cuavlindy's blog - RC Groups
Shop our Airplanes Products Drone Products Sales
cuavlindy's blog View Details
Posted by cuavlindy | Today @ 02:11 AM | 691 Views
CUAV from Guangzhou, China, has newly developed a new Pix codenamed V5. It will start a global public test recently. The following are known materials:

TB2q5b6q21TBuNjy0FjXXajyXXa_!!12580599TB2q5b6q21TB uNjy0FjXXajyXXa_!!12580599.png750x756 325 KB
Quick Summary
Main FMU Processor: STM32F765◦32 Bit Arm Cortex-M7, 216MHz, 2MB memory, 512KB RAM

IO Processor: STM32F100◦32 Bit Arm Cortex-M3, 24MHz, 8KB SRAM

On-board sensors:
◦Accel/Gyro: ICM-20689
◦Accel/Gyro: BMI055
◦Magnetometer: IST8310
◦Barometer: MS5611

Interfaces:
◦8-14 PWM outputs (6 from IO, 8 from FMU)
◦3 dedicated PWM/Capture inputs on FMU
◦Dedicated R/C input for CPPM
◦Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
◦Dedicated S.Bus servo output
◦5 general purpose serial ports
◦4 I2C ports
◦4 SPI buses
◦Up to 2 CANBuses for dual CAN with serial ESC
◦Analog inputs for voltage / current of 2 batteries

Power System:◦Power: 4.3~5.4V
◦USB Input: 4.75~5.25V
◦Servo Rail Input: 0~36V

Weight and Dimensions:◦Weight: 90g
◦Dimensions: 44x84x12mm

Other Characteristics:◦Operating temperature: -20 ~ 80c

It is known to use the F765 processor and many other upgrade updates. But I dont know if the current Ardupilot firmware supports it or not. Im going to use a traditional helicopter to test this flight control. I need to ask whether AC 3.6rc1 FW supports this.

Web:http://doc.cuav.net/flight-controller/pixhack-v5/en/147

Any more details , just feel free to contact us


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
Posted by cuavlindy | Today @ 01:43 AM | 713 Views
CUAV Pixhack v5 has already performed a preliminary test flight on the Alzrc 420 three-bladed version of my 420-level RC helicopter. It performs very well in all aspects. For example, the calibration process, vibration control, and flight stability of each sensor, the actual flight effect is still Quite well, thanks to the developers of ArduPilot, @tridge、@rmackay9、@ChrisOlson. they have efficiently released the Dev version firmware with great usability.
Posted by cuavlindy | Jun 11, 2018 @ 10:31 PM | 823 Views
CUAV Buyer funny flying

have you try to fly like this ?



CUAV Buyer flying (0 min 8 sec)

Posted by cuavlindy | Jun 11, 2018 @ 01:19 AM | 1,055 Views
Hi dear friend

our new pixhack V5 will online next month.
more detail can check the PDF or here for the instruction of pixhack V5

http://doc.cuav.net/flight-controller/pixhack-v5/en/

here is our ArduPilot Developer testing the pixhack V5 for your reference:

Pixhack V5 Continued Flight Testing (4 min 13 sec)



Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
Posted by cuavlindy | May 30, 2018 @ 02:45 AM | 976 Views
Today our technician testing for C-RTK testing , welcome to check it

C RTK TESTING (1 min 57 sec)



more details can check as below:

https://www.aliexpress.com/store/pro...78562fadnkJTKG
Posted by cuavlindy | May 29, 2018 @ 01:52 AM | 1,416 Views
About CUAV Pixhack V5

CUAV from Guangzhou, China, has newly developed a new Pix codenamed V5. It will start a global public test recently. The following are known materials:

http://doc.cuav.net/flight-controller/pixhack-v5/en/


Quick Summary
Main FMU Processor: STM32F765◦32 Bit Arm Cortex-M7, 216MHz, 2MB memory, 512KB RAM

IO Processor: STM32F100◦32 Bit Arm Cortex-M3, 24MHz, 8KB SRAM

On-board sensors:
◦Accel/Gyro: ICM-20689
◦Accel/Gyro: BMI055
◦Magnetometer: IST8310
◦Barometer: MS5611

Interfaces:
◦8-14 PWM outputs (6 from IO, 8 from FMU)
◦3 dedicated PWM/Capture inputs on FMU
◦Dedicated R/C input for CPPM
◦Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
◦Dedicated S.Bus servo output
◦5 general purpose serial ports
◦4 I2C ports
◦4 SPI buses
◦Up to 2 CANBuses for dual CAN with serial ESC
◦Analog inputs for voltage / current of 2 batteries

Power System:◦Power: 4.3~5.4V
◦USB Input: 4.75~5.25V
◦Servo Rail Input: 0~36V

Weight and Dimensions:◦Weight: 90g
◦Dimensions: 44x84x12mm

Other Characteristics:◦Operating temperature: -20 ~ 80c

It is known to use the F765 processor and many other upgrade updates. But I dont know if the current Ardupilot firmware supports it or not. Im going to use a traditional helicopter to test this flight control. I need to ask whether AC 3.6rc1 FW supports this.

Web:https://leixun.aliexpress.com
Posted by cuavlindy | May 25, 2018 @ 04:29 AM | 879 Views
hi dear friend ,

we just want to know , how many friends use our pixhack V3?

if you use , just let us know what do you think ?

we will sent to you some free Big coupons



Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
Posted by cuavlindy | May 03, 2018 @ 11:50 PM | 1,959 Views
here is our one customers review for our pixhack V3 for your checking


CUAV V3 Unboxing / Disassembly / Review (6 min 16 sec)



Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/
Posted by cuavlindy | Apr 24, 2018 @ 01:40 AM | 1,185 Views
hi ,dear friend

here is C-RTK review for you , thanks for checking

C RTK new products FROM CUAV (1 min 49 sec)



here is you can check more details :

https://www.aliexpress.com/store/pro...39f3c846NMvmxW
Posted by cuavlindy | Apr 19, 2018 @ 03:53 AM | 1,617 Views
Xtend XTP9B DPS 001PIX Wireless Data Transmission Module Kit RF Box 900mAh 1W for PIXHAWK/PIXHACK Flight Controller

Xtend XTP9B DPS 001PIX Wireless Data Transmission Module Kit RF Box 900mAh 1W for PIXHAWK/PIXHACK Flight Controller

Specifications:
- Model:Xtend-XTP9B-DPS-001PIX
- Indoor/city distance (with 2.1db antenna): Up to 900m
- Outdoor/wireless visible distance (with 2.1db antenna): 15-22km
- Sending power output: 1mW-1W(0-30dB)
- Seriel transmitting speed: 10-230, 400bps
- Receiving sensitivity: -110dB(@9,600BPS),-100DB@115,200BPS
- Transmitting speed: 9,600 or 115, 200bps
- Wireless RF transmssion speed: 125kbps
- Working temperature: -40~85 degree C
- Working frequency: ISM 902-928MHz
- Spread specrum: FHSS
- Networking topology: Peer to peer,point-to-point,point-to-multip
- Channel: 10 hop sequences share 50 frequencies
- Encryption: 256bit /128 BIT AES
- Voltage: 2.8-5.5VDC
- Receiving : 35mA
- Certificate: FCC,IC, C-TICK
- Size: 7.5*4.6*1.7cm
- Antenna weight : 24g
- Module weight: 29g
- Shell: 47g
- Total weight: 100g

Features:
- CNC XTEND shell, high quality
- 57600 baud rate with flight controller, distance over 20km
- Baseboard with USB port and TTL interface
- Working band ISM 900M, 115.2kbps, with a RPSMA antenna interface
- FHSS technology, transmitting power software adjustable 1mW-1W
Transmit power output 1mW 10mW 100mW 500mW 1W
Power voltage 2.8-5.5VDC 2.8-5.5VDC 2.8-5.5VDC 3.0-5.5VDC 4.75-5.5VDC
Transmit current (5V) 110mA 140mA 270mA 500mA 730mA
Transmit current (3.5V) 90mA 100mA 250mA 600mA N/A
Specifications:
Size (mm):84*46*17
weight: 39

package weight:300g

Package including:
- 2 x Data Transmission Module with shell
- 2 x Antenna
- 1 x Connection cable
- 1 x USB data cable


more details as below:

https://www.aliexpress.com/store/pro...40de109daiwTZr
Posted by cuavlindy | Apr 14, 2018 @ 03:38 AM | 1,294 Views
CUAV wireless data transmission Integrative Receiver ONE BOX Mavlink 5.8G servo for Flight Controller UAV quadrupter

ONE BOX is composed of CUAV autonomous flight controller developed for mav link digital image transmission integrated receiver
Built in 500MW sik data transfer (915mhz/433mhz)
Built in 5.8G 42 channel high sensitivity video receiver
The built-in OLED 128*64 screen and microprocessor, can display the flight condition and the state of vide
Through the micro USB interface to access the phone or computer, you can simultaneously obtain real-time flight video and UAV mavlink data
Compared with the digital link, it has a lot of advantages.
It's simpler:
The original data transmission and video transmitter can be used
Use a OTG USB line to connect your cell phone and your computer
It's more convenient:
The size is only 49mm*39mm in size (3 points per size for an ordinary cell phone)
He's cheaper
System communication framework diagram:

you can order here :

https://www.aliexpress.com/store/pro...77a9109duGnLaO
Posted by cuavlindy | Apr 10, 2018 @ 11:50 PM | 1,580 Views
CUAV NEW XBEE Radio link 250MW Wireless PRO 900HP integrates signal s Data Transmitter for Pixhawk Pixhack Flight Controller

The CUAV XB Radio PRO wireless data communication module provides best-in-class wireless connectivity for drones or IoT devices. They use the DigiMesh network protocol, have intensive network operations and support for sleep routers, and can also use proprietary point-to-multipoint configurations. These modules support RF line-of-sight ranges up to 28 miles (with high gain antennas) and data rates up to 200 Kbps, making them ideal for extended-range applications that require increased data throughput.

The CUAV XB Radio PRO does not require programming and can be easily configured using Digi's free XCTU software or through a simplified set of AT commands.

The built-in Digi XBee module has been pre-certified in multiple countries, further reducing development costs and shortening time to market.

The CUAV XB Radio PRO module is easy to use, shares a common hardware serial port, and offers a variety of different protocols so that users can integrate with your drone or device with minimal development time and risk.

Product Features:
Double-ended switching
CUAV XB Radio PRO has built-in TTL and USB ports, seamless switching between air and ground, and greater flexibility to reduce the cost of use.

Integrated RSSI output
CUAV XB Radio PRO integrates the signal strength output and can be directly connected to the drone controller, allowing the user to obtain the current signal strength in real time to determine the risk of loss.

you can order here:
https://www.aliexpress.com/store/pro...5987164eDDml2b

BR
lindy
Posted by cuavlindy | Mar 30, 2018 @ 01:20 AM | 1,069 Views
dear friend,

Good day. Thank you very much for your kindly support and understanding for our work in the long term.

Tomorrow is AliExpress's anniversary Shopping Festival. I will put more new products on the shelves. The price is more favorable. I hope to get your support.

here is our shop you can go and visit:

https://leixun.aliexpress.com

here we would like to express our best wishes to you and your lovely family.

May happiness and contentment fill your life!

Enjoy your nice time!

Best regards,

love you
Posted by cuavlindy | Mar 29, 2018 @ 04:23 AM | 1,215 Views
dear friend,

Good day. Thank you very much for your kindly support and understanding for our work in the long term.

Tomorrow is AliExpress's anniversary Shopping Festival. I will put more new products on the shelves. The price is more favorable. I hope to get your support.

here is our shop you can go and visit:

https://leixun.aliexpress.com

here we would like to express our best wishes to you and your lovely family.

May happiness and contentment fill your life!

Enjoy your nice time!

Best regards,

love you
Posted by cuavlindy | Mar 28, 2018 @ 04:44 AM | 1,354 Views
dear friend,
Good day. Thank you very much for your kindly support and understanding for our work in the long term.

Tomorrow is AliExpress's anniversary. I will put more new products on the shelves. The price is more favorable. I hope to get your support.
here is our shop you can go and visit:

https://leixun.aliexpress.com/store/...1d523e5fQgpmnn

here we would like to express our best wishes to you and your lovely family.

Wishing you a very happy and prosperous Diwali.

May happiness and contentment fill your life!

Enjoy your nice time!

Best regards,

love you
Posted by cuavlindy | Mar 27, 2018 @ 01:45 AM | 1,270 Views
we are the facotry to make the RC parts like flight control pixhack V3 APM, pixhawk, hacklink data link, data transmmion, and GPS, 3DR and son on 。

our shop will have big price discount during shopping festival on 3.28 March.

you can check our websit:

https://leixun.aliexpress.com...Continue Reading
Posted by cuavlindy | Mar 19, 2018 @ 02:20 AM | 1,201 Views
PW-Link
Product summary

The pw-link data transmission module is divided into built-in antenna and external antenna version. The built-in antenna version is only suitable for pix flight control near distance and regulate the use of the calibration parameters, and the external antenna version after a number of practical test and reasonable transmission distance is 450 meters. The use of computer mission planner ground station for a long time the connection test, average stability data the transmission signal is maintained at more than 90%. Because of its small size, long transmission distance, stable data, convenient connection characteristics, very suitable for small UAV data receiving several hundred metres.
PW-Link The whole communication mode is as follows:


https://www.aliexpress.com/store/pro...72b22faddTDi8o

BR
lindy
Posted by cuavlindy | Mar 14, 2018 @ 12:15 AM | 1,217 Views
CUAV NEW CPDB drone power distribution board 5V for FPV Drone Quadcopter 4-8 axis VTOL power distribution board quadcopter

Feature:
Holding higher input voltage: 10v-60v (3s~14s battery)
Each is factory calibrated to ensure consistent current and voltage detection accuracy
More accurate current and voltage detection: voltage detection accuracy: +- 0.1V; current detection accuracy: +- 0.2A
Support higher power output current: 5A
Maximum (detection) current: 60A
Supports higher input voltage: 10v-60v (3s~14s battery)
Each is factory calibrated to ensure consistent current and voltage detection accuracy
More accurate current and voltage detection: voltage detection accuracy: +- 0.1V; current detection accuracy: +- 0.2A
Support higher power output current: 5A
Maximum (detection) current: 60A

if you need ,just order in our shop,dear

https://www.aliexpress.com/store/pro...4ded34a0NW4aZ1
Posted by cuavlindy | Mar 12, 2018 @ 01:29 AM | 1,394 Views
WTR is cuav launched a new application in UAV ground station module for transmitting end WiFi transmission speed, the ground end of digital data into wireless WiFi data, realize the computer or mobile phone WiFi wireless connection UAV, instead of the traditional speed Bluetooth transmission module, to achieve a more reliable and convenient

FAQ common problems
WTR's WiFi name and password
SSID is cuav wtr_xxx (XXX is generated according to the internal MAC address)
WiFi password: cuavwtr666 (lowercase)

How to modify the WiFi name and password of WTR?
Modified by downloading the cuav hflight app http://fw.cuav.net/apk/HFlight.apk

Support baud rate type
Only 57600 baud rate is supported at present


Specification
wireless standards IEEE 802.11g,IEEE 802.11b
transmission speed 11g: Up to 54Mbps, 11b: up to 11Mbps
WIFI communication
distance
150-500 meters (depending on computer or mobile phone)
baud rate 57600
attended mode UDP:14550
channel range 1 - 13 (default 11 channels)
frequency range 2412 - 2472MHz
transmitting power 18dbm
WIFI type SMA TYPE
WIFI safety WPA/WPA2 security mechanism
communicating protocol Malvink+ pass-through
traffic rate 57600
working voltage 5V +- 0.25V
working current 100MA
working temperature -20 - 50C
Operation humidity 10% - 90%RH (non condensing)
Storage Temperature -40 - 80C
Storage Humidity 5% - 90%RH(non condensing)
Connector JST-GH 1.25mm 6P
WIFI Information
SSID CUAV_WTR_XXXXXX
Passwrd...Continue Reading
Posted by cuavlindy | Mar 09, 2018 @ 02:33 AM | 1,378 Views
hi ,dear friend

who know what is it in it

Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City,Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/