New Products Flash Sale
Thread Tools
Old Jul 23, 2009, 12:45 PM
Jena67 is offline
Find More Posts by Jena67
AR Racing
Jena67's Avatar
New Product

1:5 race bike from AR Racing!

AR Racing will participate at the 1:5 RC Bike World Championship with
the new ARS race bike.

This bike was developed in cooperation with Hugo Binder from Germany.

Our new ARS bike ist the result of merging Hugos race proven frame
concept with the durability of AR Racing bike design.

Some of the features of this new bike concept are (in comparison to most
other known bikes):
- optimized battery position: following the 1:1 bike theory of the ideal
CG position and mass centralization
- higher CG for higher turn speeds at same lean angle
- weight balance: more weight on the front wheel
- longer swing arm matching the proportions of real bikes
- friction optimized drive train with main gear/sprocket unit
- light and flexible rear frame
- easy access to all components for quicker maintenance

The AR Racing Factory Team will participate at the worlds 2009 in
Leipzig with 4 pilots, in the superbike (3) and the stockbike (1) class.

In the attached pictures you can see the superbike model close to a pre production model 95% similar to the one we will sell.

We plan to start the first production batch after summer holidays.

Sign up now
to remove ads between posts
Old Jul 23, 2009, 02:16 PM
lee1980 is offline
Find More Posts by lee1980
Classic minis rock!!
Well cool antonio, looks good and very different to!

Hope it does well at worlds!

Old Jul 23, 2009, 05:58 PM
Dez82 is offline
Find More Posts by Dez82
Registered User
Dez82's Avatar
I first saw this at Nuremberg, looking forward to seeing it in action at the worlds, not long now!
Old Jul 24, 2009, 12:49 AM
reefhobby is offline
Find More Posts by reefhobby
Registered User
Very cool Antonio! Good luck at the Worlds!
Old Jul 24, 2009, 03:47 AM
Risknreward is offline
Find More Posts by Risknreward
Registered User
Risknreward's Avatar
Good Luck the bikes look sharp
Old Jul 24, 2009, 12:59 PM
JAM is offline
Find More Posts by JAM
MaxAmps CMO
JAM's Avatar
Very interesting for sure. I can't wait to see more on this. I like the use of a standard Li-Po pack. This will give users a wider variety of pack choices. We will be sure to add this to the website for packs that will work with it as soon as you have the full specs out.

Old Jul 24, 2009, 04:56 PM
dan duesentrieb is offline
Find More Posts by dan duesentrieb
Registered User
dan duesentrieb's Avatar

ARS pictures

here some more pictures of the new ARS bike. The plastic parts are rapid prototyping parts, later they will be injection moulded and black.
The new battery position makes the handling of the bike more responsive and more precise than you know from the usual bikes with low batteries.
Every driver at the worlds is invited to try it out after the competition.
Old Jul 24, 2009, 05:38 PM
Jena67 is offline
Find More Posts by Jena67
AR Racing
Jena67's Avatar
Here are some 3D drawings.

As you can see a peculiarity of this design is the possibility to remove the motor and the esc together unscrewing 4 M4 screws.

Really easy maintenance!

The swing arm shaft is directly fixed to the upper frame plate for maximal torsional rigidity.

The shaft itself isn't rotating to keep the rotating masses at the minimum.

More info later...
Old Jul 24, 2009, 05:41 PM
TroyM is offline
Find More Posts by TroyM
Registered User
TroyM's Avatar
do you have any problems with motor/esc overheating with the restricted airflow though the bike ?
Old Jul 24, 2009, 05:49 PM
Jena67 is offline
Find More Posts by Jena67
AR Racing
Jena67's Avatar
As you can see we have made the right lover frame plate in aluminum to dissipate motor heat, the ESC is in a perfect cooling position as long as you open a window in the front part of the body, right behind the front wheel

The airflow is really good.

No heating problem so far....

Old Jul 25, 2009, 05:08 AM
Torrance is offline
Find More Posts by Torrance
Registered User
Torrance's Avatar
the bike looks great. good luck during the worlds. i look forward to a great battle!
Old Jul 26, 2009, 05:07 AM
TT-Tom is offline
Find More Posts by TT-Tom
Registered User
TT-Tom's Avatar
Great job Hugo!!
I have seen the bike in action at our last training session and it is fast too!!
It will be a great battle in Leipzig!
Old Jul 26, 2009, 10:50 AM
BACKEMFNRG is offline
Find More Posts by BACKEMFNRG
Registered User
Fantastic. So many new bikes, its great to see. Good luck at the worlds!
Old Aug 04, 2009, 01:05 AM
dan duesentrieb is offline
Find More Posts by dan duesentrieb
Registered User
dan duesentrieb's Avatar

worlds result

The worlds have been lot of fun and we learned a lot in our first year of participation.
We are proud that we were able to make the 9th place in the superbike class, where AR-Racing pilot Thomas Kriener was the best german driver.

Thanks to all competitors for the fair races and the open minded exchange!

Hugo Binder
AR Racing Factory Team Manager
Old Aug 04, 2009, 11:42 AM
Chris Nicastro is offline
Find More Posts by Chris Nicastro
Registered User
Chris Nicastro's Avatar
Great job, its not easy to go to a big race with a new bike.

I was wondering why the bike has a long wheelbase from the side views in the photos?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 1:5-scale bike racing in Vegas, anyone? Guidoracer Motorcycles 14 Mar 20, 2009 02:35 AM
Molzer Mowery 1/5 Scale Bike ?? CRAZYNUT Motorcycles 17 Nov 10, 2005 12:43 PM
Modded 1/5 nitro bike with .21! mollycbr123 Motorcycles 18 Mar 08, 2005 09:21 PM
Nuova Faor 1:5 scale bike novaman Cars - Cars and Parts (FS/W) 15 May 16, 2004 09:51 PM
full home made 1/5 scale bike papo Motorcycles 1 Feb 17, 2004 07:58 PM