Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jan 14, 2013, 12:06 PM
Jovanx is offline
Find More Posts by Jovanx
Tossing planes into the snow

Aileron differential


I'm sure some of you have tinkered with this and found the sweet spot. How far forward to you slant the servo arms to get the right amount of aileron differential? Which holes do you use on the arms and horns? Thanks.
Sign up now
to remove ads between posts
Old Feb 04, 2013, 12:11 AM
Dacono Air is offline
Find More Posts by Dacono Air
Certifiable
Dacono Air's Avatar
Crap! it's been a year since I posted here...Talk about neglect!...Time fly's! (pun?)...
Never messed with differential JX....still somewhat stock on my control setup...with my preffered expo's.
anyway...I put the NTM 3536 1800kv back in my mustang and i'll do my best to keep it out of the dirt this time
Stepped up to 4cell and a pricey Aeronuat props (7x7)...this is how she fly's...
WARNING: scale enthusiast's probably should not watch!...and man I look terrible on video..lol.
.......
BryansP51mustang (1 min 22 sec)
Old Feb 04, 2013, 12:29 AM
Cougar Zeke is offline
Find More Posts by Cougar Zeke
Ennnnncommmming!!!!!
Cougar Zeke's Avatar
Dacono- very nice. I take it that your wings are reinforced with carbon or fiberglassed???

That bad boy hauls the mail!
Old Feb 04, 2013, 01:06 AM
Jasong911 is offline
Find More Posts by Jasong911
Registered User
Wow Dacono, do you land it at 200kts on the hard surface too? Cool!

A buddy of mine just gifted (thanks David!) me his supertigre-equipped gunslinger and after flying it today for the first time and it being the fastest thing I ever thought I could fly, my respect for you speed demons has gone up another notch. I was so chicken, I even put a 6 channel in it to get spoileron programming. Two flights and I'm proud to say that it came home in one piece, even if I had to cheat to land it. Cool to have an almost windless day here on the Front Range.

What expo settings do you use?

--Jason
Old Feb 04, 2013, 01:06 AM
Hit N Run is offline
Find More Posts by Hit N Run
Fly it low.. and fly it fast!
Hit N Run's Avatar
What Cougar said
Old Feb 04, 2013, 11:49 AM
Dacono Air is offline
Find More Posts by Dacono Air
Certifiable
Dacono Air's Avatar
Quote:
Originally Posted by Cougar Zeke View Post
Dacono- very nice. I take it that your wings are reinforced with carbon or fiberglassed???

That bad boy hauls the mail!
No reinforcing yet! the only reinforcing added was to the horiz-stab, the mustangs weak link.
packing tape on wing leading edges to keep the dings minimal and create a smooth edge.


Quote:
Originally Posted by Jasong911 View Post
Wow Dacono, do you land it at 200kts on the hard surface too? Cool!

Cool to have an almost windless day here on the Front Range.

What expo settings do you use?

--Jason
26% expo on elevator(highrate) 12% (lowrate)
6% Ailerons(highrate) no expo on low rate
i am still dialing in the elevator settings...as you can imagine it's purty sensitive at speed.
Ditto on the weather!
...and the video was taken by my sis. Thank You Connie!....and if you fallow her Youtube link she did get my less than perfect landing on video, i skipped it a little hard.
Old Feb 04, 2013, 06:46 PM
bluecnc is online now
Find More Posts by bluecnc
Near-Earth object

My 2 cents


I always thought my BL was a little lacking in performance but I am a cheap skate. Well, the flight line fence forced me to purchase another motor last weekend. Darn plastic in HH motors.

Long story short. I put a Power Up 480 Zoom, 40 amp HURC ESC and an APC 9X6E prop(all from Headsup RC) on my Mustang. With a little finagling.

Whoa! I thought I was going to break the wings off. I was so used to flying at WOT that I kept forgetting to back off the throttle when I came diving in for a low pass past the spectators.

The stress was too much for me. Plus my flight time dropped to a little over five minutes. And the batteries looked like swollen pigs. I picked up some APC 9X4.5E at the LHS that I have yet to spin up. I hope that helps with my issues.

With some luck I will try the new setup again tomorrow. Nobody should be at the field so if I demolish the plane there won't be any witnesses.

I love this hobby but man it can go through some funds fast.

Fly fast and furious.

Rob
Old Feb 05, 2013, 12:24 AM
Jovanx is offline
Find More Posts by Jovanx
Tossing planes into the snow
Quote:
Originally Posted by bluecnc View Post
Long story short. I put a Power Up 480 Zoom, 40 amp HURC ESC and an APC 9X6E prop(all from Headsup RC) on my Mustang. With a little finagling.
I was awakened by the title of your post "My 2 cents", and was struck by this thought. Today is the day that Canada made the penny obsolete, and has told all businesses to round to the nearest nickel.

May I suggest a 9.5 x 7.5 prop more commonly known as a T28 prop. It is awesome with either the stock motor or the Power 10. The 9x6 pales in comparison.
Old Feb 05, 2013, 08:17 AM
bluecnc is online now
Find More Posts by bluecnc
Near-Earth object
Quote:
Originally Posted by Jovanx View Post
I was awakened by the title of your post "My 2 cents", and was struck by this thought. Today is the day that Canada made the penny obsolete, and has told all businesses to round to the nearest nickel.

May I suggest a 9.5 x 7.5 prop more commonly known as a T28 prop. It is awesome with either the stock motor or the Power 10. The 9x6 pales in comparison.
I picked up one of the T28 props also. My concern is the motor I am running now is a higher kv than the Power 10 and the 40 amp esc may not be able to handle the bigger prop the way I like to fly(WOT). Regardless, I will be giving the 9.5 x7.5 a try today also. Hehe. What is the worst that could happen?

Congratulations with abolishing the penny. Damn worthless piece of currency if you ask me.

Rob
Old Feb 06, 2013, 04:58 AM
dirdredd is offline
Find More Posts by dirdredd
Dir_D_Redd
dirdredd's Avatar
Where can I get a 4 blade nose cone
Old Feb 06, 2013, 12:09 PM
Bugbitten is offline
Find More Posts by Bugbitten
Registered User
Quote:
Originally Posted by dirdredd View Post
Where can I get a 4 blade nose cone
http://www.hobbyking.com/hobbyking/s...h_4_Blade.html
Old Feb 07, 2013, 05:13 PM
Willstonesracing is offline
Find More Posts by Willstonesracing
Using glue to fly high...R/C!
Willstonesracing's Avatar
Try the ME-109 three bladed prop with a 2200 MAH pack and have some fun....sure you will need a bigger ESC, my 35 amp one works well still...NO IFE's yet and no flames.

This thing really cooks.....for all you speed freaks out there. I am experimenting with Flaperons at the moment ,only one windy flight with them, so i am not sure how i like them yet. DX8 gives you wings!
Old Feb 13, 2013, 11:06 PM
reflective1 is offline
Find More Posts by reflective1
Registered User
reflective1's Avatar
Anyone purchased the air frame kit from PZ lately? I'm wondering if it comes bagged or boxed and, if bagged, what kind of shape it might arrive in. I would probably order it through my LHS to save shipping. Thinking about putting the guts of my 300 into the P-51.
Old Feb 13, 2013, 11:38 PM
Logan4169 is offline
Find More Posts by Logan4169
It is boxed with loving care, and shipping is free for orders over $99. One thing to note is that the servo tape that comes with the airframe only is white, but you can order the silver tape separately if you would rather not paint it.
Old Feb 13, 2013, 11:42 PM
Sammy70 is offline
Find More Posts by Sammy70
PSALM 14:1
Sammy70's Avatar
Make sure you order a motor mount as the airframe kit doesn't come with that...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Yippee! Official Parkzone P-51 Owner's Thread Part 2 Ferocious Franki Parkflyers 15 Apr 02, 2014 12:22 PM
Alert Parkzone P 51 Mustang peiviper Electric Plane Talk 35 Sep 14, 2009 01:48 AM
Official Parkzone P-51 Owners Thread monitor Parkflyers 913 Oct 04, 2005 10:02 PM
For Sale Parkzone P-51 Mustang argarre Aircraft - Electric - Airplanes (FS/W) 9 Sep 20, 2005 11:57 AM
Parkzone P-51 Mustang wattman Parkflyers 453 Feb 20, 2005 01:48 AM