Loosing sync on a Turnigy SK Series 42-60 500Kv motor
I just received this motor (Turnigy SK Series 42-60 500Kv) and have been having some problems. At 3/4 throttle or above, I am getting terrible screeching and massive vibration from what appears to be a motor sync issue. Slowly bringing up the rpm's to this point, the motor/prop is butter smooth...hit about 3/4 throttle and the motor goes nuts.
CC HV45 ESC
8.75 x 10 prop
I have tried 3 different prop adaptors just to make sure it wasn't a balance issue. The cut-down prop I am using has been run up to 13,600rpm with a gearbox set-up, so I know the prop has no balance issues.
I also tried one of my cheapy Suppo 70amp ESC's and it didn't help/change the problem either.
I have tried every imaginable combination of timing and frequency with both speed controls. While the vibration/sync issue varies in it's intensity with changes in the timing, nothing seems to cure the problem.
Anyone have any ideas what I can try at this point?
"I have tried every imaginable combination of timing and frequency with both speed controls. While the vibration/sync issue varies in it's intensity with changes in the timing, nothing seems to cure the problem."
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Has anybody tried the Turnigy SK series motors?||IBCrazy||Electric Motor Design and Construction||38||Mar 22, 2009 10:48 PM|
|Sold||Turnigy SK series 35-36 910KV||brati4||Aircraft - Electric - Power Systems (FS/W)||3||Feb 07, 2009 12:59 AM|
|Discussion||Turnigy SK series motors||Skycruiser||Power Systems||7||Jan 16, 2009 04:23 PM|
|For Sale||Turnigy SK series 35-36 910KV||tarjas||Aircraft - Electric - Power Systems (FS/W)||1||Nov 12, 2008 11:00 AM|
|Discussion||New Turnigy SK series motors||hrvojekl||Power Systems||7||Jun 26, 2008 03:27 AM|