Alfa MiG15 Bis with Don's Wicked 4800kV - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by CaseySP, who may elect to delete unwanted replies.
Mar 20, 2009, 06:47 AM
Registered User
CaseySP's Avatar

Alfa MiG15 Bis with Don's Wicked 4800kV

Bit old now...

I changed the power system in the Alfa MiG15 from what was described earlier below after seeking more vertical performance and bigger loops. I was also warned that the old motor was probably due to let the smoke out any time soon.

Couldn't be happier. The motor was a true bolt-in proposition as promised by Don, but the speed controller installation in the thrust tube and associated wiring was a bit of a headache as it all becomes a bit of a squeeze back there and you need to make sure nothing can foul the elevator servo.

Performance is amazing, and despite the greater performance and weight i get longer flight times then the old setup. The only noticeable negative impact is that I find I need longer to setup for a landing as the glide is much faster then before.

Motor: - Don's Wicked 4800kV
EDF:- Alfa with 5 blade fan (385W @ 32.9A)
ESC:- X-Power 40A BEC mounted in thrust tube
Battery:- Rhino 3S 2350 25C
Radio:- JR2610 TX, R770S SPCM RX, HS81 (aileron) HS55 (elevator)
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video Phase 3 F16 - Alfa 5 blade fan with Don's Wicked EDF motor on 4S - Onboard Video Tweakrr Electric Plane Talk 16 Apr 21, 2010 03:09 PM
Sold Alfa a-4 with Don's RC extreme motor and fan..$130 shipped NoM'rcrashPlease Aircraft - Electric - Jets (FS/W) 5 Sep 06, 2008 08:26 PM
Video Phase 3 F-16 with Don's RC 4800KV on 4S Twinkletoze Electric Plane Talk 12 Jun 17, 2008 03:05 PM
Sold New Don's Wicked 4800KV EDF Motor Twinkletoze Aircraft - Electric - Power Systems (FS/W) 1 Jan 31, 2008 11:56 PM
Sold Alfa 5 blade fan/ Don's wicked edf motor (LOWERED PRICE) diamondback21 Aircraft - Electric - Power Systems (FS/W) 5 Jan 31, 2008 12:29 AM