Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 09, 2013, 02:42 PM
EPP Destroyer is offline
Find More Posts by EPP Destroyer
Registered User
Thanks for all the input. I resisted the urge to get one of each , and have a Roswell 1 on the way. Now I'm off to visit HobbyKing.com.....
Last edited by EPP Destroyer; Mar 09, 2013 at 02:57 PM.
Sign up now
to remove ads between posts
Old Mar 09, 2013, 03:29 PM
skyhawk newbie is offline
Find More Posts by skyhawk newbie
Not a newbie anymore..
skyhawk newbie's Avatar
Quote:
Originally Posted by EPP Destroyer View Post
Now I'm off to visit HobbyKing.com.....
I was there and bought this set up for my Assassin which is in the mail .

Turnigy nano-tech 1300mAh 3S 45~90C Lipo .
Turnigy TGY-9018MG Metal Gear Servos 2.5kg/13g/0.10
Turnigy D2826-6 2200kv Outrunner Motor .
H-KING 50A Fixed Wing Brushless Speed Controller .
will be spinning a APC 6x4 prop.

Sean
Last edited by skyhawk newbie; Mar 09, 2013 at 06:06 PM.
Old Mar 09, 2013, 06:10 PM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by skyhawk newbie View Post
I was there and bought this set up for my Assassin which is in the mail .

Turnigy nano-tech 1300mAh 3S 45~90C Lipo .
Turnigy TGY-9018MG Metal Gear Servos 2.5kg/13g/0.10
Turnigy D2826-6 2200kv Outrunner Motor .
H-KING 50A Fixed Wing Brushless Speed Controller .
will be spinning a APC 6x4 prop.

Sean
Thats going to be a fast assassin!
Old Mar 09, 2013, 06:33 PM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
My Widowmaker build is almost done! might get to maiden tomorrow! BTW to whoever hasn't built a Widowmaker, but has built an assassin, you don't have near the room to bury your electronics as you do in the assassin!
Old Mar 09, 2013, 06:51 PM
michaelingp is offline
Find More Posts by michaelingp
Registered User
Quote:
Originally Posted by tupeloflyer View Post
Thats going to be a fast assassin!
And very short flight time, I think.
Old Mar 09, 2013, 07:32 PM
elCapitan is offline
Find More Posts by elCapitan
wheeeeee!
elCapitan's Avatar
Quote:
Originally Posted by Kydave View Post
Hey Lee
I just got an assassin yesterday and haven't read all the posts here. That being said has anyone put colored packing tape down on the foam and then ironed the included clear covering over it and does it work ok?
packing tape under the lam, over the lam... either way should work just fine. Most people seem to do it after the lam, but not for any specific reason I've heard. Probably just easier to finish the build entirely (including lam) and then do your design when it's all done.
Old Mar 09, 2013, 10:03 PM
Lee is offline
Lee
Find More Posts by Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
Quote:
Originally Posted by elCapitan View Post
packing tape under the lam, over the lam... either way should work just fine. Most people seem to do it after the lam, but not for any specific reason I've heard. Probably just easier to finish the build entirely (including lam) and then do your design when it's all done.
The packing tape won't stick to the foam but it sticks well to the laminate that sticks to the foam. I use the packing tape on the outside of the laminate.

Lee
Old Mar 10, 2013, 06:32 AM
skyhawk newbie is offline
Find More Posts by skyhawk newbie
Not a newbie anymore..
skyhawk newbie's Avatar
Quote:
Originally Posted by tupeloflyer View Post
Thats going to be a fast assassin!
Should get around 260watts..

Sean
Old Mar 10, 2013, 08:27 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by michaelingp View Post
And very short flight time, I think.
He did chose a high C rated lipo I see.... will help some.
Old Mar 10, 2013, 10:19 AM
CaribbeanBlue is offline
Find More Posts by CaribbeanBlue
Registered User

Foam wingtips on WM


Here is photo of my 13Oz WM variant with foam recurved wingtips and a 11Oz Scythe

Video to follow when trade winds calms down~~~~H
Last edited by CaribbeanBlue; Mar 10, 2013 at 10:27 AM. Reason: Add photo
Old Mar 10, 2013, 11:04 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Widowmaker done! RTF. Got a question for a more experienced CTH wing builder & flyer. Look at the 2nd & 3rd photo's, look at my setup placement. is it normal to have to add 1 1/2 oz's of lead to nose to get it to balance at 6.5" mark?
Old Mar 10, 2013, 11:05 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by CaribbeanBlue View Post
Here is photo of my 13Oz WM variant with foam recurved wingtips and a 11Oz Scythe

Video to follow when trade winds calms down~~~~H
Nice looking Wing's! wind is my problem today also
Old Mar 10, 2013, 11:17 AM
Bluhammer is offline
Find More Posts by Bluhammer
Bay Area Prop Buster
Bluhammer's Avatar
Tupelo, very nice build! That's weird that it needs so much extra weight.
Old Mar 10, 2013, 12:18 PM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by Bluhammer View Post
Tupelo, very nice build! That's weird that it needs so much extra weight.
Thanks Bluhammer! I just dropped a little tail weight by cutting off some long motor mount screws, and was able to remove 1 of the 1/4oz weights? I just weighed it(widowmaker) and it weighs 17.5oz's, thats with pack on board. had to add weight to the nose of the Assassin also? it a little on the heavy side weighing 18.4oz's with battery. but after trimming and a few flights now, it flys like a dream! was going to maiden the WM today but the wind decided to gust to 25 to 30 today
Old Mar 10, 2013, 12:27 PM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by CaribbeanBlue View Post
Here is photo of my 13Oz WM variant with foam recurved wingtips and a 11Oz Scythe

Video to follow when trade winds calms down~~~~H
I would almost send you a female XT60 connector for free on that ESC on the Scythe! That would scare me! because I would cross polarity one day for sure with the bullet connectors!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Qjet Flamingo & Butterfly: A plane no one has!! romans1015 Parkflyers 3 Sep 04, 2016 06:47 PM
WALLY WING...no fins...flies great!!! gpw Foamies (Kits) 32 Aug 31, 2016 09:21 AM
Qjet Flamingo & Butterfly: A plane no one has!! romans1015 Parkflyers 6 Jan 29, 2004 05:05 PM
Noob concept plane Mikey C. Foamies (Kits) 5 Nov 11, 2003 02:05 PM
It's a boat...It's a plane...no! It's flightship! MrBungle Electric Plane Talk 24 Jun 26, 2001 02:55 AM