Thread Tools
Old Oct 22, 2012, 08:34 AM
losifanatic is offline
Find More Posts by losifanatic
Sippin the Koolaid!
losifanatic's Avatar
I get 6:5 mins out of my 8s 4k setup. Get 8mins out of the 5300s
Sign up now
to remove ads between posts
Old Oct 22, 2012, 09:01 AM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Question - when flying two 4s 4000 batts in a series you are effectively using an 8s 8000 right?
Old Oct 22, 2012, 09:15 AM
losifanatic is offline
Find More Posts by losifanatic
Sippin the Koolaid!
losifanatic's Avatar
No. It's still only 4k. In series you double voltage not mah. In parallel you double mah not voltage
Old Oct 22, 2012, 09:17 AM
tdab is offline
Find More Posts by tdab
t = Col Frank Fitts
tdab's Avatar
Quote:
Originally Posted by turnerm View Post
Question - when flying two 4s 4000 batts in a series you are effectively using an 8s 8000 right?
8s yes but still only 4000mahs....Series doubles the voltage mah's stays the same.

Parallel is the opposite...Doubles mah's and voltage stays the same. Tom
Old Oct 22, 2012, 09:21 AM
Capt. Roll is offline
Find More Posts by Capt. Roll
Registered User
Capt. Roll's Avatar
Quote:
Originally Posted by turnerm View Post
Question - when flying two 4s 4000 batts in a series you are effectively using an 8s 8000 right?
If you want 8S and 8000mAh you need four 4S/4000mAh packs hooked up in parallel and series.
Old Oct 22, 2012, 10:28 AM
robj is offline
Find More Posts by robj
Registered User
robj's Avatar
Quote:
Originally Posted by losifanatic View Post
No. It's still only 4k. In series you double voltage not mah. In parallel you double mah not voltage
I think someone posted the math a while back because of the voltage or something...you get a little more out of the 8s setup with a few variables tossed in. The post is out there somewhere.
Old Oct 22, 2012, 10:33 AM
joshet89 is offline
Find More Posts by joshet89
MD1 HACK
joshet89's Avatar
Quote:
Originally Posted by robj View Post
I think someone posted the math a while back because of the voltage or something...you get a little more out of the 8s setup with a few variables tossed in. The post is out there somewhere.
4000X8S=32000
5000x6S=30000
5300X6S=31800
Old Oct 22, 2012, 10:37 AM
robj is offline
Find More Posts by robj
Registered User
robj's Avatar
See!
Old Oct 22, 2012, 07:57 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by bss_rcg View Post
wow! I've 4 betteries in transit from HK. All 30C :-( guess I'd have to try them out and dependeing on how they perform I may order higher Cs. Using the setup I mentioned above, where does rudder servo fit? Tail or pull pull? Thanks Steve.
With a Hacker A60-6XS (same as you) and with my ESC and BEC under the motor box, to get the packs relatively close to center of the battery tray (though they are a bit back from center), I had to put my rudder servo in the back.

Now as to the "C" rating of the packs, I am more of a sport flier, and do fly a bit faster sometimes than guys doing more 3D, so for me, the higher "C" rating works best.... YMMV.....

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Oct 22, 2012, 08:40 PM
lugnutz is offline
Find More Posts by lugnutz
The Twisted Elf
lugnutz's Avatar
i am using 8s 4000 mah and 25c rated packs and getting 6-7 minute flights with no problems or heat,using GEN ACE batts motrofly 4325-280 motor,20x8 apc prop
Old Oct 22, 2012, 10:38 PM
sparkx38 is offline
Find More Posts by sparkx38
Livin ta fly
sparkx38's Avatar

Batteries


Anybody using the Turnigy Nano-tech batteries. I recently picked up a 71" slick set up with a Hacker A60-6XS. I bought a couple of Turnigy nano-tech 5000mah 6S 45~90C Lipo Packs and my first flight seemed like after the first punch it didn't have any more punch left. I took it easy on the second battery so I really cant say how it did. Anyone have any expierence with these batteries? I hope they stand up to the job.
Old Oct 22, 2012, 11:20 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Personally, I don't like Turnigy packs, every one I have had, had no power, and puffed. My 71" Slick has the same motor and has plenty of power through the whole flight...but I am using Thunder power packs...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Oct 22, 2012, 11:24 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by SteveT. View Post
Personally, I don't like Turnigy packs, every one I have had, had no power, and puffed. My 71" Slick has the same motor and has plenty of power through the whole flight...but I am using Thunder power packs...

SteveT
I've also experienced that with nanotechs. Not much punch to them.
Old Oct 22, 2012, 11:26 PM
Zimm98 is offline
Find More Posts by Zimm98
Registered User
Zimm98's Avatar
Around here we call them nanowrecks, but maybe you will have better luck than us.
Old Oct 22, 2012, 11:38 PM
Safety Hawk is offline
Find More Posts by Safety Hawk
Here We Go!
Safety Hawk's Avatar
Quote:
Originally Posted by losifanatic View Post
Close. I'm down in Elizabeth city off of route 17. I'm on the river.
Oh cool.......so you're actually closer to me now than you were when you lived in Grandy. I may have to come down there one day and take some pics.....if not maybe even try to to fly something.

Quote:
Originally Posted by Manta1 View Post
wow! Safety Hawk!! theres a name i havent seen in forever.. How goes it?
Hey, it's going good. What's Up?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll 3D hobby shop 51" slick or 55" SHP? appleflyer 3D Flying 24 Mar 24, 2009 07:29 PM
Video 3D Hobby Shop's AJ Slick Clark Warfel Electric Plane Talk 3 May 08, 2008 08:31 AM