Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old May 30, 2009, 11:21 PM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
Discussion

Another FPV Funjet


I've made serval major crash/repair on my first funjet so I decided to start with a new one.

He will still have the same setup :
-35A Atlas Black ESC
-Axi Gold 2212-12 1950kv with a 6x6 Cam Speed prop ( yeah, i'm 0.5 over )
-Futaba FASST 7ch receiver
-900Mhz 500mW Video Tx
- RCV922 Camera powered by a LM7805 linear V reg

I was able to go vertical and reach 120km/h, so this is fine for me.

Here's some pics :




As you can see, the outrunner is outside because of is low weight and, i've removed the small thing that was holding the shaft, so i dont break prop that way, that work well.

And here is the part for what i'm proud



The cam is holded with 3 magnets, so she is easy removable.

And, I will make a small "glass" in fron of the cam, so flight over clouds and fog will not affect visibility.

I will use 2200mAh 25C 3S Zippy

When I will make my first flight with this one, i will put my OSD in it .
Sign up now
to remove ads between posts
Old May 30, 2009, 11:29 PM
Hauntme13 is offline
Find More Posts by Hauntme13
Registered User
That's cool! Nice and clean. Can't wait for video.
Old May 30, 2009, 11:42 PM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
I can't wait too, but I will receive my lipo monday
Old May 31, 2009, 01:24 AM
galaxiex is offline
Find More Posts by galaxiex
my karma ranover my dogma
galaxiex's Avatar
Looks great!

Do you not worry that the Video Tx will get too hot inside the foam?
Old May 31, 2009, 01:27 AM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
He was sitting on my desk, with no airflow for 45 minutes without anyproblem. So..i dont think it will be a probleme with an airflow
Old Jun 13, 2009, 05:08 PM
Kmart is offline
Find More Posts by Kmart
Registered User
Kmart's Avatar
Looks awesome! Really clean. I might have to do this with my funjet. I'm running
Eflite Six Series speed 400 sized 2000kV
6x4 prop
Castle Creations Thunderbird 54 ESC
Castle Creations BEC at 6v
ar5000
Hitec HS65HB karbonite servos
3s 2200mah battery. Also using a 4s, but I am downprop-ing? to keep amps down.

Do you have a link to where you got the camera setup? This would be my first FPV plane, so I'm trying to figure out what I need to get.
Old Jun 13, 2009, 10:39 PM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
http://www.nghobbies.com/cart/

Camera
http://www.nghobbies.com/cart/index....roducts_id=132

video tx
http://www.nghobbies.com/cart/index....roducts_id=259

the video of my setup will come this week
Old Jul 29, 2009, 09:17 AM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
here is a video
Funjet vs Rafale FPV! (6 min 6 sec)
Old Jul 29, 2009, 09:38 AM
Steve91t is offline
Find More Posts by Steve91t
Registered User
I'm glad someone is doing FPV with a fast plane! Everyone puts them on easy stars. Fun to watch!
Old Jul 29, 2009, 09:44 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Quote:
Originally Posted by JohnyGab
here is a video
http://vimeo.com/5812357
What happen at the end?
Did the magnets break away or something?

Very cool video tho! I need to get my funjet in the air too!

Max
Old Jul 29, 2009, 10:34 AM
aaron_gx is offline
Find More Posts by aaron_gx
Flying FPV from the lab.
aaron_gx's Avatar
wow johnnygab, that was a good vid... The ending was unbeleivable... Im amazed you got a good shot of the plane flying away from the canopy, thats a great still shot.

Did it survive? Looked like the plane flew very well.
Old Jul 29, 2009, 10:59 AM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
the plane fly amazing!
Everybody told me that a axi gold 2212-12 is not enought power for a funjet.

Bs, unlimited climb!

The probleme with motor on hobbycity is that they are not efficient!

I dont really understand the crash because the plane was going almost straight down, at full throttle, so a speed of maybe 175km/h ( i can go up to 130km/h without going down )....+ the wind of 30km/h, thant might be a relative wind to the plane of 200km/h+++, the canopy simply came of, and...fall with the batery, finish at 10feet in a three.

the plane finish is "landing" 30 seconds later, 75 meters for the canopy in a crapy wood.

It took me and josso about 3.5h to find it, plenty of blood on our legs because of the raspberry plantation !!!

Thanks again to him!

The plane is in perfect shape, all magnet are still there! ( 8mmx2mm strong magnet x 4 ).

the only thing we didnt found is the motor cage, that is removable....anyway, i will buy the same motor again!
Old Jul 29, 2009, 11:26 AM
BlueAngel2000 is offline
Find More Posts by BlueAngel2000
Flying like an Angel.
BlueAngel2000's Avatar
lol
nice flight.

we need a slow mow of the "eject of the pilot"
Old Jul 29, 2009, 01:05 PM
JohnyGab is offline
Find More Posts by JohnyGab
Registered User
there is only ONE frame in the video of the ejection !, and thats also the last time i saw my power cable extension ( male and female deans at both end ). lol.

I just command a new axi gold 2212-12, its done now!
Old Jul 29, 2009, 02:17 PM
ssgtakeo is offline
Find More Posts by ssgtakeo
Registered User
Quote:
Originally Posted by JohnyGab
here is a video
http://vimeo.com/5812357
Too bad you're not closer Johny, we could use a third pilot for some formation work:

Flying RC jets in close formation! FPV EF-16/ F-5 (5 min 8 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Planning an FPV funjet Hauntme13 FPV Talk 204 Apr 23, 2010 06:20 PM
Discussion First Flight with my fpv funjet JohnyGab FPV Talk 7 Jan 13, 2009 06:14 AM
Discussion Another FPV argument thread typicalaimster FPV Talk 61 Aug 29, 2008 02:37 PM
Discussion Another FPV store VRflyer FPV Talk 1 Jan 13, 2008 10:14 AM
Discussion Another FPV Flight @ Construction Zone hihptsi Aerial Photography 0 Nov 26, 2006 10:45 PM