3D Hobby Shop 71" AJ Slick - Build & Fly thread - Page 15 - RC Groups
Thread Tools
Sep 12, 2009, 02:54 PM
Go guerrilla
jfv61's Avatar
Some good comments, Craig.
Quote:
Originally Posted by cmala
This was one of the easiest building ARF's I've done...

...when I glued the elevator halves together, the gorrilla glue filled up the space where the control horn was supposed to go. I should have done the control horn first...
I had the same, a few seconds with a small drill bit cleared the slots for me. I'm afraid if you did the horn first you might get glue in the way of the joiner.

Quote:
Originally Posted by cmala
...One of the little wood eyes on the cowl that lines up with the forward pins of the canopy came loose but I left it off. The canopy alignment seemed to need a little tweaking to fit correctly...
I did tweak mine a little also (slightly tapered ends of pins and cleared holes a little). I think you might want to put the little wood piece back on there for strength.

Quote:
Originally Posted by cmala
...I thought that the carving of the servo arms so that they allow full movement of the ball joints was going to be a pain. It was not...
It was very easy with a dremel sanding wheel. I didn't do that on the prototype, makes me wonder if the ball end hitting the arm could have contributed to the servo arm screw loosening that caused it's demise. Regardless, I strongly suggest everyone do something to lock that screw in place, I'm going to try hot glue.

Quote:
Originally Posted by cmala
...This was my first 3DHS plane and if this thing flys as good as it went together, it won't be my last...
Welcome to the addiction!
Sign up now
to remove ads between posts
Sep 12, 2009, 03:02 PM
Ta-dah!
blakevan's Avatar
Quote:
Originally Posted by cmala
Thanks for running the pull-pull wires. That helped out a lot along with the strings in the wings for the aileron servos.

This size is much easier to work on especially inside the fuselage. you can actually get your hand in there to move wires around.

Thanks for including velcro, extra cable, engine mounting bolts, extra wing bolts, etc.

Craig
+1 No one can complain about how much pull/pull cable was included. I think I have enough left over for another 47" plane.

+2 The size makes it very easy to work with but the pucker factor for me was a little higher due to the cost of the airframe.

+3 I think I just re-filled my parts bin with what is left over from this build.
Sep 12, 2009, 03:04 PM
Lets Make a Deal
Hypersprint's Avatar
I love it when a new plane is released We always get a surge in 3DHS Owners Club Members

3DHS Owners Club Sign-Up Thread

Here is to a successful maiden for all

Rob
Sep 12, 2009, 03:14 PM
customstandoffs
cmala's Avatar
pucker factor ahead full

This one is gonna scare the out of me. I hope I can get comfortable with it. It's only money, right?
Sep 12, 2009, 03:51 PM
May the Farce be with you...
refugeefromcalif's Avatar
Quote:
Originally Posted by cmala
It's only money, right?
I've been told that, Money grows on trees...

Jorge
Sep 12, 2009, 03:56 PM
Ta-dah!
blakevan's Avatar
The airframe is a free roll for me so I am lucky that way. I think the saying is fly the biggest you can crash.
Sep 12, 2009, 03:58 PM
Brycycles@7000ft.
Got to work today and had a nice surprise. I just about forgot I had one ordered!?? Really no time to fly of late, so anyone want a plane??? Trade for your 69 Camaro, 86 RZ500, or a nice fast bass boat...by the way, I have been told this plane flies very well. Even a cave man can do it.
Sep 12, 2009, 04:05 PM
May the Farce be with you...
refugeefromcalif's Avatar
Quote:
Originally Posted by blakevan
I think the saying is fly the biggest you can crash.
That's why I had to Stop at the 87" SHP. (I'm on my 2nd one).

George
Sep 12, 2009, 04:27 PM
Lets Make a Deal
Hypersprint's Avatar
Quote:
Originally Posted by blakevan
The airframe is a free roll for me so I am lucky that way. I think the saying is fly the biggest you can crash.
I think the saying is "fly the biggest you can AFFORD to crash"
Sep 12, 2009, 05:31 PM
May the Farce be with you...
refugeefromcalif's Avatar
Quote:
Originally Posted by Hypersprint
I think the saying is "fly the biggest you can AFFORD to crash"
Sounds like about the same thing to me...
Biggest/Afford, Big planes cost, $$$.

Jorge
Sep 12, 2009, 05:38 PM
Ta-dah!
blakevan's Avatar
Quote:
Originally Posted by Hypersprint
I think the saying is "fly the biggest you can AFFORD to crash"
Yikes, I better sell all my planes because I can't afford to crash any of them.
Sep 12, 2009, 05:53 PM
Quit Chucking My Wood
rthorne's Avatar

Ready for a test flight


Mine is already to go. Just have to add the velcro for the battery. Nice easy build. Pic quality is so-so as I used my cell phone.

Rich
Sep 12, 2009, 07:44 PM
Registered User
ronrandle's Avatar
Well, I'm totally jealous of y'all. Mine was delivered yesterday while I was in at a tradeshow in Denver. Unfortunately, the triple boxing was no match for the journey and the fuselage was mashed pretty good in front of the rudder as well as a nice caved in part of the canopy. I'd post pics but I don't want to be the first to put up carnage it's too dang depressing. Will have to call Ben to find out next steps.

Beautiful looking plane though, makes it even worse having half of a beautiful plane in the garage.

Ron
Sep 12, 2009, 07:50 PM
I am UNIQUE!
Fig Jam's Avatar
Quote:
Originally Posted by ronrandle
Well, I'm totally jealous of y'all. Mine was delivered yesterday while I was in at a tradeshow in Denver. Unfortunately, the triple boxing was no match for the journey and the fuselage was mashed pretty good in front of the rudder as well as a nice caved in part of the canopy. I'd post pics but I don't want to be the first to put up carnage it's too dang depressing. Will have to call Ben to find out next steps.

Beautiful looking plane though, makes it even worse having half of a beautiful plane in the garage.

Ron
That sucks Ron, I'm sure Ben will take care of you. I hope mine makes it in safely, should be here Monday.

Mike
Sep 12, 2009, 07:53 PM
Ta-dah!
blakevan's Avatar
Ron that sucks! I hope you can get that worked out.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll 3D hobby shop 51" slick or 55" SHP? appleflyer 3D Flying 24 Mar 24, 2009 06:29 PM
Video 3D Hobby Shop's AJ Slick Clark Warfel Electric Plane Talk 3 May 08, 2008 07:31 AM