Shoveopoly's blog - RC Groups
Shop our Airplanes Products Drone Products Sales
Shoveopoly's blog View Details
Posted by Shoveopoly | Oct 23, 2017 @ 07:05 PM | 945 Views
Second blue Robocat done and flies good. Omnibus F4 Pro, Aokfly RV2306 2650KV motors, Foxeer 16:9 camera, GPS module, DALPROP 5x4 triblade, Wolfwhoop S833 5.8GHz 40CH 600MW Mini FPV A/V Transmitter, and Flysky X6B receiver. Pics to follow soon.
Posted by Shoveopoly | Oct 15, 2017 @ 06:42 PM | 723 Views
Built another Robocat for my sister. Not my normal choice of color, but she loves it. This one doesn't have any FPV gear. Due to my niece flying my blue cat, and losing it, parts are on order build another one. Never a dull moment in my life.
Posted by Shoveopoly | Oct 07, 2017 @ 04:25 PM | 1,366 Views
It took new motors and flight controller, but it flies good now. Having issues with the GPS unit, so took it off and flashed Betaflight. Thinking GPS might have gotten damaged when it landed up side down after motor failure with first flight. Weight is on par with first, minus 1550mAh vs 1300mAh. All in all, happy with it.
Posted by Shoveopoly | Sep 24, 2017 @ 02:13 PM | 1,249 Views
Madien was going well until motor 4 quit working. Back to the bench with this one. Time to get the Fluke out.
Posted by Shoveopoly | Sep 23, 2017 @ 10:07 PM | 1,327 Views
Here is my finished Robocat. Omnibus F4 Pro, Foxeer 16:9 camera, Gartt QE2205 motors, DALPROP T5040 V2, and a 1550mah battery. Finished all the set up, and will maiden tomorrow.
Posted by Shoveopoly | Sep 15, 2017 @ 04:56 PM | 1,314 Views
A little more progress. Still waiting on the camera and vtx.
Posted by Shoveopoly | Sep 10, 2017 @ 07:45 PM | 1,332 Views
Started my second Robocat. This one will have GPS and Inav. Not finished yet, but there is my progress.
Posted by Shoveopoly | Feb 12, 2017 @ 12:07 AM | 2,623 Views
Here are pics of my first build. I used an Omnibus F3 FC in a Robocat 270mm frame, Racerstar 4 in 1 ESC, Racerstar RF2205 2600KV motors, Eachine 700TVL camera with 200mW vtx, and a Flysky FS-i6x/X6B combo. Oh, and Kingkong 5040 triblade props. Build went well, with just a couple of mistakes. Moved a few things around after finishing it first time. First test flight didn't go well, but second was good. Look forward to snow to be gone to get outside with it fly it. Blue canopy pieces are on there way, and thinking about repainting yellow one silver.