A mixed Low and High Aspect ratio flying wing glider design for thermalling - RC Groups
Thread Tools
Mar 26, 2009, 06:31 AM
Physics hate's my ideas
GreenAce92's Avatar

A mixed Low and High Aspect ratio flying wing glider design for thermalling

So i hope that with a higher aspect ratio on outer wing panels(with some dihedral built in) and also a long root chord for center panel, that i eliminate alot of the downward force unless thats not what happens... since it is a flying wing... but anyways i have to do a control system like this so that i can still manage pitch by the CH3 stick. It will probably only use 2 servos, unless i put in 3 so i can have one for a rudder. It will require quite a far forward CG to fly stable but what do you guys thinK? im veering away from the pod n' tail gliders because i have short booms and the foam is weak to build a full tail without reinforcement i dont have money to buy kite booms so i figured this would work best, and would add another bird to the flat ground thermal collection.
Sign up now
to remove ads between posts
Mar 26, 2009, 12:57 PM
Registered User
Good site for thermal flying wings.

Mar 26, 2009, 05:42 PM
Physics hate's my ideas
GreenAce92's Avatar
Hmmm those are some great wings!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Airfoil for high aspect ratio wing, HP-18 glider cgraf Scale Sailplanes 18 Aug 04, 2009 04:58 PM
Help! Good airfoil for a flying wing glider parkerwe Hand Launch 8 Feb 07, 2008 09:21 PM
Discussion Wingo with High Aspect Ratio Wing Tricktrack Aerial Photography 3 Feb 05, 2007 04:15 PM
Help! Request for twisty wing plane span and aspect ratio (or wing area) data Sled Driver Slope 17 Oct 28, 2006 12:44 PM
Need help with flying wing biplane design stevenfrancis2000 Power Systems 11 Apr 07, 2002 05:01 PM