Maxi Swift FPV Project - RC Groups
Thread Tools
Mar 23, 2009, 03:13 PM
Suspended Account

Maxi Swift FPV Project

I am putting together a MS Composit Maxi Swift to use as an FPV platform. I've installed a 480 out runner, 40 amp ESC, 2 HS82mg servos, BEC, Pan/Tilt pod from MrPibb and a Futaba 72mhz receiver. I'm waiting for a 2.4gig 1 watt lawmate transmitter, KX171 camera and a Black Stork OSD. Here are a few pictures.
Sign up now
to remove ads between posts
Mar 23, 2009, 03:39 PM
the guy
Looks awesome, I'm also planning on mounting a camera on a wing. Looks good
Mar 24, 2009, 02:39 PM
Suspended Account
I am still waiting on my video equipment from New Generation Hobbies so I was experimenting with 2 props, 10x7e and 10x5e. I can't believe the power difference between the 2, the 10x5 has more thrust and lower amperage use then the 10x7. I can't wait to see how this thing flies.
Apr 04, 2009, 03:05 PM
Suspended Account
I am almost finished with my Maxi Swift FPV, here are a few pictures. It weighs about 2.7 pounds and is powered by a 3s 2200 mah and 3s 610 mah. I don't have an OSD installed now, I am looking for one that will support a flying wing with the return to home function.
Apr 09, 2009, 10:16 AM
Suspended Account
I just got back from test flying my Maxi Swift FPV and she flys AWESOME. I got in 5 flights with 2 full FPV flights with landings wearing goggles. I am using a 2200mah pack on the power side and should be able to do 45 plus minutes in the air with good throttle management. This thing flys so slow I could easily catch it in my hands on landing if I wanted to.
Apr 09, 2009, 10:29 AM
Yeah Baby
bignose13's Avatar
Looks good, just one thing though, how do you find the lawmate tx wires coming out of the unit? I had one but the video wire came off the board because the soldering was pants, i am thinking of hot glueing the gap between the wires and the metal frame.
Apr 09, 2009, 11:58 AM
Mr.Pibb's Avatar
Sounds Great! Were you able to record the flights?
Apr 09, 2009, 12:49 PM
Suspended Account
Originally Posted by Mr.Pibb
Sounds Great! Were you able to record the flights?
Hi Tim,
Not yet, I still have to get a recorder for my Ground Station. I don't know which one to get yet. The P/T Pod you made works great and fits this plane perfect.
Apr 20, 2009, 11:53 AM
Suspended Account
I got 6 flights in on sunday and had a blast. This plane flys better in the wind with the 3s 3300 mah pack that it does with the 3s 2200 mah pack.
Jun 10, 2009, 08:52 AM
Registered User
techspy's Avatar
I am thinking of changing my FPV setup over from my Easystar to a wing. I am just not happy with the stability and slow speed flying of the Easystar. How slow can you fly at that weight? I have the Eagle Tree OSD Pro and would be using that and the Co-Pilot. if the OSD Pro wont work with elevons, I have a elevon mixer that I could use instead of elevon mixing in the radio, which should make it work. You may want to consider that route too.

Where is the best price for the Maxi Swift?
Last edited by techspy; Jun 10, 2009 at 08:59 AM.
Jun 10, 2009, 09:02 AM
Suspended Account
The Maxi is perfect for what I want out of FPV flying, it is stabile yet can do loops and roll with ease. Alex from RV is sending me a beta patch that will support elevons so I will be testing that out in a few days. I had an Easy Star and it was a dog with the added weight and had short flight times. I'll post some new pictures of my Maxi today.
Jun 10, 2009, 09:09 AM
Registered User
techspy's Avatar
Cool, where is a good place to get a Maxi Swift?
Jun 10, 2009, 10:03 AM
Suspended Account
Here are a few pictures of my Maxi.
Last edited by Tarro; Jun 10, 2009 at 10:12 AM.
Jun 10, 2009, 10:40 AM
Suspended Account
trappy's Avatar
Your swift must be a featherweight! Nice!

Techspy: Try googling. Can't help you with a US hobby store that ships them as I'm in Europe. Every big store in europe sells them, though.
Jun 10, 2009, 11:39 AM
FPV Desert Beta Test Center
Originally Posted by techspy
Cool, where is a good place to get a Maxi Swift?
You can order them directly from MS Composit in the Czech Republic. They say they can ship within a week of order.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion MS Composit Maxi Swift Tamudoc04 Flying Wings 1092 Oct 06, 2017 07:33 AM
Cool FPV project: EDF jet with cam and VR headset VRflyer Electric Ducted Fan Jet Talk 18 Jan 06, 2007 10:16 PM
Build Log FPV-project 2005-2007+ absolute-zero FPV Talk 24 Jan 02, 2007 02:28 PM
Cool FPV project: Adding an altimeter onboard my Easystar (remake) VRflyer Aerial Photography 25 Nov 12, 2006 04:59 PM
Build Log FPV - Project "Infinity" (Delta 5) build out.. typicalaimster Aerial Photography 11 Nov 07, 2006 11:07 AM