View Single Post
Jan 24, 2012, 10:36 PM
Once u go yak u never go back
marksextra's Avatar
Quote:
Originally Posted by Capt. Roll View Post
One thing on this motor, the prop shaft is 12mm. Most props for the 71" Slick are going to be 10mm bore.

You'll need to enlarge the prop bore or find a bolt on prop shaft that is 10mm and will fit the Tacon. I found one at Value Hobby that is for the G110(63-54), G160(63-64) motors. Good price also, $3.59.
Nice tip. Thanks