Thread Tools
Aug 05, 2009, 06:14 AM
Registered User
elan's Avatar

BeltCP V2 with stiff head...

Hey guys, I have a quick question. I am in the process of getting a Belt CP V2 in the air; as an aside, I am happily surprised with the model. Anyway, I noticed that the model came from the factory with a head somewhat on the stiff side. When you move the fly bar, it doesn't move as easily as I think it should. As regards a fix, any suggestions for usual suspects? From past experience with other models, once I get the model dialed-in I am just going to fly it and see if the head loosens up, if it doesn't then I'll look into it further.
Last edited by elan; Aug 05, 2009 at 07:01 AM. Reason: sp
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
FS Hornet with CP head logo10 Aircraft - Electric - Airplanes (FS/W) 0 Jul 07, 2002 10:37 AM
F/S Hornet built with CP head and servos logo10 Aircraft - Electric - Airplanes (FS/W) 0 May 21, 2002 12:40 AM
F/S New hornet built with CP head logo10 Aircraft - Electric - Airplanes (FS/W) 0 May 20, 2002 01:07 AM