Thread Tools
This thread is privately moderated by fly_boy99, who may elect to delete unwanted replies.
Jul 08, 2009, 04:46 PM
Flying motor mount master
fly_boy99's Avatar
Discussion

28-58-1 motor data


Folks

I thought I'd put all the data gathered by me for the 28-58-1 here as not to clutter up any threads with misc ramblings by some folks:

Noload 3S/4S and 3S results for these APC E props:

4.75x4.75
5x5
6x4 Sport
7x5

Cheers,
Bryan
Sign up now
to remove ads between posts
Jul 10, 2009, 12:55 PM
Flying motor mount master
fly_boy99's Avatar

28-58-1 motor data


How about 196mph pitch speed? How's that sound?



Motor test with 5S Flightmax 3000mah lipo on a 4.75x4.75 APC E prop.

Enjoy,
Bryan
Jul 10, 2009, 03:59 PM
The Kid
Thekid3418's Avatar
Holy abuse batman!!! THats absolutely insane! And im impressed with the batteries being able to hold 3.3V/cell at that kind of discharge current! I think that would get you to 200 mph pretty dang easily...

Any chance you could shoehorn it all into the Escape
Jul 10, 2009, 04:57 PM
DroneWorlds - TEAM NEW ZEALAND
jackosmeister's Avatar
Dang...
Jul 10, 2009, 05:17 PM
Registered User
Very close to the numbers I got on my Projeti (bench test only)

I used a Thunder power 5S 3300 mah...and 4.7 X 4.7 Graupner CAM speed with spinner.

Can't wait for my bungee to arrive....

also thinking whether I should put in an order for Thunder power 5S 3850 30C, rated for 115 amps continuous....
Jul 11, 2009, 12:20 AM
Flying motor mount master
fly_boy99's Avatar
Shoehorning it into an Escape might be a problem but possibly doable.




Quote:
Originally Posted by Thekid3418
Holy abuse batman!!! THats absolutely insane! And im impressed with the batteries being able to hold 3.3V/cell at that kind of discharge current! I think that would get you to 200 mph pretty dang easily...

Any chance you could shoehorn it all into the Escape
Jul 11, 2009, 06:18 PM
Flying motor mount master
fly_boy99's Avatar

28-58-1 motor data


This setup is in a 6904 HET fan and the rotor is properly balanced.

Two runs were made with low timing/high timing on a 5S Flightmax 3000mah lipo(interesting thing is the lipo held 3.6V per cell):



As you can see there was very little difference between the timing change so I set it back to normal.

B
Jul 19, 2009, 08:50 PM
Registered User
miche's Avatar
Nice data. If you try with 4.75x5.25 or 5.25x6.25 and 4S, please, let us know. Thanks
Miche
Last edited by miche; Jul 19, 2009 at 08:56 PM.
Aug 19, 2010, 09:06 AM
WCRC Skyhawks
BUMP

Any data for 4.75 x 5.5 on 4S available?

Thanks,
Chris
Last edited by Xelerator; Aug 19, 2010 at 09:55 AM.
Dec 25, 2010, 03:43 PM
Flying motor mount master
fly_boy99's Avatar
Wow didn't see this post.

It would be close to the 5x5 results albeit with a higher rpm number and higher amp draw. I could try and get some numbers up soon.


Quote:
Originally Posted by Xelerator View Post
BUMP

Any data for 4.75 x 5.5 on 4S available?

Thanks,
Chris

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Data What are the numbers on the Arc 28-58-1 on 6s??? lavochkin Electric Ducted Fan Jet Talk 3 May 30, 2009 10:46 PM
Sold ARC 28-58-1 Fan Motor NEW ----------- termite Aircraft - Electric - Jets (FS/W) 6 May 08, 2009 02:28 PM
Sold ARC 28-58-1 Brushless Fan Motor - NEW termite Aircraft - Electric - Power Systems (FS/W) 2 May 06, 2009 11:41 AM
Wanted Wanted ARC 28-47-1 motor. RCAV8R13 Aircraft - Electric - Power Systems (FS/W) 6 Jul 19, 2008 02:14 PM