Thread Tools
Mar 25, 2010, 02:20 PM
If it flys, I like it
Heirmeistr's Avatar
600 scale blades? That is great news. I will start with a set of 3 for my Ecureuil!
Sign up now
to remove ads between posts
Mar 26, 2010, 02:02 PM
Registered User
Kin,
The 600 clones are junks insofar. I couldn't even say much about the EXI 500CF as I have two of them, although I like my Swift 16s. The Century Swift 16 is priced very nicely and parts are readily available at very reasonable price (same or lower than 500 clones).

Align is introducing 550 class, while new Swift NX is also released, it would seem extending both to 600 class is very doable in fitting into 600 class fuselages. Does you product plan for this year consider this application?

I remember you were considering to produce your own mechanic ..... does this still hold?

I might well get rid of the two EXI 500 CFs and keep only the Swifts which fly heck alot better. and the quality is better or worry free.
Mar 26, 2010, 08:03 PM
Registered User
Quote:
Originally Posted by kin
I have doing the scale 600 size rotor blades too ! it will coming out about 60 day ! Maybe !
Dear Mr. Kin,

Greatly appreciate if you can reply my email.
Mar 27, 2010, 04:05 AM
It should fly at least once
clive45's Avatar
Dear Mr. Kin,

I would greatly appreciate if you can reply my emails as well.
Mar 28, 2010, 11:25 AM
kin
kin
Composite factory
Dear Friend ! I reply already !
Mar 28, 2010, 11:33 AM
Registered User
Tedstrickland's Avatar
Kin,

Coukld you please advise when Trex 600 Cobra PDF manual will be available for download. I am very interested in purchasing Cobra, but would like to review installation. Do you plan to offer a OD green or other version? I note that USA vendor -Skyhunter - has unpainted version available. Thanks and keep up the good work.
Mar 29, 2010, 08:39 AM
Registered User
Quote:
Originally Posted by kin
Dear Friend ! I reply already !
Thank you for your reply but how many tomorrow I need to wait? Anyway, hope you can speed up the delivery.
Mar 29, 2010, 01:05 PM
Registered User
Hi Kin,
April is near.
Do you have some news about the seahawk 800size? Price?
And will there being planned a comanche fuselage in future?
Mar 29, 2010, 01:37 PM
kin
kin
Composite factory
Quote:
Originally Posted by Kleiner Pilot
Hi Kin,
April is near.
Do you have some news about the seahawk 800size? Price?
And will there being planned a comanche fuselage in future?
I just finish the work of the Alouette -3 first batch products , so i start the seahawk now ! I need dry fit the mechanic in this April to complete this sea hawk .Price will let you know soon !
Mar 29, 2010, 02:16 PM
Bird of Pray
Flying Dutchy's Avatar
If he produces a 500 or 600 size Comanche RAH66 I will buy one for sure!!!


Quote:
Originally Posted by Kleiner Pilot
Hi Kin,
April is near.
Do you have some news about the seahawk 800size? Price?
And will there being planned a comanche fuselage in future?
Mar 29, 2010, 02:43 PM
My other addiction!
norcalheli's Avatar
Quote:
Originally Posted by sidneyw
Kin,
The 600 clones are junks insofar. I couldn't even say much about the EXI 500CF as I have two of them, although I like my Swift 16s. The Century Swift 16 is priced very nicely and parts are readily available at very reasonable price (same or lower than 500 clones).

Align is introducing 550 class, while new Swift NX is also released, it would seem extending both to 600 class is very doable in fitting into 600 class fuselages. Does you product plan for this year consider this application?

I remember you were considering to produce your own mechanic ..... does this still hold?

I might well get rid of the two EXI 500 CFs and keep only the Swifts which fly heck alot better. and the quality is better or worry free.
Sidney,
Aren't the Swifts nice helis? Especially for the price. The E620 is exactly what you mention above, a Swift stretched to 600 size. My next build will probably involve a second Swift16 for me. Maybe with one of Kin's great fuses.
Mar 29, 2010, 03:26 PM
It should fly at least once
clive45's Avatar
The swift16 is not popular over here in OZ and only 1 shop supplies parts (Expensive and terrible web site). I have 2 16's and for the money they are very good, strong and fly well. I like them above the Align heli.
Mar 29, 2010, 06:14 PM
Registered User
Quote:
Originally Posted by norcalheli
Sidney,
Aren't the Swifts nice helis? Especially for the price. The E620 is exactly what you mention above, a Swift stretched to 600 size. My next build will probably involve a second Swift16 for me. Maybe with one of Kin's great fuses.
Yes, IMO the Swift 16 is the best price to performance ratio. Parts are inexpensive. I have been asking Kin to fit more fuselages for the Swift 16.
Mar 30, 2010, 02:58 AM
Registered User
Richard78's Avatar
Hi Kin,

How far is testing the fenestron?
Do you have already timetable for the fenestron with some fuselages?
Mar 30, 2010, 10:33 AM
kin
kin
Composite factory
Let see what thing doing the master mold ?It is a last night photo . so i think it have 20 day to complete the first model fuselage , it is epoxy products . The Qazelle will be the second , because some parts are commend use , so they will come out very close together .The fenestron system are 100% ok test fly . it have close to 9000-10000 rpm . But the main rotor still keep in 1500-1600 rmp (roughly ).


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Trex 450/500/600 and Honeybee King II in same pic anyone? turnbui Micro Helis 0 Mar 15, 2008 10:18 PM
Discussion Looking for a cheap 500-600 size brushless Jupeli Power Systems 33 Mar 02, 2007 05:42 PM
Wanted Inflatable Floats for Trex 450 and 600 size helis ShokWaveRider Aircraft - Electric - Helis (FS/W) 0 Feb 12, 2007 07:54 PM
Discussion Trex 450 - Trex 600 Size Comparison mrfirkin Mini Helis 3 Aug 26, 2006 09:18 PM
high-rate NiMH button cells Capacity mAh: 120,400,450,500,600 GKP27 Scratchbuilt Indoor and Micro Models 2 Jun 21, 2003 06:03 PM