Z-RUN 60a ESC w/ 5.5t 6000kv motor. Severe Cogging! Please Help!
I have ordered the EZ-Run setup (60a/5.5t combo) and was in bliss with the kit in my Rustler. This was the most fun I have had in a very long time. My information is
Order Date: 06/11/2009
Order Number: yhst-62196343123315-4942
It seems that last week my kit has started to fail. I run 7.2 nicads. I used to have amazing speed/torque from the motor but after one particular run the motor has since made a strange cogging noise. It will not make this noise without a load but will once the wheels are on the ground. The motor now gets incredibility hot after driving from one side of the bedroom to another. ( This was just for testing, I don't run indoors) I have dissembled my transmission meticulously looking for broken teeth or bits but to no avail. I believe the issue is the motor, and not the speed control but I am not completely sure. Sometimes if it sits just right it will only make a click sound and wont even move.
I think I need to RMA the motor
what am i missing
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|FS: Bunch of props, GWS ICS-480 ESC w/heatsink, Speed 400 motor/gearbox||dawnron1||Aircraft - Electric - Airplanes (FS/W)||8||Apr 30, 2005 08:13 AM|
|FS: CC Fusion 35A ESC w/Krypton 14T brushed motor (from Corona)||sizam||Aircraft - Electric - Airplanes (FS/W)||0||Apr 29, 2004 04:18 PM|
|FS: Pixie 20 ESC w/ GWS 350C-C Motor||Shiba||Aircraft - Electric - Airplanes (FS/W)||5||Apr 08, 2004 08:15 PM|
|GWS 15 AMP ESC w/ Speed 400 6v motor||bruff||Aircraft - Electric - Airplanes (FS/W)||6||Jan 07, 2004 02:16 PM|
|WTB: 40A ESC w/brake for Brushed Motor||Mauilvr||Aircraft - Electric - Airplanes (FS/W)||2||Jan 29, 2003 11:45 PM|