46inch WS aerobatic (3D/patern/hybrid) FFF design - RC Groups
Thread Tools
Aug 03, 2009, 01:57 PM
Conformity Kill's

46inch WS aerobatic (3D/patern/hybrid) FFF design

I have been working on my 3D skills and like many I decided I would go the foam route for practice and save the balsa planes. well after a few go arounds I came up with something that works for me.

my requirements:

1. big enough to handle outside flying.
2. control surfaces and wing area big enough for stable flight but small enough to mimic "Real" models.

what started out as a 31inch yak54 design has been modded to a 46inch custom design. It has a 3inch longer fuse length 30% reduction in wing area and 25% overall reduction in tail surface area. Wing design is more tapered than a Yak or Extra and is more like a pattern plane. Rudder almost 50/50 in regards to area above and below the wing and the elevator design is also more tapered than most plane designs.

what that translates to is something that acts more like a balsa plane than a foamie. you will get wing rock at slow, slow speeds and you don't have giant control surfaces to help doing 3D moves. It rolls like a dart, has minimal tail lag and slightly couples to the gear when doing a knife edge. It may take a few more iterations to get it perfect but for now it gets way more flight time than anything I have.


2.3lbs - 2.4lbs
46.61 Wing span
43.25 overall length
.5 inch FFF (doubled up FFF sheets or you can use depron)
HS81's all the way around
12 X 6 or 13 x 3.8 APC
3S 2100 lipo 15C continuous 25C burst

it's not the lightest ship, but it flys for 6-7min

I post up the design in a full scale .PDF as well a packed up in a zip file with a .dxf file. as well as pics when I dump the camera.

Sign up now
to remove ads between posts
Aug 03, 2009, 03:25 PM
Registered User
triple_b's Avatar
Sounds interesting. Can't wait to see your pics and the plans.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Need help with FFF design- KE fix? Newberry 3D Flying 1 May 17, 2004 09:02 PM
What is the best aerobatic / 3D Park/Slow flyer FullScalePilot Parkflyers 44 Feb 03, 2004 11:26 AM
Cobra EPP Aerobatic 3D Anyone fly one? Capgun_Slim Parkflyers 15 Dec 24, 2003 06:30 PM
Built up 3mm depron aerobatic/3D??? bcripe1 Foamies (Kits) 4 Sep 03, 2003 09:00 PM
Best Aerobatic/3D plane for a speed 400 size brushless? squelchF18 Sport Planes 19 Sep 11, 2002 08:40 PM