HezarfenF16's blog - RC Groups
HezarfenF16's blog View Details
Posted by HezarfenF16 | Oct 11, 2017 @ 06:37 AM | 1,298 Views


Hello, after starting FPV with my old Furibee F90 which has brushed motors, I was looking for micro FPV racer with brushless motors and I decided to get this one after some research: KingKong 95GT. gearbest.com accepted to send me this for a review, many thanks to gearbest for this support
Brushed micro racer drones are cheaper but brushless motors are more efficient and long life than brusheds. So after improving your flight skills with a cheap brushed quad you may be want to upgrade to a brushless one too.

Below you can see detailed info and my review about it:


----------------------------------------------------------------------------------------------------------


PRODUCT PAGE: [BUY HERE] from Gearbest.com

Don't forget to use coupon: RC18OFF for discount!

KingKong 95GT a 95mm Brushless Micro FPV Racing Quadcopter Drone

(There are different receivers available (DSM2, FrSky, Flysky, Futaba, PNP), you can select the one that is compatible with your Transmitter)


WARNING!:
This is a BNF version which means Transmitter is not included in the package, you need to use your own Transmitter (need to be compatible with DSM protocol or you need to replace receiver inside the quadcopter with your own compatible receiver)


If you don't have a transmitter, I recommend take a look at this new transmitter Jumper T8SG Multi-Protocol 2.4G 10CH Transmitter with 4-in-1 RF Chip which is compatible with many receivers, so you could use it to fly many drones...Continue Reading
Posted by HezarfenF16 | Aug 07, 2017 @ 01:54 PM | 1,569 Views


Hello, I get my new drone named Furibee F90 Wasp Drone, which has 2S powered 8.5mm motors and SP RACING F3 EVO Flight Controller. So I think this may be a powerful TinyWhoop KILLER with 90mm size! Also it has betaflight Flight control software inside (comes preinstalled) which makes it possible to change pid values etc on the computer to find your best settings!

Also I have a special coupon limited to 20 pieces! With coupon it is about 73.19$! Below you can see links to the product page, detailed specs, my unboxing and review videos and review article:

----------------------------------------------------------------------------------------------------------


PRODUCT PAGE: [BUY HERE] for 73.19$ with coupon:FurkanF90 [BNF] with DSM receiver


WARNING!: This is a BNF version which means Transmitter is not included in the package, you need to use your own Transmitter (need to be compatible with DSM protocol or you need to replace receiver inside the quadcopter with your own compatible receiver)

----------------------------------------------------------------------------------------------------------

Detailed specs:
SP Racing F3 EVO Brushed Flight Controller
8.5mm 8520 Coreless Motors
2S 7.4V 400mAh 30C lipo
Buzzer
Wasp like design carbon fiber + plastic frame
600TVL 25mW 5.8GHz AIO FPV Camera, 120 FOV
44mm three-blade props

Package Contents: 1 x F90 RC Quadcopter ( including DSM Receiver ), 1 x Battery, 4 x Spare Propeller, 1 x English Manual, 1 x USB Charging Cable
...Continue Reading
Posted by HezarfenF16 | Jun 27, 2017 @ 10:12 AM | 2,631 Views
Hello, this is my DIY FPV Mod for well known micro quad Floureon H101. Floureon H101 is a great quad with a low price. It was sold on gearbest for 9.99$ [I was shared here] and I catched the deal. It is out of stock now but I think many people have it already. So you can turn your old H101 into a micro FPV quad! Below you can see my review for LST S1 800TVL Mini AIO FPV Cam and Android OTG FPV Receiver module to turn your smartphone into a FPV Monitor of FPV Goggles with a cheap VR Goggles.


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

Turn your Smartphone into a FPV Monitor or FPV Goggles with Android OTG FPV Receiver Module:

BUY HERE for $18.79 with Coupon: rc18off

You can get one cheap VR goggles HERE to put your phone in and Turn it into a DIY FPV Goggles with a good Monitor:

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

MINI All in One FPV CAM for DIY: LST S1 800TVL with whip antenna:

BUY HERE for $13.96 with Coupon: rc18off

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

If you want clover leaf antenna, this is ANOTHER BRAND 800TVL camera with clover leaf antenna: $13.70

BUY HERE

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

If you don't have a H101 it is out of stock now, sorry. But you can get a FuriBee F36 to make a Tiny Whoop FPV quad using the LST S1 and OTG FPV Receiver.
It is for 12.99$ Now HERE



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

TEST VIDEO:
[DIY] Floureon H101 [FPV MOD] with LST S1 800TVL AIO FPV Cam and
...Continue Reading
Posted by HezarfenF16 | Jul 10, 2016 @ 10:27 PM | 4,597 Views

Hello, I was not interested in rc cars before, my main interest is multicopters. I wanted to start this hobby with a budget car, I researched and readed some reviews and then I selected this one and wanted to try it because it has good specs for a good price as I researched. Before this one Feiyue FY03 was the best decision it has similar look but different specs, I mentioned why I selected 12428 below. Now start with specs of WLtoys 12428:

Specs from Product pages:
Drive Type: 4 WD
Proportion: 1:12
Control Distance: Over 100m
Detailed Control Distance: 100-150m
Transmitter Power: 3 x 1.5V AA battery (not included)
Car Power: Built-in 7.4V 1500 mah rechargeable battery
Charging time : 3 hours
Racing Time: 10mins
Product weight: 1.490 kg
Product size (L x W x H): 18.00 x 24.50 x 42.00 cm / 7.09 x 9.65 x 16.54 inches
Servo : 25g servo
Motor : 540 brushed
Car shell : antiknock PVC printing car sheel,
Ground clearance : 40mm
Max to 50km/h high speed theoretically
Simulate its structure and control from real.
Waterproof
LED Lights

My Thoughts:
This is my first 4WD car and I donít have any experience in rc cars before. My purpose in this review is to show a good product to who want to start this hobby. I have asked some experienced people which one should I get to start and I selected this one at the end. Hope this review helps you.

Best specs I considered when selecting this instead Feiyue FY03:
Cheaper price: WLtoys 12428 50.85$ now on...Continue Reading
Posted by HezarfenF16 | Jun 14, 2016 @ 04:42 AM | 4,500 Views
Hello, I want to share my old review that I have written on my blog here: RCDroneGeek.blogspot.com
Here you can read my review for popular budget performance quadcopter Tarantula X6 /JJRC H16. This quadcopter is very popular because of it has very good power with a low price. First lets look at its specifictions:

Hyper IOC function: Outstanding orientation mode can start and fly any orientation, thus no need to worry about losing in the orientation when it flies far away.
Strong and unique design proving stability and durability.
Professional propeller with EVA shock mounts.
Great steady performance and strong power allows the copter to finish the flip fly within 1 meter high from the ground.
7.4V 1200mAh huge capacity battery for long lasting fly.
With protective board of over – power and low-power.
With trim adjustment, better for tuning the flight.

Brand: YIZHAN
Battery: 7.4V 1200mAh li – po
Remote distance: Approx. 300m
Flying time: About 7mins
Charging time: About 150mins
Channel:
4-Channels
Mode: Mode 2 (Left Hand Throttle)
Transmitter Power: 6 x 1.5V AA battery(not included)
Package Weight : 1.2 kg
Package Contents Package Contents: 1 x Tarantula X6 Quadcopter, 1 x LCD Transmitter, 1 x English Manual, 1 x Charger, 4 x Propeller, 1 x Scewdriver, 1 x 7.4V 1200mAh Li - Po Battery

---------------------------------------------------------------------------------------------------------------

PRODUCT LINKS TO BUY: (Gearbest.com)
Yizhan Tarantula X6 New...Continue Reading