Sapac L-39 foam best dress up contest - RC Groups
View Poll Results: Who is the best?
Tumbler (post 7) 4 9.09%
Scallan (Post 9) 2 4.55%
Jayb1rdz (post 173) 8 18.18%
Hole Digger (post 31) 5 11.36%
Twawsi2 (post 139) 4 9.09%
Dadude (post 146) 21 47.73%
Voters: 44. You may not vote on this poll

Thread Tools
Apr 20, 2009, 06:31 PM
Registered User
Sapacbill's Avatar
Poll

Sapac L-39 foam best dress up contest


There are so many schems for L39, so we come up a simple version, mostly white to leave room for you to paint it youself.
Post your paint job, let people judge.

The winner will get a composite version of L39, with fan and the new Sapac motor (1600 watts with 5S), and a set of retracts.

Game is on! The contest will end on Jun 20, you will have two months.
Sign up now
to remove ads between posts
Apr 21, 2009, 01:50 AM
Registered User
Sapacbill,

Only open for USA or the rest of the world?

rgds

David
Apr 21, 2009, 06:33 AM
Registered User
Sapacbill's Avatar

First International Sapac America RC Airplane Paint Scheme Competiton (L39 foam)


Reward covers shipping cost to US only. If you are outside US, you may have to pay shipping if you win.
Last edited by Sapacbill; Apr 21, 2009 at 06:40 AM.
Apr 21, 2009, 06:37 AM
Registered User
Sapacbill's Avatar

Tumbler's plane


https://www.rcgroups.com/forums/atta...mentid=2473343

Brian, you may want to submit a better picture.
Apr 21, 2009, 06:38 AM
Registered User
Sapacbill's Avatar

Sean's plane


https://www.rcgroups.com/forums/atta...mentid=2475384
Apr 21, 2009, 08:49 AM
-
So any Scheme we can come up with?
Apr 21, 2009, 08:50 AM
Registered User
Tumbler's Avatar
Here she is ready to roll! I have about 10 flights on her before the paint, so I am hoping the paint job is not the curse of death haha.



Brian
Apr 27, 2009, 02:00 AM
Registered User
Aaron Wallace's Avatar
This is the scheme that I am working on.
May 11, 2009, 02:18 PM
Registered User

CCCP theme


Here is my White & Red CCCP theme!
I converted it into a pusher and launch with a bungee;-)

Sean
May 11, 2009, 02:20 PM
Registered User
Tumbler's Avatar
Scheme looks cool, but for converting to a pusher you should be put in jail!!

Quote:
Originally Posted by scallan
Here is my White & Red CCCP theme!
I converted it into a pusher and launch with a bungee;-)

Sean
May 11, 2009, 02:49 PM
Registered User
anthodenn's Avatar
I have the jail keys around here somewhere....um....I got 'em...uh Sean, come me sir...
May 11, 2009, 02:59 PM
Registered User
Twawsi2's Avatar
The part that you guys missed is that the Corsair that he has underneath of the L-39 has JATO Packs,
May 11, 2009, 07:47 PM
Never fly an A model anything!
jayb1rdz's Avatar
Shot your white early my son. Is that a Sapac L-39 or a funjet?????
Put the fan back in.......hi speed props remind me of my ex.
May 11, 2009, 08:37 PM
Registered User
Aaron Wallace's Avatar
OK... My bird is nose heavy! CG 612mm from the nose or right at the LE of the main gear retracts. 4S 3200 20C. I would like to use a 4S 4350 25C that I have. I could cut some of the foam away toward the wing saddle but, I do not want to weaken the structure. I can't move the fan aft without major cutting. Brian? Anyone? Also, I am almost ready to prime and paint. I am concerned about painting the bottom of the wing with the preinstalled servos and hinges. I can put a small amount of vaseline on the hinges but, is there any need to avoid painting the servos, servo arms, or the wires?

Thanks,

Aaron
May 11, 2009, 10:59 PM
Registered User
Tumbler's Avatar
Mine is balanced right at the leading edge of the retracts, which is right around 600mm from the nose I believe. If its close don;t worry about it. If its a hassle to cut out foam and it won;t take much to balance, just add a little weight to the tail for now before hacking it up. Just tape it to the bottom. You can cut into it and glue it in permanently if you want of make room inside to move the battery back. Nose heavy takes a lot less weight to fix than if it were tail heavy, so thats a good thing!



Quote:
Originally Posted by Aaron Wallace
OK... My bird is nose heavy! CG 612mm from the nose or right at the LE of the main gear retracts. 4S 3200 20C. I would like to use a 4S 4350 25C that I have. I could cut some of the foam away toward the wing saddle but, I do not want to weaken the structure. I can't move the fan aft without major cutting. Brian? Anyone? Also, I am almost ready to prime and paint. I am concerned about painting the bottom of the wing with the preinstalled servos and hinges. I can put a small amount of vaseline on the hinges but, is there any need to avoid painting the servos, servo arms, or the wires?

Thanks,

Aaron


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Sapac L-39 RX ready version Tumbler Foamy EDFs 250 Mar 01, 2011 09:57 PM
Discussion Sapac L-39 & T-45 Composite + Hoffman 70 Storm Esprit Dean Electric Ducted Fan Jet Talk 65 Aug 22, 2010 12:25 PM
Discussion New sapac l-39 ADV Foamy EDFs 12 May 14, 2010 04:08 AM
Sold N.i.b. Sapac L-39 W/free Black Tornado Motor & Shipping PREACHHAMES Aircraft - Electric - Jets (FS/W) 14 Mar 21, 2009 07:52 PM
opinions: best fan/brushless motor combo for K&A L-39 jlk Electric Ducted Fan Jet Talk 14 Aug 27, 2002 05:43 PM