Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jun 21, 2009, 06:20 PM
frankg is offline
Find More Posts by frankg
Registered User
New Product

1952 Century Sea Maid '18' -1/6th scale


Well the St. Lawrence River Skiff is finished in the work shop so it’s time to clean up for the next project for Legend Model Boats, the 1952 Century Sea Maid ‘18’ built in 1/6th scale. This is the next boat in the series “Boats of the Antique Boat Museum of Clayton, NY., which we are now manufacturing. The model will be double planked, mahogany over hard balsa, and be completely laser cut. M.A.C.K. Products Precision Running Hardware will be included in the kit as with all Legend Model Boat kits, allowing the modeler to build the model as strictly static display model, or with the additional Power Package, radio controlled.

For those of you that have been saying , someone should bring back the STERLING MODELS, well we thought we would do you one better. We will be building all are models from the very start, designed for radio control, with the greatest attention to detail possible, to allow you the modeler to produce an award winning model of the subject.

To that end we are posting the two view drawing of the finished model, which will be included in the kit, for your viewing , and possibly wet your appetite for your next project.
Sign up now
to remove ads between posts
Old Jun 21, 2009, 06:46 PM
patmat2350 is offline
Find More Posts by patmat2350
RingTheBellsThatStillCanR ing
patmat2350's Avatar
Drool...
Old Jun 21, 2009, 07:03 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Quote:
Originally Posted by patmat2350
Drool...
Uh, Yeah!


36" is a big boat!
Old Jun 21, 2009, 08:04 PM
Kmot is offline
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Oh boy!! That looks suh-weeet!!!!
Old Jun 21, 2009, 08:13 PM
norgale is offline
Find More Posts by norgale
Retired for now
FrankG do you have any idea wht this kit will sell for including the running gear? This is a real beauty. Pete
Old Jun 21, 2009, 08:19 PM
charlie eaton is offline
Find More Posts by charlie eaton
Registered User
charlie eaton's Avatar
Well Rich, You've done it again!!
Old Jun 21, 2009, 08:32 PM
edmigley51146 is offline
Find More Posts by edmigley51146
Registered User
Rick, Are you taking orders in advance? If so I want to place an order. I'm building the Sterling Century Sea Maid again for the fourth time. Knowing your producing her in 1/6 scale I might just put my Sterling on the "To Be Completed in the Future" shelf.

Ed
Old Jun 21, 2009, 08:44 PM
frankg is offline
Find More Posts by frankg
Registered User
As of yet nothing is nailed down in that we have to do a proof build of the planes and then get the final cost of the laser cuts of the kit. The M.A.C.K. running hardware is already done, but the carvings for the deck hardware have to be finished , cast up and plated along with some stamping which we have to get pricing for. I would have to say that this kit should be some were in the $350.00 range.

By the way the model will be 35 inches in length with a beam of 12 1/2 inches. The 18’ Sea Maid was the next size down from what Sterling Models modeled which was the Sea Maid 20’. Believe it or not when you look at the two boats the only real way you can tell them apart other than measuring them is by the deck step pads. The 20’ had two per side centered in each cockpit, the 18’ had one step pad centered between the two cockpits.

Oh yea! The 18’ Sea Maid was faster than the 20’ with the Racing Fireball 160 with triple carbs and duel exhaust. This was the same motor that was used in the Century Thunderbolt.
Last edited by frankg; Jul 11, 2009 at 04:29 PM.
Old Jun 21, 2009, 10:26 PM
green-boat is offline
Find More Posts by green-boat
Boats on the brain!!
green-boat's Avatar
Sweeeeet...... now Barbie will have her dream boat.
Old Jun 21, 2009, 10:28 PM
norgale is offline
Find More Posts by norgale
Retired for now
Good show FrankG. You can put me down for one also. Pete
Old Jun 21, 2009, 10:33 PM
papower is offline
Find More Posts by papower
Registered User
papower's Avatar
That is one I will be buying for sure! Nice selection this time Rich.
Bruce.
Old Jun 22, 2009, 09:31 AM
norgale is offline
Find More Posts by norgale
Retired for now
I just printed out the PDF pic of the Sea Maid and whoever did that drawing did a masterful job. Really nice lines,very professional. Pete
Old Jun 22, 2009, 09:47 AM
woodybob is online now
Find More Posts by woodybob
WooHoo!
woodybob's Avatar
Nice...great choice for a new kit.
Old Jun 22, 2009, 11:34 AM
rcairboater is offline
Find More Posts by rcairboater
Registered User
What power are you using on this boat?
Gary
Old Jun 22, 2009, 06:05 PM
frankg is offline
Find More Posts by frankg
Registered User
The motor in the power package is the M.A.C.K. Model Marine Motor #5045. This is the back bone motor which we first developed when we first started manufacturing , some 37 years ago, and it is still going strong. This was one of our first very big investments in that we had the motors made to our specs for power and low amp draw.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question 54" Century Sea Maid 68Brick Scale Boats 19 Oct 21, 2016 02:42 PM
Pica 1/6th scale Mustang dumbthumbs Aircraft - Fuel - Airplanes (FS/W) 0 Dec 20, 2004 11:00 AM
WTB 1/6th scale P38 retracts airmcn_3 Aircraft - Fuel - Airplanes (FS/W) 0 Oct 26, 2004 10:56 AM
1/6th Scale Nitro Lotus with .21 Thunder Tiger biff_40 Cars - Cars and Parts (FS/W) 2 Jul 17, 2003 01:52 PM