Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 08, 2013, 03:51 PM
viper522 is offline
Find More Posts by viper522
Registered User
Quote:
Originally Posted by Chris Avllino View Post
Have an assassin that someone gave me and can bind it on my dx7, use delta configuration, but can't get the right setup. I guess my question is, can anyone walk me through a dx7 setup? I'm wondering if I have to reverse the servos...
Might be time to patronize your LHS
Sign up now
to remove ads between posts
Old Feb 08, 2013, 04:35 PM
michaelingp is offline
Find More Posts by michaelingp
Registered User
Quote:
Originally Posted by viper522 View Post
Might be time to patronize your LHS
Let's see. He bought the plane from Lee, he bought the glue and tape from Home Depot, he bought the transmitter who knows where, and he bought the parts from Hobby King (I'm speculating, of course, but you get my drift). How ethical is it to take up LHS professionals' time for this?
Old Feb 08, 2013, 06:13 PM
viper522 is offline
Find More Posts by viper522
Registered User
Quote:
Originally Posted by michaelingp View Post
Let's see. He bought the plane from Lee, he bought the glue and tape from Home Depot, he bought the transmitter who knows where, and he bought the parts from Hobby King (I'm speculating, of course, but you get my drift). How ethical is it to take up LHS professionals' time for this?
pa·tron·ize
/ˈpātrəˌnīz/
Verb

Frequent (a store, theater, restaurant, or other establishment) as a customer.

Synonyms
support
Old Feb 08, 2013, 06:35 PM
Lee is offline
Lee
Find More Posts by Lee
Lee
PERFECT LANDING !!!
Lee's Avatar
I have learned that if one person asks a question that another 20 had the same question but didn't ask. We get a lot of E-mails from people who don't post on the threads.
Old Feb 08, 2013, 10:49 PM
TheMagician007 is offline
Find More Posts by TheMagician007
Registered User
TheMagician007's Avatar
Quote:
Originally Posted by viper522 View Post
Might be time to patronize your LHS
Huh? My LHS?
Old Feb 08, 2013, 10:50 PM
TheMagician007 is offline
Find More Posts by TheMagician007
Registered User
TheMagician007's Avatar
Thanks for the help everyone
Old Feb 09, 2013, 12:08 AM
viper522 is offline
Find More Posts by viper522
Registered User
Local Hobby Shop
Old Feb 09, 2013, 08:30 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by rhodesengr View Post
Just wondering what the guidance is regarding trimming the length of the motor shaft on the CF 2812. It is longer than it needs to be.
Good idea?
Bad idea?
Really necessary?
Useful but not required?
Yes, I would cut it off, but it's not requried I don't think? I used a rotary tool (Dremil) with a cutoff wheel, didn't think about the filings, but I blew it out well? (got a couple of spare's). pushed prop saver all the way to housing & wacked it off! used a larger bit to just start a hole for the dimple on saver to fit in and strap it on, I use 2 O-rings, works well.
Old Feb 09, 2013, 08:39 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by Chris Avllino View Post
Have an assassin that someone gave me and can bind it on my dx7, use delta configuration, but can't get the right setup. I guess my question is, can anyone walk me through a dx7 setup? I'm wondering if I have to reverse the servos...
I'm not familiar with the Dx7, but my Dx8 you select Elevons on wing type, but I did have to reverse my servo leads to Rx to make it work right? it said something in the book about Elevon-B setting to eliminate having to do that, but couldn't figure it out, after swapping leads she works perfect!
Old Feb 09, 2013, 08:46 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
My Assassin is weighing in around 17 to 17.2 oz's, my scale is sensitive, it bounces between 17 &17.2... but it seems to be just a hair tail heavy according to the CG measurments from instructions. hate to add more weight? any sugestions?? going to maiden it today and see how she fly's! one good thing, can't tear it up!!
Old Feb 09, 2013, 09:03 AM
viper522 is offline
Find More Posts by viper522
Registered User
take it out there along with a couple sticky automobile wheel weights, apply as needed to get it flying well
Old Feb 09, 2013, 09:27 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Quote:
Originally Posted by viper522 View Post
take it out there along with a couple sticky automobile wheel weights, apply as needed to get it flying well
when you make a mark 6.5in from nose, how far out towards wing tips do you balance from? or does it really matter? about half way it's seems to be close but a fine line! I can slightly move my fingers, and one time it will fall backwards, and sometimes it will fall forward, I'm guessing it should balance at the 6.5in mark right?
Old Feb 09, 2013, 11:59 AM
tupeloflyer is offline
Find More Posts by tupeloflyer
Dixie Sky Devils
tupeloflyer's Avatar
Ok Folk's! I'm a believer now! the Assassin is the toughest plane on the planet!! I had to go and maiden mine this morning (in gail force wind btw) and after I found "my way" to launch it,(frisbee style) It flew GREAT!,I had my rates a little too high and was a little squirrelly at first, but for a 7 dollar motor the emax cf2812 will scream on this thing! especially down wind in 10 to 15mph wind!!. It took a couple of so called "lawn dart" landings with no damage what so ever!. a couple of clicks of trim is all it took, This thing is a blast! I'm officially hooked! now I got to start working on my flying bubbies, (after I practice enough to take them down of course!) cool Plane! Thanks for all the help, and sorry for all the stupid questions! Tupeloflyer..
Last edited by tupeloflyer; Feb 09, 2013 at 02:54 PM.
Old Feb 09, 2013, 02:59 PM
viper522 is offline
Find More Posts by viper522
Registered User
See you just have to toss it up and fly it. these things are great.
Old Feb 09, 2013, 03:21 PM
Bluhammer is offline
Find More Posts by Bluhammer
Bay Area Prop Buster
Bluhammer's Avatar
Until I get the VisionAir and finish building and maiden my EP Reactor Bipe the Assassin is most definitely my favorite plane ever! It's awesome.

Blu


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Qjet Flamingo & Butterfly: A plane no one has!! romans1015 Parkflyers 3 Sep 04, 2016 06:47 PM
WALLY WING...no fins...flies great!!! gpw Foamies (Kits) 32 Aug 31, 2016 09:21 AM
Qjet Flamingo & Butterfly: A plane no one has!! romans1015 Parkflyers 6 Jan 29, 2004 05:05 PM
Noob concept plane Mikey C. Foamies (Kits) 5 Nov 11, 2003 02:05 PM
It's a boat...It's a plane...no! It's flightship! MrBungle Electric Plane Talk 24 Jun 26, 2001 02:55 AM