Just another plane... - Page 16 - RC Groups
Thread Tools
Dec 27, 2009, 10:13 AM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by X30PILOT
Ah, 2s.
Sorry couldnít resist.
Seriously the Lander 4s setups are good for about 800 watts.
My 6s setup is over 1000 watts and less than 50 amps.

Iím getting a very aggressive flight for 5 minutes on 6s 3300s, and I am putting 2200 back in.

Dave
That's sweet! 5 min?!?! Man thats cool! I should have went with a 6, but I had tons of 4s laying around.
Sign up now
to remove ads between posts
Jan 14, 2010, 06:25 PM
Registered User
Guys, just building mine (love it so far), on a 6s set up what esc/motor/edf combo that I can get in the UK do you recommend please?

Cheers
Feb 24, 2010, 01:46 AM
Registered User
Got mine today. Got the LED Lights and the EDF, too (4S Setup). Very Excited.

Going to start building it soon. It is huge ;-)

Anyone thought about a cool Cockpit Upgrade?
Feb 24, 2010, 03:03 PM
Registered User
So, I am seriously looking into a cockpit upgrade.

The plane is scaled to 1:12 - what do you guys think? Will a 1:12 plastic cockpit fit? Or is that too large?
Feb 26, 2010, 04:22 PM
Registered User
I completed half of the plane last night. The Elevator really sucks. I mean it works but I think I have to redo the whole thing. It is really hard to push the elevator, any ideas?
Feb 26, 2010, 10:53 PM
Registered User
giddyuperic's Avatar
I had the same problem with the first one and it flew really bad because of them. So on the second one I went with sullivan Gold-n-rod control rod set Nylon type. It come with every thing for $7.28 from hobby people. Don't use the stock set up.
Feb 26, 2010, 11:27 PM
Registered User
I think I just going to do the mod with the two servos in the back. Don't really need the super scale look as long the surfaces are working 100% properly.

Only have the foam and the retracts build in. The rest are all my own electronics.
Feb 27, 2010, 12:10 AM
Registered User
X30PILOT's Avatar
I used the Sullivan Gold-n-rod and ball links on the control horns and my elevator is very precise and smooth.

X30
Mar 01, 2010, 12:04 PM
Registered User
I just ordered the Gold-N-Rod's. Seems to be the best solution.
Mar 03, 2010, 02:46 AM
Registered User
Can somebody help me here: https://www.rcgroups.com/forums/show....php?t=1200156 ?
Mar 07, 2010, 05:13 AM
Registered User
Finished my Hawker Hunter today. Tomorrow I will run some taxi tests. Its raining in SoCal at the moment, so I guess the take off have to wait a little bit.
Mar 10, 2010, 05:16 AM
Registered User
Well I finally go my Hunter finished and she's looking real pretty! Man! I'm the slowest builder in the world... but have a few questions for some of the "experts" on here. My plane must be tail heavy, cause my CG is right at around 190mm? !!! Doing research on here, I know that the 130mm in the manual is way too nose heavy, and I was trying to go for about 170-175 as that seems to be about the right CG for nice flying? I must have used too much epoxy on the tail? But my question is this: Has anyone flown their HH this tail heavy? Am I asking for trouble? I have a 4S 3300m batter pack in the front and have the rx and wire bundle as far forward as possible... I removed the cheater grate, and the flaps (lower halves) to reduce some weight, but short of taking off the wing tanks, I think that I may need to add a dedicated rx battery? I hate to add more weight, as she seems kinda porky as it is with all those servos to run retracts, etc... Also, am I right in taking the CG from where the wing meets the fuse? including the intake part? That works out to about where the front wing seam to fuse is? Help! I'm itching to fly;-)
Thanks...Z
Mar 13, 2010, 06:56 AM
Registered User

RCLander Hawk Hunter -Rainbow Color w/electric retract


Dear All,

The following video is our Hawk Hunter - Rainbow color w/ electric retract & gear doors system and lighting & afterburner system testing video for sharing with you.

RCLander Hawk Hunter Rainbow color with electric retract.wmv (1 min 49 sec)


She is powered by 6S 68mm 2399kv edf set with 3300mAh 25C battery and without cheater hole. Later I will post an update flying video of her.

Best regards,
Tim
Last edited by Tim Wan; Jul 26, 2011 at 02:54 AM.
Mar 13, 2010, 07:49 AM
AlouetteIII's Avatar
Quote:
Originally Posted by Tim Wan
6S 68mm 2399kv edf set with 3300mAh 25C battery and without cheater hole
Tim can you please tell us what modifications you have made to the Hunter ducting in order to achieve 'without cheater hole'. Any steps you took to streamline airflow or achieve laminar flow inside the ducting - Also interested to know the AUW & thrust in this configuration. Thanks
Mar 14, 2010, 06:21 PM
Registered User
comet68's Avatar
hi everybody, here a clip of maiden fly of my Hunter with 6 cells stock set up ..... very very nice plane, only 350mah per minute of fly .....
hunter.MOV (4 min 32 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Yippee! RWDRC Hawker Sea Fury Build Thread iflyprops Scale Kit/Scratch Built 424 Nov 08, 2017 12:54 PM
Cool New Mini FuntanaX from e-flite (official build thread/ flying thread!!) p51flyer 3D Flying 1741 Oct 30, 2016 04:41 PM
DC-9 Airliner for EDF-50BH - Official Build Thread Hawker Electric Ducted Fan Jet Talk 77 May 29, 2007 10:54 PM
Aerodrome RC Fokker D.VII - Pictorial build thread Admiral Piett14 Scale Kit/Scratch Built 11 Oct 17, 2005 01:59 PM
Hawker Hunter official list starting U812 Electric Ducted Fan Jet Talk 47 Aug 01, 2003 08:07 PM