New Products Flash Sale
Thread Tools
Old Aug 01, 2010, 10:16 PM
Brill 1 is offline
Find More Posts by Brill 1
Artillery! King of Battle!
Brill 1's Avatar

70" Maiden and Crash!


Finally got my 70" Slick in the air tonight! One click of aileron & elevator trim is the trimming that was required, it flew great! Maiden was pretty uneventful, but managed to get down kind of low and hover a little bit. I will post some video in the next 2-3 days...need to get it from the videographer!

Second Flight was was going great, getting down low; the Slick harriers great! Then I got a little over confident and stalled the Slick in a harrier, the wheel pants caught the grass and BAM! pulled the gear right out!

Damage is to formers 1-3, but the motor box is fine and the stringers are intact

Hopefully it is an easy fix!

Brian
Sign up now
to remove ads between posts
Old Aug 01, 2010, 10:49 PM
NumbSkull is offline
Find More Posts by NumbSkull
I used to be all thumbs...
NumbSkull's Avatar
Brian, sorry to see this!!! You were starting to get comfortable, and getting wild with it.

Don't worry.. I've fixed mine from worse... You'll have it back in the air in no time!!
Old Aug 01, 2010, 10:52 PM
Brill 1 is offline
Find More Posts by Brill 1
Artillery! King of Battle!
Brill 1's Avatar
Tyler is already working on the parts for me...love that 3DHS customer service!

After I peeled the covering back and could take a good look at the damage, I got kind of lucky, the stringers are intact! Now to buy the Acetone and start de-bonding!

Brian
Old Aug 01, 2010, 11:04 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
ouch sorry belrix,Ivestalled mine in harrier before too,and wore your shoes...twice.
it will fly much better if there is such a thing when you gt her back together..
kudos to you for your great attitude over it
Old Aug 01, 2010, 11:09 PM
Brill 1 is offline
Find More Posts by Brill 1
Artillery! King of Battle!
Brill 1's Avatar
I really loved the way the Slick flew...for the short 10 minutes I got to fly it tonight! My 57" SC has to watch out...I might have a new favorite plane!
Old Aug 02, 2010, 02:30 AM
marcwv is offline
Find More Posts by marcwv
Registered User

Some great photos of my slick!!!!!


Love my Slick!
Old Aug 03, 2010, 12:05 PM
Jeff_edge540 is offline
Find More Posts by Jeff_edge540
Mis-guided heli guy
Jeff_edge540's Avatar
Quote:
Originally Posted by 3D-Dabbler View Post
I did my 10S experiment on the 70" Slick on today.

The setup is a Scorpion 4035-250 on 10S with a 19x10 Turnigy Light Electric prop.

The same setup on 8S weighs 9lbs 6oz.

The lightest 10S setup (2650 mah 30C) is 9lbs 4 oz.
10s 3000mah 30C is 9lbs 9oz
The heaviest was 10S 4000 mah 20C at 9lbs 14oz.

Frankly, I couldn't feel the weight difference at all between all of the setups. It has boatloads of power ~2300 watts... plenty of control in hovers etc.... hits 70 - 75 mph and it seems to pull as hard when my timer tells me it is time to land as when I took off.

Putting it on 10S puts the motor into its sweet spot. It is getting around 86% efficiency.

It is a keeper.

Where are you finding 5S 2650 packs?
Old Aug 03, 2010, 12:12 PM
ibange is offline
Find More Posts by ibange
Bigger is better
ibange's Avatar
Quote:
Originally Posted by 3D-Dabbler View Post
I did my 10S experiment on the 70" Slick on today.

The setup is a Scorpion 4035-250 on 10S with a 19x10 Turnigy Light Electric prop.

The same setup on 8S weighs 9lbs 6oz.

The lightest 10S setup (2650 mah 30C) is 9lbs 4 oz.
10s 3000mah 30C is 9lbs 9oz
The heaviest was 10S 4000 mah 20C at 9lbs 14oz.

Frankly, I couldn't feel the weight difference at all between all of the setups. It has boatloads of power ~2300 watts... plenty of control in hovers etc.... hits 70 - 75 mph and it seems to pull as hard when my timer tells me it is time to land as when I took off.

Putting it on 10S puts the motor into its sweet spot. It is getting around 86% efficiency.

It is a keeper.
I like that review... I might be going that route with my 72SC so its good to hear that it works out pretty well. I already use 5S 3000's on my 55" shp so batteries are already provided for. Makes it an easy switch.
Old Aug 03, 2010, 12:33 PM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
Quote:
Originally Posted by Jeff_edge540 View Post
Where are you finding 5S 2650 packs?
Here's some.

http://www.hobbycity.com/hobbyking/s...0mAh_5S1P_40C_
Old Aug 03, 2010, 02:14 PM
3D-Dabbler is offline
Find More Posts by 3D-Dabbler
Just "hanging" Around
3D-Dabbler's Avatar
Quote:
Originally Posted by Jeff_edge540 View Post
Where are you finding 5S 2650 packs?
ZIPPY Flightmax 2650mAh 5S1P 40C
Old Aug 03, 2010, 02:19 PM
3D-Dabbler is offline
Find More Posts by 3D-Dabbler
Just "hanging" Around
3D-Dabbler's Avatar
Quote:
Originally Posted by ibange View Post
I like that review... I might be going that route with my 72SC so its good to hear that it works out pretty well. I already use 5S 3000's on my 55" shp so batteries are already provided for. Makes it an easy switch.
I like it enough that I am going to convert my second 70" Slick to 10S when I get enough money together to buy a second ICE HV 80.


I plan to play with other props too and see what happens. I plan to play with a APC-E 20x8 and a XOAR 20x10. I probably will not try an APC-E 20x10 because that pulls a lot more watts but I figure why not with the XOAR.


I ordered a Hacker A50-14L for my 72" Extra just for grins. I have a bunch of both 4S and 5S packs.
Old Aug 03, 2010, 03:24 PM
ibange is offline
Find More Posts by ibange
Bigger is better
ibange's Avatar
Oh... right. HV controllers. Well that does put a bit of a crimp in my style, forgot about that little requirement of 10S.
Old Aug 03, 2010, 03:38 PM
akschu is offline
Find More Posts by akschu
Registered User
akschu's Avatar
Quote:
Originally Posted by The Reaper View Post
hey scooter

just thought adding two more cells is uneeded weight when you can fly on 6s just fine.

Scott
I'm flying (2) TP 3900 prolite 4S batteries that weigh 725g which is lighter than most people using 6s hobby city batteries. My current draw is much less and the performance is excellent. Also, these batteries work in other planes which is nice.

schu
Old Aug 03, 2010, 03:42 PM
akschu is offline
Find More Posts by akschu
Registered User
akschu's Avatar
Brian,

Please post pictures of the repair as you go. I really want to see how you get it together since I've never really repaired anything that broke and I'm really curious about how you debond stuff.

schu
Old Aug 03, 2010, 03:53 PM
Brill 1 is offline
Find More Posts by Brill 1
Artillery! King of Battle!
Brill 1's Avatar
Quote:
Originally Posted by akschu View Post
Brian,

Please post pictures of the repair as you go. I really want to see how you get it together since I've never really repaired anything that broke and I'm really curious about how you debond stuff.

schu
WILCO

I should start removing the motorbox and broken formers tonight. Just bought a quart of Acetone! Had to sign a statement saying I wouldn't make meth with it!

Brian


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll 3D hobby shop 51" slick or 55" SHP? appleflyer 3D Flying 24 Mar 24, 2009 07:29 PM
Video 3D Hobby Shop's AJ Slick Clark Warfel Electric Plane Talk 3 May 08, 2008 08:31 AM