over the place.

Matt
Old Sep 10, 2009, 07:33 PM
jfv61 is offline
Find More Posts by jfv61
Go guerrilla
jfv61's Avatar
I've never used the hinge glue and I agree PU can be messy but the foaming action makes sure you get a good solid connection on all sides (and makes it relatively light - lots of little air bubbles). For me, gravity tends to take epoxy away from the spots you wish it would cover/fill.
Old Sep 10, 2009, 07:57 PM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
I was trying to find the Pacer hinge glue, no LHS have it and someplace online I found it like Tower said it was discontinued. Then I ran into a guy who fly's GS stuff and he claimed the Pacer did not work well with Robart hinges (which I thougt it was pretty much made for). The guy said Pacer worked well on "flat" hinges and that he uses expoxy with the Robarts. I think I'll go with the PU.
Old Sep 10, 2009, 08:30 PM
M.Putnam is offline
Find More Posts by M.Putnam
Shade Tree Aviation #2
M.Putnam's Avatar
weaser42,

Tower is no longer carrying the Pacer hinge glue, but it is still available from other online sources and it is still listed on the Zap products website. Pacer hinge glue is designed for hinge point type hinges (there is even a picture of one on the bottle!). I have used it with great results on GS models in the past. You can't pull the hinges out without destroying the wood they are glued to! I like the fact that I don't have to watch for foaming and clean up is easy too. Pacer is just one of several options that will work, it just happens to be my favorite.

Matt
Old Sep 10, 2009, 09:50 PM
harrymc is offline
Find More Posts by harrymc
Just Happy To Be Here!!!
harrymc's Avatar
Well it was a good day!
My Blue Slick was sittin' on my porch when I got home. I've started the build tonight and I'm just so impressed by the quality of this aircraft. Just outstanding! This is my first 3DHS aircraft, and I can see why you guys are nuts over them! I'm not a fast builder but even so, I don't think it'll take me more than a week to complete this beauty.

Harry
Old Sep 10, 2009, 09:55 PM
BoneDoc is offline
Find More Posts by BoneDoc
Team 3DHS
BoneDoc's Avatar
Cool. I'm glad the pilot I suggested fit .
Old Sep 10, 2009, 10:28 PM
harrymc is offline
Find More Posts by harrymc
Just Happy To Be Here!!!
harrymc's Avatar
Yes it did Sir!
Thank you!
Now if you'll only stop by my house tomorrow and help me build it and then take it out to our club field and teach me to fly like you do, I'll be a happy, happy man!!!

Harry


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll 3D hobby shop 51" slick or 55" SHP? appleflyer 3D Flying 24 Mar 24, 2009 07:29 PM
Video 3D Hobby Shop's AJ Slick Clark Warfel Electric Plane Talk 3 May 08, 2008 08:31 AM