NEW EDF from Phase 3: Squall!!!!exclamationpoint!!! - Page 303 - RC Groups
Thread Tools
Dec 21, 2011, 11:15 AM
Registered User
MRGTX's Avatar
Quote:
Originally Posted by ApexAero
http://www.hobbypeople.net/index.php...ne-covers.html
http://www.hobbypeople.net/index.php...et-squall.html
They're there, you just have to be patient and search dude!
No plastic canopy right now BTW.
Thanks but they actyally pulled the listing for the plastic parts so not much hope there.
Sign up now
to remove ads between posts
Dec 21, 2011, 03:42 PM
unbreakable ? give it to me !
kinghelichopter's Avatar
Quote:
Originally Posted by lowkeylaidback
Picked up a unit on Black friday, after reading more of this thread I see there were problems with the stock fan, is this still an issue, thanks.
a mate of mine flies the stock 4s version , im impressed with both the performance and the flight times , he gets almost a minute more than my het set up using the same batteries , so okl the hett is a little faster and vertical performance is better but the flight times suffer


dave
Jan 03, 2012, 10:15 AM
Registered User
choopi's Avatar
Quote:
Originally Posted by MRGTX
I am trying to find a shipping estimate to the United States of A...but they want me to register before I can even add it to my cart?




EDIT:
OK... made up a bunch of fake info so I could register...

Kit: $56 USD! Not bad..

EMS Shipping $53 USD. They're joking, right?
Are you serious?

... Yep you were serious! Outrageous!
Last edited by choopi; Jan 03, 2012 at 10:25 AM.
Jan 03, 2012, 12:26 PM
Electronics and RC
MegaTesla's Avatar
Quote:
Originally Posted by MRGTX
I am trying to find a shipping estimate to the United States of A...but they want me to register before I can even add it to my cart?




EDIT:
OK... made up a bunch of fake info so I could register...

Kit: $56 USD! Not bad..

EMS Shipping $53 USD. They're joking, right?

That is what it costs to send a big box across the globe with Express mail
Jan 04, 2012, 04:23 PM
Registered User
earlwb's Avatar
I haven't modified mine. It is a stock 3 cell lipo powered version, but I did get the vector thrust unit to stick on the back. It flies great. But with three cells if you get it into a high alpha slow speed mode, it doesn't have enough power to pull out of it. Thus if you are too close to the ground, you wind up making a controlled landing like that as you can't get the nose down to fly out of it. But it sure does a wicked buzz saw like effect for the roll rate. Too fast to count.


Jan 06, 2012, 07:50 AM
unbreakable ? give it to me !
kinghelichopter's Avatar
sorry its taken so long to get the photos of my scoop up apex but here they are ,i think there is around 150mm extra length on the scoop , its angled up to make a better skid for landings , the inlet is 100mmx 30mm wide
Jan 06, 2012, 08:34 AM
Aka: Tom Jenkins
ApexAero's Avatar
Yea man, the lower profile should give better aerodynamics! Did you run a thrust tube?
I'm jealous of your checkering ability!
Tom
Jan 06, 2012, 01:28 PM
Registered User

Squall


Since we're doing show and tell here, I thought I'd share some pictures of my nearly completed Squall. Stock set up but I decided to go a different route in the color. Blue paint is Cyrlon H2O and the graphics just vinyl. From what I've read the bottoms can get beat up so I added some plastic toward the front of the inlet and did some beefing up a bit inside but now enough to disrupt the airflow. I might end up putting a bit more on the bottom. Also thinking a using a control horn on the nose. Thoughts?
Jan 06, 2012, 03:00 PM
unbreakable ? give it to me !
kinghelichopter's Avatar
Quote:
Originally Posted by PaulDaniel
Since we're doing show and tell here, I thought I'd share some pictures of my nearly completed Squall. Stock set up but I decided to go a different route in the color. Blue paint is Cyrlon H2O and the graphics just vinyl. From what I've read the bottoms can get beat up so I added some plastic toward the front of the inlet and did some beefing up a bit inside but now enough to disrupt the airflow. I might end up putting a bit more on the bottom. Also thinking a using a control horn on the nose. Thoughts?
now that does look nice

the scoop tends to catch if your landing on grass , one of the guys at the club has a carbon rod that runs from the lip of the scoop to just behind the nose it acts a little like a skid it helps but not completely stops the scoop from digging in , if your running the 4s set up bring your cog a little forward than the book says . and be careful if there is little wind as they land fast ..lol...

dave
Last edited by kinghelichopter; Jan 06, 2012 at 03:20 PM.
Jan 06, 2012, 03:06 PM
unbreakable ? give it to me !
kinghelichopter's Avatar
apex , no thrust tube just yet , its on my list to do !

the checkers are done by a friend of mine , cut from vinyl



dave
Jan 06, 2012, 06:19 PM
Aka: Tom Jenkins
ApexAero's Avatar
On top, but you painted the bottom didn't you?

P.D. nice blue hue! If you're light weight its easy enough to swoop in at low speed then nose up and let the butt touch first with the throttle. Don't try to skid it in on grass or you'll go home in a few pieces. Me? I lay on a sheet of cling wrap then layup a couple layers of carbon cloth, let set, pop off and trim to shape with siczors and glue on with RTV to the bottom for a skid pad on black top. (most of the time)
Jan 08, 2012, 09:57 AM
unbreakable ? give it to me !
kinghelichopter's Avatar
i wish i could paint the checkers but the ones on the bottom are the vinyl ones , the top are made from plumbers aluminium tape


dave
Jan 09, 2012, 01:35 PM
Registered User
VT or not VT?
I just got a Squall on sale and I wonder If I should build it with the VT or without...a friend who had one one told that after installing the VT the plane
was way slower.....
Opinions?
Jan 09, 2012, 02:19 PM
chuck
do u want speed or aerobatics? is yours 4cell? imo tv is no good on the 3's version . and it does cut down thrust and speed.

chuck.
Jan 09, 2012, 02:22 PM
chuck
apex, what are u using for the resin in the c/f layup?

chuck.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Popular EDF Jets - Phase 3 Fantom - HobbyLobby - Firebird EZ-400 Foamy EDFs 127 Aug 02, 2012 08:47 AM
Sold EDF Unit from Phase 3 F16 $10 Shipped typhoonmaster Aircraft - Electric - Jets (FS/W) 1 Mar 15, 2009 01:27 PM
Discussion EDF vibration, Phase 3 EF-16 Friedclutch Foamy EDFs 5 Jul 16, 2008 10:23 PM
Discussion New EDF from BP hobbies Lance Nordby Electric Ducted Fan Jet Talk 3 Nov 11, 2006 07:38 PM
Alert New EDF From Great Planes netmechanic Electric Ducted Fan Jet Talk 5 Feb 19, 2006 04:23 PM