Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 09, 2009, 05:36 PM
RC Man is offline
Find More Posts by RC Man
A man with too many toys
Discussion

Futaba 8FG(S)


Does anyone have more detailed information about this radio? Tower Hobbies has very little information.

I have been looking for a Futaba thatís in-between the 7C and 10C and now it looks like it will be available. I do like the new 8-channel receiver design.

Anyone have a good reason not to order one. I have a $60 discount so I can get one for $389.99.


Last edited by RC Man; Jul 23, 2014 at 12:08 PM. Reason: 14SG announced
Sign up now
to remove ads between posts
Old Aug 09, 2009, 05:58 PM
DougV is online now
Find More Posts by DougV
Registered User
DougV's Avatar
Not much info on this unit yet, but here is what Robbe is showing.

Dimensions: 175 x 175 x 55 mm
Weight: 820 g
Frequency band: 2400.00
Channel spacing: 2048 kHz
Current drain: ca. 220 mA
Power Supply: 7,2 Volt NiMH-Akku
Functions: 20/10 Servos

It uses an SD card so the firmware can be updated at home.
10 channel radio (8+2)

Not much more than that.

Doug.

P.S. Check post #22 and 29 here: https://www.rcgroups.com/forums/show...1083285&page=2
Last edited by DougV; Aug 09, 2009 at 06:08 PM.
Old Aug 09, 2009, 07:01 PM
Greybird is online now
Find More Posts by Greybird
Registered User
Greybird's Avatar
I think as many heli's as you have, the 10CHG would be better. Have you scrolled throught the screens on one?
Old Aug 09, 2009, 07:09 PM
RC Man is offline
Find More Posts by RC Man
A man with too many toys
It does look like it has all the good features and helicopter programming at least as good as my old 9C 72Mhz radio. I have lots of PCM receivers that I fly with no problems so I donít want to convert it to 2.4.

I really like the SD card. I really donít know why all the radios donít have that feature.

I saw that (8+2) channel statement but I have no idea what the means. I assume that it comes their new 8-channel receiver.
http://www3.towerhobbies.com/cgi-bin...&I=LXWVF5&P=SM



Old Aug 09, 2009, 07:12 PM
Greybird is online now
Find More Posts by Greybird
Registered User
Greybird's Avatar
8 proportional and 2 on/off channels.
Old Aug 09, 2009, 07:14 PM
RC Man is offline
Find More Posts by RC Man
A man with too many toys
Quote:
Originally Posted by Greybird
I think as many heli's as you have, the 10CHG would be better. Have you scrolled throught the screens on one?
You canít have too many radios Ė LOL.

If I were going to spend the big bucks I would go with the 12-channel because of the better feel of the ball bearing sticks. If I could get the 12-channel without a receiver I would have purchased one a while back. I have no need for that huge receiver. I think we had this discussion about a year ago and I decided to build another helicopter instead.

You canít have too many helicopters either Ė LOL.

Old Aug 09, 2009, 07:20 PM
Greybird is online now
Find More Posts by Greybird
Registered User
Greybird's Avatar
The screens and menu's and graphics, are actually nicer on the 10C. Way easier to navigate than the 12 channel. That is why I got one. But, those ball bearings gimbals are great. Maybe they will make a 10C super that will have them....
Old Aug 09, 2009, 11:11 PM
MikeMayberry is offline
Find More Posts by MikeMayberry
Hitec/Multiplex USA
MikeMayberry's Avatar
Quote:
Originally Posted by RC Man
Anyone have a good reason not to order one. I have a $60 discount so I can get one for $389.99.


Sure... http://www3.towerhobbies.com/cgi-bin...?&I=LXXCZ5&P=7

Video walkthrough here:https://www.rcgroups.com/forums/show....php?t=1066681

Receivers are half the cost of Futaba plus a coupon for an additional 7Ch receiver for free with another for only $39.99 will be included with the radio. So for $469.98 you get the radio and three receivers.

Mike.
Last edited by MikeMayberry; Aug 09, 2009 at 11:18 PM.
Old Aug 10, 2009, 01:54 AM
Silent-AV8R is offline
Find More Posts by Silent-AV8R
Team Futaba
Silent-AV8R's Avatar
What an odd thing to do, stepping into a thread about a competitor's radio and posting links to your equipment.

I assume you would not mind Futaba/JR/Airtronics employees dropping into your threads and directing them to their radios.
Old Aug 10, 2009, 02:22 AM
MikeMayberry is offline
Find More Posts by MikeMayberry
Hitec/Multiplex USA
MikeMayberry's Avatar
As per the origional post... Anyone? I'm anyone. Have a good reason? I did,showing that a similar priced radio offers many more features and functionality as well as lower cost of outfitting models.

Mike.
Old Aug 10, 2009, 02:46 AM
JIMinKENTUCKY is offline
Find More Posts by JIMinKENTUCKY
I agree, very good reason.
The aurora looks like a good value for what you get.

James
Old Aug 10, 2009, 04:53 AM
FrogChief is offline
Find More Posts by FrogChief
Suspended Account
Quote:
Originally Posted by JIMinKENTUCKY
I agree, very good reason.
The aurora looks like a good value for what you get.

James

Agreed x2. That and the 8FG doesn't even have proportional sliders...
Old Aug 10, 2009, 05:26 AM
WimH is offline
Find More Posts by WimH
Registered User
WimH's Avatar
Quote:
Originally Posted by MikeMayberry
Sure..So for $469.98 you get the radio and three receivers.

Mike.
Interesting. To lure me in all they have to do is get rid of that external antenna cable and get Unilog downlink functionality...( bidirectional, ie programmong the Unilog from the TX) would be perfect!
Old Aug 10, 2009, 05:46 AM
skorp_jon is online now
Find More Posts by skorp_jon
Registered User
http://88.116.59.198/WebEdition/pdf/...T8FG_24GHz.pdf

Some specs...
Old Aug 10, 2009, 06:49 AM
RC Man is offline
Find More Posts by RC Man
A man with too many toys
Quote:
Originally Posted by FrogChief
Agreed x2. That and the 8FG doesn't even have proportional sliders...
I fly helicopters so I would never use those anyway. I just need a good solid 8-channel radio with top-of-the-line helicopter programming and ability to save programming on a SD card.





Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Focus 3 FM question. Also, about that new Futaba 3 ch. . . EFoil Parkflyers 5 Oct 19, 2001 12:59 PM
Wanted New Futaba T6XHS / Complete xios3 Aircraft - Electric - Airplanes (FS/W) 2 Aug 04, 2001 07:16 AM
4- New Futaba S-148 Servos $45 Shipped xios3 Aircraft - Electric - Airplanes (FS/W) 0 Aug 01, 2001 05:49 PM
New futaba 3 channel ss radio! carl schaller Electric Plane Talk 6 Jun 24, 2001 09:21 PM
New Futaba FF9 to replace FF8? John E Electric Plane Talk 5 Jun 10, 2001 06:41 AM