Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by Steve Boone, who may elect to delete unwanted replies.
Old Aug 08, 2009, 11:01 AM
L-Spatz is offline
Find More Posts by L-Spatz
Registered User
L-Spatz's Avatar
I use 1 1/4 wide white plastic ribbon in two 6 m lengths held down with 5, 3 inch nail's. I put it in a + pattern and measure from the center nail head to the tip of the nose. It makes judgeing the set down point real easy.




Ken
Sign up now
to remove ads between posts
Old Aug 08, 2009, 11:04 AM
StevenatorLTFO is offline
Find More Posts by StevenatorLTFO
AKA - The "Flywheel"
StevenatorLTFO's Avatar
I made a practice tape from some strapping material bought at a hardware store, and I just made markings on it with a Sharpie. I have it marked at 1 point per 2 inches, and originally it was pretty long, but I've gotten lazy, so I cut it down to about 4 feet in length so I don't have so much to roll up
Old Aug 08, 2009, 11:06 AM
L-Spatz is offline
Find More Posts by L-Spatz
Registered User
L-Spatz's Avatar
I guess Bob Dylan was right after all. "Ya Gotta Serve Somebody" ,if Steve(the BIG Kahoona) has a honey do list .


Ken
Old Aug 08, 2009, 11:22 AM
Steve Boone is offline
Find More Posts by Steve Boone
founder of the SSP
Steve Boone's Avatar
Nice avatar their Thermaler. I use Thermalers tape but it makes my head hurt doing the math. I've been too lazy to make us a new one in 2" increments. I still haven't made the foot board for the winch/retiever or any of the other mutitude of current projects yet either. Well at least I'm consistent.
************************************************** ************************************************** *************
HELP PLEASE: Do we have a web designer in our midst? Thermaler and I have been discussing what I want to do next and it's beyond our current abilities. So if you have mad web design skills and wouldn't mind donating a bit of time to help get things set up drop me an e-mail or PM.
Old Aug 08, 2009, 11:40 AM
Steve Boone is offline
Find More Posts by Steve Boone
founder of the SSP
Steve Boone's Avatar
Now that's some funny stuff Ken. Of course I have a honey do list. TOISS (the one I seldom see) works 6-12 hr shifts and I'm on disability. So I try to do all of the house work until things let up for her. She forces me to go flying and spend time with the guys though, so it's all good. Today I picked green beans and weeded the garden in the rain. Not smart since I've been sick all week but it had to be done. Plus trying to get things done for the SSP and I still haven't finished the woodworking project for my daughter's Christmas present for last year, several r/c projects including sailplane bags I'm designing and trying to make. The big kahoona is way over worked and under staffed. If I get any more commitments, I'm going to need to be committed. I just never learned how to say "no more" very well.
Old Aug 08, 2009, 01:05 PM
Thermaler is offline
Find More Posts by Thermaler
Balsa breaks better
Thermaler's Avatar
Thanks Steve, yours looks neat but you know me and being different. I could not get it to "resize and look right so O copied and pasted, added my favorite color to the font and..
I am going to change the caption to my number when I get the last task done.
Now back to the tasks I should be doing.

Joe
Old Aug 08, 2009, 01:35 PM
maguro is offline
Find More Posts by maguro
OpenTX University Staff
maguro's Avatar
I too use a piece of T-shirt. I just measure from the center with a 10 foot tape measure. Most of my landings do not require the use of the tape, because they are too far off. Today I made a landing that didn't need a tape, because it was so close.

I attached a photo. The inner circle is 30 mm in radius. It was 1" but the fabric stretches. I made one other spot today. It was 1.23m from the center. Ordinarily I would consider that a terrific landing, but it came after the 3 cm landing.

Roger
Last edited by maguro; Aug 08, 2009 at 03:41 PM.
Old Aug 08, 2009, 02:19 PM
northernlightsfl is offline
Find More Posts by northernlightsfl
Registered User
northernlightsfl's Avatar

Sportsmans Soaring program


This ia a truly great idea. Up here in remote Alaska i have been teaching some young people and a couple adults soaring.

Now with this idea you have made it possible for some of these pilots to acheive a great goal.

I know I will support the porgram and tell others about this as well.

Thanks for the hard work Richard Davis Wilderness Aviation/Fire Eaters in Tok Alaska
Old Aug 08, 2009, 08:05 PM
L-Spatz is offline
Find More Posts by L-Spatz
Registered User
L-Spatz's Avatar
here is my landing tape. Each arm is 3m long. Measureing from the center of the center nail head gives a acuracy of about 1/16 inch. Close enuff for my landing's.
Old Aug 08, 2009, 10:55 PM
corsha99 is offline
Find More Posts by corsha99
launch height can't fix stupid
Alright, I am almost ready to mail in my completed copper level. Will bang out the landing tasks tomorrow and it will be on its way on Monday. Nothing but slope tasks otherwise.
Old Aug 09, 2009, 12:05 AM
L-Spatz is offline
Find More Posts by L-Spatz
Registered User
L-Spatz's Avatar
Well Done. They are only going to get better from here on in.


Ken
Old Aug 09, 2009, 02:36 PM
ecormier is offline
Find More Posts by ecormier
Registered User
ecormier's Avatar
Argh! Too much stuff going on this summer! Can't wait to try out this program.

Quote:
Originally Posted by L-Spatz
here is my landing tape. Each arm is 3m long. Measureing from the center of the center nail head gives a acuracy of about 1/16 inch. Close enuff for my landing's.
I'll trade you some trees for some of that wide open space.
Old Aug 09, 2009, 04:07 PM
Steve Boone is offline
Find More Posts by Steve Boone
founder of the SSP
Steve Boone's Avatar
corsha99: Since you did only the slope task, I would like to know if you found it challenging enough or was it a bit too easy? Also, how long did it take you to complete all of the slope tasks? How many attempts did the slope tasks take? Any other input on the slope tasks you can give me. I'm just curious. Also, how long have you been flying slope? If you want you can PM me the details. Thanks in advance for the help. I hope to see your form arriving in the mail soon. Well, to be honest I hope it doesn't get here too soon. Our weather sucks right now and I'm trying to be member #2. Still need that last 30 minute flight.
Old Aug 09, 2009, 06:20 PM
L-Spatz is offline
Find More Posts by L-Spatz
Registered User
L-Spatz's Avatar
Quote:
I'll trade you some trees for some of that wide open space.
You should send the tree's to BC as they are needing a lot of new ones.

My spot that I practice for my CX flight's are 100km X 100km (60miles X60miles) of nothing but a few fence line's and the occational cow's and Oil Pump Jack's, and it has a network of gravel roads so getting around is good. On a busy day you may run into 2 other people. Not uncommon to get thermals running to 12,000ft, so a good onboard altimeter is a must have.


Ken
Old Aug 09, 2009, 11:15 PM
L-Spatz is offline
Find More Posts by L-Spatz
Registered User
L-Spatz's Avatar
Just finished talking to a fellow glider guider, and he came up with a wonderfull idea: as you complete each task sheet, list on here what what you flew each of the task's with!!

Example: the TD task's used a G/Lady average flight time 42 minutes
slope tasks used a D.A.W 1-26 average flight time 32 minutes

This way new comers can see what is popular and can get an idea as to the choice of what to fly. There maybe oddly enuff, times where a lone aircraft is used for all task's ,IE: a GL used for TD and Slope task's.

Just a thought(Thanks Doug)


Ken


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Old Buzzard's Soaring Video or Book Gvflyer Thermal 26 Jun 18, 2015 04:57 PM
For Sale: Old Buzzard's Soaring Book bobh344 Aircraft - Sailplanes (FS/W) 1 Feb 21, 2005 10:09 PM
Old Buzzard's Soaring Book clayjrw Aircraft - Sailplanes (FS/W) 31 Dec 20, 2003 09:17 PM
FS: OLD BUZZARD'S SOARING BOOK pic here & on Ebay TTT1111 Aircraft - Sailplanes (FS/W) 0 Nov 17, 2002 11:54 AM
WTB Dave Thornburg's Old Buzzard's Soaring Book Mauilvr Aircraft - Electric - Airplanes (FS/W) 2 Jul 08, 2002 12:29 AM