New Products Flash Sale
Thread Tools
Old Jul 08, 2009, 09:02 AM
Dreamcatcher is offline
Find More Posts by Dreamcatcher
Warbirds Lover
Dreamcatcher's Avatar
Build Log

39.3" Funtana aerobatic plane - From scratch - Now with Plans


Hello !

A few weeks ago, I designed an electric powered mini-Funtana for a friend that was looking for a cheap, easy and fast to build aerobatic plane to replace his old "profile serie" Cap 232.

This is some spec. of my "baby" :

Span : 1 meter (about 39.3")
Length : 85.7 cm (34 ")
A.U.W : around 600 grammes (21.16 Oz)
Engine power : 222 W
Propeller : 10x4.7
Batterie : 1300 mAh LIPO 3S
Flight time : more than 10 minutes - performing "3D" flight

She have been maidened with success last sunday at late after noon.

Now i'm looking for a cool paint scheme for her.
I would like to paint a "Red Bull Air Race" scheme but i failed to find a complete exemple of such a paint scheme.

Does somebody have some pictures or links to complete schemes please ?
(i'm not sure of the words : i'm looking for some top / under & side view of a plane painted with a "Red Bull" paint scheme)

Thanks by advance

Pascal

EDIT :

As many of you asked for the plans....

This is the links :

The A0 sized untiled assembly plan is available HERE :

The A0 sized Untiled parts plan is available HERE


Keep me informed if you find some mistakes on the plans
and feel free to contact me if there is something you don't understand on them.

NEW UPDATE :

A4 Tiled version of Assembly plan is available HERE

A4 Tiled version of Parts plan is available HERE

Letter Tiled version of Assembly plan is available HERE

Letter Tiled version of Parts plan is available HERE


Last results for Center of gravity's location :

The best results we obteined seems to be with a ballancing point located at 8cm from the leading edge - Measured at the fuselage and wing junction.
At this ballancing point the aircraft is just a bit "Tail heavy".


New-Add-on :


A Kalleman's contribution : A plan to build a structure (with ribs and spars) wing for the Funtana

Thank you very much Kalleman

January 2013 update : Corrected plans (airfoils templates) - Thx a lot Ed !

V2 Letter Tiled version of Assembly plan is available HERE

V2 Letter Tiled version of Parts plan is available HERE


July 2013 update : Corrected plans (airfoils templates) - A0 tiled A4 version :


V2 A4 Tiled version of Parts plan is available HERE


How does she fly ? Lets watch a video made with the footages of the first flights


R/C Scratchbuilt mini Funtana - last test flights (4 min 1 sec)


Enjoy !
Last edited by Dreamcatcher; Jul 25, 2013 at 05:05 AM. Reason: update
Sign up now
to remove ads between posts
Old Jul 08, 2009, 01:19 PM
Horeb is offline
Find More Posts by Horeb
Registered User
Hello brother, my greetings from Cuba.

I like very much your plane, look very fun. I would like to build one.......

Bye.

Horeb
Old Jul 08, 2009, 01:21 PM
bass3587 is offline
Find More Posts by bass3587
Registered User
bass3587's Avatar
Plans????
Old Jul 08, 2009, 03:17 PM
starkec is offline
Find More Posts by starkec
Registered User
Plans please!!
Old Jul 09, 2009, 01:48 AM
kalleman is offline
Find More Posts by kalleman
Registered User
That's a great looking plane you have made!

Found some redbull paint schemes for you to look at. They differ some, so pick and choose the best for your plane.

Top view1
Top view2
Top view3
Top view4
Top view5

Side view1
Side view2

Underside view
Old Jul 09, 2009, 03:57 AM
Dreamcatcher is offline
Find More Posts by Dreamcatcher
Warbirds Lover
Dreamcatcher's Avatar
Hi !

I really like the Extra 300 Paint Scheme !
Something say me that we will try to reproduce this one

Thank you very much Kalleman.


Wow 3 people already ask for plan just after one day
You are faster than me guys !

At this time, as it was for me, the plan which I drew does not contain clearly all the necessary parts and is A0 sized - untiled.


I will draw them for you as fast as possible on a second layer and i will update the post with plans.

Are you Ok for a .PDF untiled A0 plan, or do you prefer a tiled version (A4 or letter ?)

Have a nice day !

Pascal
Old Jul 09, 2009, 04:06 AM
midrian is offline
Find More Posts by midrian
Registered User
A0 is fine we can split it later
Old Jul 09, 2009, 06:42 AM
denispeters is offline
Find More Posts by denispeters
Registered User
denispeters's Avatar
Great model!

A0 untiled is OK

Thank you in advance for sharing.

Keep on the good work.

cheers

Denis
Old Jul 09, 2009, 11:33 AM
Dreamcatcher is offline
Find More Posts by Dreamcatcher
Warbirds Lover
Dreamcatcher's Avatar
Ok for untiled A0 sized plans.

I'll take off to Duxford Flying Legend Air Show tomorrow early in the morning and will be back at home next Tuesday.
I'm affraid i will not have enough time to update my plans before to leave in England, sorry.

I think the plans will be available in the middle of the next week.
Old Jul 14, 2009, 04:26 AM
kalleman is offline
Find More Posts by kalleman
Registered User
Hi Pascal,

How was it at the Air Show?
What motor do you use in the plane?
Old Jul 14, 2009, 01:37 PM
finchkid24 is offline
Find More Posts by finchkid24
100% addicted to RC :)
finchkid24's Avatar
You need to plans up now! I have been waiting for a full fuse full wing 3D plane!!!
Old Jul 14, 2009, 01:53 PM
Dreamcatcher is offline
Find More Posts by Dreamcatcher
Warbirds Lover
Dreamcatcher's Avatar
Hi Kalleman !

The Duxford Flying Legend Airshow was simply FANTASTIC !
I've never seen so much WWII warbirds flying together :
8 spitfire + 6 P-51 + 1 FW-190 + 1 "buchon" (a spanish version of th e BF-109 fitted with the rolls royce engine in stade of the DB-605...) + 3 B-25 + 1 B-17 + 1 Lancaster + 3 Yak9 + 3 Hurricane + 1 Gladiator biplane + 2 Skyraider + Ms 406 + 2 Sea Fury + 1 Seafire + 1 Lysander + 1 Ju-52 + 1 DC-3 + many tiger moth + DH 89 Dragon Rapide and so much other flying jewels....

What a sound while the final "balbo" when all the aircrafts fly in a 3 squared box big formation !!!

It's really a "must to be seen" airshow.


Well.... it's time to back to our main subject :
I used a KDA 22-20L outrunner brushless engine.
It's a very good brushless engine with a low price.

Enjoy !
Last edited by Dreamcatcher; Jul 25, 2013 at 05:17 AM.
Old Jul 14, 2009, 01:57 PM
Dreamcatcher is offline
Find More Posts by Dreamcatcher
Warbirds Lover
Dreamcatcher's Avatar
Quote:
Originally Posted by finchkid24
You need to plans up now! I have been waiting for a full fuse full wing 3D plane!!!
Hey !

The plans are incoming.
I think to be able to post them tomorrow or at worst on thursday.
Sorry for the delay.

See you soon
Old Jul 14, 2009, 04:35 PM
E.RooD is offline
Find More Posts by E.RooD
Registered User
E.RooD's Avatar
amaizing plane i wanna build one
im building a su-26 full fuse that i found here
but why not to do the both jejejjeje
Old Jul 14, 2009, 04:45 PM
finchkid24 is offline
Find More Posts by finchkid24
100% addicted to RC :)
finchkid24's Avatar
Quote:
Originally Posted by Dreamcatcher
Hey !

The plans are incoming.
I think to be able to post them tomorrow or at worst on thursday.
Sorry for the delay.

See you soon
Awesome!! What thickness did you build the plane from? I plan on using Blu Core (5mm).


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Building a plane from scratch karpar The Builders Workshop 8 Dec 26, 2004 09:55 AM
Gonna build a plane from scratch! KingOfTheHill Slope 5 May 20, 2004 08:21 PM