Help with a power system for a Super Falcon 120
I am going to convert a Super Falcon 120 to an electric pusher config. I have seen some threads on EDF but nothing really showed up in a search for a basic electric conversion.
I have narrowed it down to two likely power systems but I want to get some feedback on which would be the better path. I am not sure if I should go for more RPMs and a smaller prop or a little bigger diameter prop and lower RPMs. I think conventional wisdom is larger props are better from an efficiency viwpoint.
I expect to be in the 17-18lbs range RTF
The two power systems I am looking at are 10S based.
Scorpion 4035-380 swinging a 12.5x10
Watts in 2400 and change
Pitch speed 120mph
Static thrust 300 oz
Scorpion 4035-460 swinging a 11x9
Watts in 2380
Pitch Speed 133mph
Static thrust 285oz
I know these are "calculated" not measured performance numbers but with that in mind which way would you go? Most discussions seem to be based around 3d style power systems. I am looking for something geared to a decent speed in a sport style plane. I am going to use the Falcon as a "jet" trainer with retracts and flaps.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||HELP puting together power system for skateboard, plz||Nek||Power Systems||8||Jul 18, 2008 11:36 PM|
|Help!||Power system for a Super Sportster 40 MkII||methos||Power Systems||6||Mar 09, 2008 09:12 AM|
|Help needed selecting power system for F1A conversion.||Lancer31||Electric Sailplanes||0||Jun 20, 2005 10:19 AM|
|SOme help with a power system||pequeajim||Power Systems||8||Mar 05, 2004 09:37 PM|
|Help with GWS power system||DavidMC||Scratchbuilt Indoor and Micro Models||1||Jan 06, 2004 10:52 AM|