Thread Tools
This thread is privately moderated by Bombay, who may elect to delete unwanted replies.
Mar 17, 2009, 01:46 PM
Slow Flyer
Bombay's Avatar
Thread OP

In the Hangar...

In the Hangar...

> PZ Micro Cessna 210 #1
> PZ Micro Cessna 210 #2

> Hobbico FlyZone SkyFly #1 - Pushrod and hinge mods
> Hobbico FlyZone SkyFly #2 - Night Flyer with Glowire

> Parkzone Slo-V - NightFlight Module and Sonic Combat Module
Stock setup but running on the 8.4v battery instead of the 7.2v(tired & retired)

> Brushless Slo-V - Brushless setup with Glowire and flashers
Motor - BP 9YSS Outrunner Brushless Motor With Short Shaft at 840 kv.
Prop - GWS 12x6 SF
Servos - Hextronik HXT900 9gram
ESC - HW25A with programming card
Battery - Rhino 1250 2s 20C lipo
RX - AR6100E
Amps - ~10-11

> Cox Lazy Bee (Bionic Bee)
Motor: BP 8YSS Outrunner
Prop: APC 10x3.8 Slo Fly with large aluminum collet spinner
Battery: 3s 2150mah Rhino
Speed controller: Castle Creations T-Bird 36 (used it for the extra weight)
Servos: GWS Park LF (17grams)
Receiver: AR6100
Amps: ~12 (need to use throttle management)

..........Successful maiden flights.

> War Eagle
Motor: Suppo 2212-15 (930kv)
Prop: 9x4.7 SF Need to play around with different props.
Servos: Hitec HS-55
Battery: Thunderpower Prolite 3s 2100mah 15c
ESC: SS 20A (card programmable)

..........Successful maiden flights.

MS Composit "Blade Dancer"
My first 3D plane
Motor: 2830-09 850kv
Prop: APC 11 x 3.8SF: 27 oz thrust, 12.5 amps, pitch speed 23 mph
Servos: HXT900 9gram and Power HD 8g
Battery: 3s 1300mah 25c
Receiver: AR6100e
ESC: CC 25A (usb progammable)
Plenty of expo and reduced rates

..........Successful maiden flight. ~10 flights. Flies great...still pushing the CG back to find the sweet spot.

> PZ Plug-n-Play F4U Corsair - various cosmetic mods
Battery: 3s FlightMax 2200mah
Receiver: AR700
Stock motor, esc, 3-blader prop, and servos
Lighting kit

> Scratch-built Flat Foamy F22 Raptor (based on Dekan's plans)
Motor: BP A2208-12 Brushless Outrunner (1800kv, 135w)
Prop: APC 6x5.5e
Servos: Power HD 8g
Battery: 3s 1000
Receiver: AR6100e
ESC: SS 20A (card programmable)

> Scratch-built Profile Foamy F22 Raptor (based on Tomhe's plans)
Motor: 2212-06 Brushless Outrunner (2200kv)
Prop: APC 6x4e
Servos: Power HD 8g
Battery: 3s 1550mah
Receiver: AR6110e
ESC: SS 30A (card programmable)

> Titan 60 Night Flyer Wing
Motor: CF2812-14 (1534kv)
ESC: 30amp rctimer
Battery: 3s 1550mah
Prop: 7x6
RX: AR6110e
Other: LEDs galore

> Scratch-Built AlleyCat profile pusher jet

> Assassin Combat Wing
Motor: CF2812-14 (1534kv)
ESC: 25 amp HK
Battery: 3s 1300mah
Prop: 7x6
RX: AR6110e
Servos: HS-82MG

In the "works"...

> e-flite T-34 Mentor

> Jeff Troy's Tamecat 40

> Wattage F22 Raptor

> Another Brushless Slo-V - Brushless setup
Motor - TBD
Prop - TBD
Servos - Hextronik HXT900 9gram
ESC - HW25A with programming card
Battery - TBD
RX - AR6110E
Amps - TBD

This one will have two wings that can be switched out. Both will be set with will be setup for a little more speed and durability...the other for night flying.

Last edited by Bombay; Jul 01, 2012 at 12:03 PM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What happens when the lights go out in the hangar... Mikey C. Parkflyers 2 Nov 08, 2003 05:35 PM
As Requested... Planes in my Hangar! boomerace Parkflyers 32 Sep 06, 2003 12:32 AM
I want a warbird in the hangar! RCace Scale Fuel Planes 2 May 26, 2003 10:56 PM
Big Sale! - Just making room in the hangar / shop Sal C Aircraft - Electric - Airplanes (FS/W) 62 Aug 31, 2002 04:43 PM
the "beast (J3 Stik) in the hangar firstdegree Parkflyers 6 Jun 24, 2002 07:33 AM