New Products Flash Sale
Thread Tools
Old Oct 04, 2009, 03:00 PM
Fliprob17 is offline
Find More Posts by Fliprob17
ADC Vinyl
Fliprob17's Avatar
Thanks.

That was going to be my last resort

I tried the "apc" inserts today, on the 10mm Xoar's, they are just a tad small and don't sit snug in the hub, slide right out the back of the prop., doesn't make me feel good. I've pretty much given up on finding the correctly drilled 18x10 Xoar, I think I will just get some 18x10E APC's first, then look at the 18x10 Turnigy later.
Sign up now
to remove ads between posts
Old Oct 04, 2009, 03:20 PM
simon737 is offline
Find More Posts by simon737
Triple boxed goodness!
simon737's Avatar
Got myself a driver now:-







Old Oct 04, 2009, 03:25 PM
Fliprob17 is offline
Find More Posts by Fliprob17
ADC Vinyl
Fliprob17's Avatar
....ok.... where'd you get that.....TOO COOL
Old Oct 04, 2009, 03:28 PM
simon737 is offline
Find More Posts by simon737
Triple boxed goodness!
simon737's Avatar
Thanks! The cockpit I made from scratch, the pilot is a hangar 9 30-33% size and was the 'all white' so put a base coat of blue and then hand painted the silver on, printed off some bulls and stuck to the front of helmet and just detailed a little red here and there. Job done....
Old Oct 04, 2009, 03:33 PM
refugeefromcalif is offline
Find More Posts by refugeefromcalif
May the Farce be with you...
refugeefromcalif's Avatar
Simon, Looking Good!
Nice work.

George
Old Oct 04, 2009, 03:36 PM
Fliprob17 is offline
Find More Posts by Fliprob17
ADC Vinyl
Fliprob17's Avatar
+1, really nice.
Old Oct 04, 2009, 03:42 PM
Tipover is offline
Find More Posts by Tipover
Registered User
+2 really nice.

Rob-

I've been able to put a ring or two of heat shrink tubing around those apc spacers on occasion to make them fit snug in props. You can even glue two spacers back to back if you want a deeper spacer.

Kevin
Old Oct 04, 2009, 06:16 PM
callen is offline
Find More Posts by callen
WAR EAGLE
callen's Avatar
Quote:
Originally Posted by papa38
Green, blue, red. in order of strength.Jeff
isn't it blue green or red?
Old Oct 04, 2009, 06:52 PM
sun.flyer is offline
Find More Posts by sun.flyer
Test your skills....fly IMAC!!
sun.flyer's Avatar
Very sharp looking Slick Simon.

Tim
Old Oct 04, 2009, 07:06 PM
jadamian75 is offline
Find More Posts by jadamian75
Registered User
jadamian75's Avatar
Simon,

Great job on the pilot.

Joe
Old Oct 04, 2009, 07:40 PM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
Quote:
Originally Posted by Fliprob17
Thanks.

That was going to be my last resort

I tried the "apc" inserts today, on the 10mm Xoar's, they are just a tad small and don't sit snug in the hub, slide right out the back of the prop., doesn't make me feel good. I've pretty much given up on finding the correctly drilled 18x10 Xoar, I think I will just get some 18x10E APC's first, then look at the 18x10 Turnigy later.

The masking tape deal worked quite well for the three flights I got in. Still have not made it to the hardware store to look for something more permanent. I ran into Mike from Hacker at a funfly in Surprise and he said he thought he recalled some company making an aluminum bushing but could not recall who.

Prop didn't get more testing as I jacked up my gear area I bounced hard on 1st landing of the day and I think came down hard on the left gear. My wheel pant took a hit and gelcoat is toast. Did not think too much about it as I'm used to the small planes which can take so much abuse, but on 3rd flight take off to vertical I saw something fall off the plane which turned out to be part of a former above the gear area. I have some work to do to get it shored up but the gear itself seems perfect.

The 18x10 did seem to give a bit more punch and the bird drew quite a bit of attention. I think at least a couple more folks will be looking at a 70" 3DHS in the near future.
Old Oct 04, 2009, 07:44 PM
Fig Jam is offline
Find More Posts by Fig Jam
I am UNIQUE!
Fig Jam's Avatar
Quote:
Originally Posted by weaser42
I ran into Mike from Hacker at a funfly in Surprise and he said he thought he recalled some company making an aluminum bushing but could not recall who.
I think Hyperion make the adapters.

Mike
Old Oct 04, 2009, 07:47 PM
rthorne is offline
Find More Posts by rthorne
Quit Chucking My Wood
rthorne's Avatar
Quote:
Originally Posted by Fig Jam
I think Hyperion make the adapters.

Mike
+1 on Hyperion. All E RC carries them http://www.allerc.com/index.php?cPath=36_61

Rich
Old Oct 04, 2009, 08:06 PM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
Thanks guys, looks like those Hyperion parts have an OD of 9.55mm which matches the APC props. Very close to 10mm but as Rob said when using the plastic APC ones there was a little wiggle room.
Old Oct 04, 2009, 08:11 PM
420flier is offline
Find More Posts by 420flier
Registered User
420flier's Avatar
Since I just went to 7S my 6S hyperion VX G3 6500 are up for grabs look in classifieds.

The Slick is amazing. Will we see a 104" or so? I would love to see one in that size.

I landed the 70 hard as hell today. Humbling. The Xoar lost about 2 inches off both blades. The plane looked like it jumped back off the runway. I added a bit of power and brough it in smooth after the bounce from heck. To my surprise the landing gear suffered almost no damage. There is some compressing of the wood at the left side gear right at the egde of the fuse. With a bit of epoxy and a push it will be back to perfect. I almost did not even see it except the covering had a minute wrinkle.

I think any other plane of mine would have lost the gear. I was schocked due to the posts I saw saying the gear box was broken due to a pancaking. I guess my huge bounce and prop sizing was not as hard. I am impressed with the strengh of this airframe.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll 3D hobby shop 51" slick or 55" SHP? appleflyer 3D Flying 24 Mar 24, 2009 07:29 PM
Video 3D Hobby Shop's AJ Slick Clark Warfel Electric Plane Talk 3 May 08, 2008 08:31 AM