Sep 13, 2012, 02:06 PM
3DHS 'native'
going4speed's Avatar
Best place to pick up the mintor motors?
Sign up now
to remove ads between posts
Sep 13, 2012, 02:09 PM
Well, now that you know ...
Bigster's Avatar
Quote:
Originally Posted by going4speed View Post
Best place to pick up the mintor motors?
Cradling very gently from the bottom?

Sorry.
Sep 13, 2012, 02:21 PM
MD1 HACK
joshet89's Avatar
http://www.topdawgaviation.com/ Mintors's can be found here
Sep 13, 2012, 02:23 PM
Registered User
skippy78's Avatar
Quote:
Originally Posted by going4speed View Post
Best place to pick up the mintor motors?
Topdawg or Chief aircraft.
Sep 13, 2012, 02:41 PM
Registered User
nebwake's Avatar
Got the 4325 mounted, still need to get all the servos in and get it wired up but hope to get her in the air tomorrow!
Sep 13, 2012, 02:43 PM
Registered User
nebwake's Avatar
For those of you running 8s with 2 4000mah batts wha flight times are you getting? I am running a motrolfly 4325-310 and a vess 17x6 for now until my 18x8's get here
Sep 13, 2012, 03:18 PM
Registered User
hosam's Avatar
for those of you that have ordered a MB kit for the velox, does the motor extension box for electric motors come with the MB kit?
Sep 13, 2012, 03:28 PM
Aerobatic Fanatic
HugoCraft's Avatar
Steve T,

I ordered some 5x100mm bolts from Fastnal and they should be in tomorrow for me to pick up!

I'll post pics after its all mounted up.
Sep 13, 2012, 04:23 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by hugocraft View Post
Steve T,

I ordered some 5x100mm bolts from Fastnal and they should be in tomorrow for me to pick up!

I'll post pics after its all mounted up.
Hotay.....With the 100mm, you will probably end up having to stack some washers under the head to keep from bottoming out on the shank portion of the bolt. I had the four for my mount and I compared them, and saw at that length this would be necessary.. I don't know why they jump from 80mm to 100mm.....too darn big of a jump!!

Edit!! Just found some 90mm long at Mr. Metric (which is only about five miles from my home).... scroll to the bottom of the page.... . If you decide you want them, let me know and I'll go get some!!

SteveT
Last edited by SteveT.; Sep 13, 2012 at 04:36 PM.
Sep 13, 2012, 04:37 PM
3DHS 'native'
going4speed's Avatar
Awesome!

Quote:
Originally Posted by Bigster View Post
Cradling very gently from the bottom?

Sorry.
Sep 13, 2012, 07:45 PM
OOPS
Manta1's Avatar
Quote:
Originally Posted by nebwake View Post
For those of you running 8s with 2 4000mah batts wha flight times are you getting? I am running a motrolfly 4325-310 and a vess 17x6 for now until my 18x8's get here
7 minutes timer goes beep
Sep 13, 2012, 07:47 PM
Aerobatic Fanatic
HugoCraft's Avatar
Quote:
Originally Posted by SteveT. View Post
Hotay.....With the 100mm, you will probably end up having to stack some washers under the head to keep from bottoming out on the shank portion of the bolt. I had the four for my mount and I compared them, and saw at that length this would be necessary.. I don't know why they jump from 80mm to 100mm.....too darn big of a jump!!

Edit!! Just found some 90mm long at Mr. Metric (which is only about five miles from my home).... scroll to the bottom of the page.... . If you decide you want them, let me know and I'll go get some!!

SteveT
I'll pick up the 100mm ones tomorrow and order some of the 90mm ones while I'm there.
Sep 13, 2012, 08:08 PM
Sippin the Koolaid!
losifanatic's Avatar
4325 showed up today. Looks like I get to maiden this weekend if my brother doesn't have to work
Sep 13, 2012, 09:53 PM
OOPS
Manta1's Avatar
Quote:
Originally Posted by losifanatic View Post
4325 showed up today. Looks like I get to maiden this weekend if my brother doesn't have to work
awesome! were having a get together at RAA this weekend starting tomorrow Losi..road trip!!! come on down if yur not doing anything. Im hoping to get some flights on my slicks and msx and vyper!
Sep 14, 2012, 04:55 PM
Registered User
nebwake's Avatar
I'm sure its in here but im lazy... What size servo arms are needed on the 4 surfaces? im running a push/pull rudder, thanks in advance for keeping me lazy!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product 3D Hobby Shop Velox Revolution 47" 800mZero 3D Flying 8497 Dec 19, 2011 10:48 AM
Discussion 25 Flights: 3D Hobby Shop Velox Revolution Doc Austin 3D Flying 45 Apr 21, 2008 09:19 AM
Video 3D Hobby Shop 47" Velox: On 3S sun.flyer Electric Plane Talk 4 Dec 07, 2007 10:13 PM
Video 3D Hobby Shop 47" Velox: sun.flyer Electric Plane Talk 3 Dec 07, 2007 01:23 PM