rcflo's blog View Details
Posted by rcflo | Mar 06, 2016 @ 10:09 PM | 3,074 Views
The Safety Third Racing and FPVAddiction teams got together today and raced at the Liberty Science Center for the NYC Drone Film Festival. We had an unbelievable turnout, and people of all ages tuned in a watched on the big screens and the 50 pairs of fatshark goggles the liberty science center bought for this event. some of the biggest names in racing, showing down whose boss for a DJI phantom pro, and for the kids and spectators all over.

NYC Drone Film Festival FPV Racing - Safety Third - FPVAddiction (2 min 12 sec)

Posted by rcflo | Mar 01, 2016 @ 02:43 PM | 3,165 Views
Well the time has finally come, www.FloRotoRs.com launched last night, and is already doing great. Take a look for US stock of high performance, carbon fiber FPV frames. Thanks for everyone's support that has gotten me here, it's only the beginning! Cant wait to continue to expand products and not only provide everyone with frames, but also components.

Stay tuned for more! and check out FloRotoRs Instagram as well: https://www.instagram.com/florotors/

Cheers!
Posted by rcflo | Jan 27, 2016 @ 10:00 PM | 3,531 Views
Just finished up one of three new logos!

this one will be used for an animated video banner intro, and for stickers.

What do you think?
Posted by rcflo | Dec 17, 2015 @ 09:11 PM | 5,977 Views
Some more build pics of the Hive 150 for you guys. Starting to become my favorite quad to fly...

FloRotors Hive 150 frame
http://armattanproductions.com/pages/kit_detail/49
1306 3200kv motors spinning 3in props
little bees 20a esc's
naze mini rev3 / d4r-ii sandwich (will also fit full size 30.5mm mounting flight controller) just trying this one out.
lumenier vTx w/ VAS antenna
HS1177 FPV Camera

A couple pics taken with the Hive 250 as well
http://armattanproductions.com/pages/kit_detail/23...Continue Reading
Posted by rcflo | Dec 15, 2015 @ 11:14 PM | 3,989 Views
Well, my Pods and ~10 other Safety Third Racing team members Pods are still in customs, so i will share chrosa's recent frame pics. Turn any multirotor frame into a crash proof FPV racer or wanderer.
utilizes the 30.5mm x 30.5mm square m3 mounting, (found on most if not all flight controllers and PDBs these days). Integrate this into your stack, and put the goggles on!

Ill be sure to post many more as they start coming in.

looking great chrosa
http://armattanproductions.com/pages/kit_detail/69

http://armattanproductions.com/pages/kit_detail/63

Non countersunk 4mm and 5mm available too
http://armattanproductions.com/pages/kit_detail/71
Posted by rcflo | Dec 14, 2015 @ 05:58 PM | 3,953 Views
With the recent federal law coming down on registration of "drones", I figured this would be a great time to launch this project I have been thinking of for a few months.

In the next few days, I will add custom cutout carbon fiber number and name tags to my webstore on Armattan Productions. Throw your AMA # / registration # / name / phone # on the tag and show up at the field worry free. Tags will range from ~ 1"x1/2" to ? depending on how much you want on there.

The tags will have slots on both ends to fit most if not all multirotors arms and frames as well as any other aircraft between two m3 screws you may already have (think quadcopter arm, or top plate, or bottom of frame, or fuselage, or heli frame, lots of options for mounting).

In most cases; design, upload, quote, CNC, package, ship, delivery takes about 3 weeks depending on CNC queue.

3d renderings to come, stay tuned!

Flo
Posted by rcflo | Dec 02, 2015 @ 09:28 PM | 4,580 Views
Had a bunch of these little cells laying around, decided to actually do something with them. perfect for race day with the micros.

1s Nano-tech 65C/130C 350mah turned to 4s
Posted by rcflo | Nov 24, 2015 @ 03:42 PM | 4,319 Views
Now up on the website: the entire micro FPV lineup. Get yours today for the upcoming indoor racing season!

Percs:
-1104 and 1306 motor mounting for 3in props
-HS1177 type camera caged in and tilted up to 50 degrees in all frames
-Full size flight controller (30.5mm mounting)
-Buzz130 and Hex155 are pure X and pure Hex layouts
-Buzz130 and Hex155 have 3 options for vTx mounting, Hive 150, 2 options
-Armattan 3K Carbon Fiber (3mm frames, 2mm plates)
-recommended 1306 3200kv or 3350kv motors with rotorx 3in tri props and 4s battery - makes these things keep up with the big boys outside

Hive 150 FPV Quad Kit
http://armattanproductions.com/pages/kit_detail/49

Hornet 155 FPV Hex Kit
http://armattanproductions.com/pages/kit_detail/61

Buzz 130 FPV Quad Kit
http://armattanproductions.com/pages/kit_detail/63...Continue Reading
Posted by rcflo | Nov 22, 2015 @ 01:32 AM | 4,598 Views
Had a great day with the S3 Racing team today in Pipersville PA. Shout out to SkyPirates RC club for letting us set up a track on their field, top notch group of guys.

Heres some post race fun with streamers

Post race shenanigans with friends - S3 Racing - track layout & streamer chase (3 min 7 sec)

Posted by rcflo | Nov 16, 2015 @ 03:20 PM | 10,461 Views
Hey everyone,

Just updating all of you what ive been working on lately.

Expanding my lineup to:

- Hive 150 micro FPV Quad - 3in props, 1306 & 1105 motors

- Hornet 155 micro FPV Hex - 3in props, 1306 & 1105 motors

- Buzz 130 pure-x micro FPV quad - 3in props, 1306 & 1105 motors

- Buzz 230 pure-x FPV quad - 6in props, 22xx motors - (countersunk and non countersunk versions available) This will become my 6in 6s build!!! 5mm thick carbon fiber frame! Countersunk version allows flush mounting of FC and PDB onto frame via 3d cutting into CF

- Hive 250 FPV Quad - 6in props, 22xx motors

- Hornet 230 FPV Hex - 4in props, 1306 & 1806 sized motors, & 22xx soon!

__________________________________________________ _______________________

Hive 150 Prototypes are cut and built and already racing around. More en route to the US, if anyone is interested in fast shipping. - 48g frame weight minus hardware

Hornet 155 hex being quoted now - 54g frame weight minus hardware

Buzz 130 pure-x quad being quoted now - 34.5g frame weight minus hardware

Buzz 230 pure-x quad production frame en route to US now. - 103.7g Countersunk version , 104.5g non countersunk version


So whats new...
The Hornet 155 hex and the buzz 130 and 230 pure x quads are all top mounted FPV camera frames. Each sport a fully protected FPV camera cage, that tilts an HS1177 type FPV camera (Sony Mini SUper Had-ii CCD) up to 50 degrees.
They all utilize the same FPV Pod that mounts, tilts, and...Continue Reading
Posted by rcflo | Nov 09, 2015 @ 12:50 PM | 5,040 Views
The rev2 plates came in, really loving the slight changes from the prototype frame. Now sits narrower, allows 6in props. Dedicated battery loading tray that double as a top plate if no battery cage is preferred, the clean (bobbined) camera section is not shorter as well and has a more beefy top clean plate. All of the electronics are stacked inside the electronics compartment and co.pletely out of harms way in this build, really liking how protected everything is.

This frame is available through Armattan Productions here:
http://armattanproductions.com/pages/kit_detail/23

Added video!
Early morning ripping around - FloRotors Hive250 (2 min 2 sec)
...Continue Reading
Posted by rcflo | Nov 05, 2015 @ 10:18 AM | 4,437 Views
I first designed this frame for a friend, known as thermo, and have made a few revisions to it based on hours of flight testing.

Heres a slight design change over the original, now a top mounted fpv camera.

the FPV pod mechanism came out very nice and works perfectly....Continue Reading
Posted by rcflo | Nov 05, 2015 @ 09:41 AM | 4,555 Views
Hey guys,

Hot off the CNC this morning, two prototype Hive 150mm FPV frames. (Polycarbonate prototypes)

Very excited with these, they came out perfect. I can't wait for the carbon fiber parts to show up.

1306 and 1104 motor mounting slots for insane power setups on 3s and 4s. 3in props, (cant wait to try out the rotorx tri's). Tilted hs1177 CCD camera, completely caged in.

This is going to make warehouse racing this winter a lot of fun. and not too expensive!...Continue Reading
Posted by rcflo | Nov 04, 2015 @ 10:50 AM | 4,804 Views
Hey guys,

I recently made a hand cut plate for the top of my 155mm fpv hex (I wanted to reposition the fpv camera from the front to the top for better weight balance on such a tiny build). the results are awesome, and the Armattan rubber tilt clamps have held up tremendously (multiple horrible crashes with this tiny guy, indoor and outdoor, and probably hundreds of cart wheels, its faster than you think!)
It worked so well, that i modelled the optimized parts and will upload them to my Armattan Productions store (FloRotors)
http://armattanproductions.com/pages...roduct_grid/13


The camera plate that gets attached can be modified to fit any number of cameras out there on the market, this particular one is for the ~$8-9 banggood micro camera
http://www.banggood.com/600TVL-8_0MP...-p-984345.html
which is surprisingly quite good in both color and refresh rate. i just wish it didnt have such a wide angle lens. anyone know where to get this tiny ~8mm threaded lens in standard view? maybe the 808 #16 lenses?

anyways, here are the pictures. this can be applied to any 30.5mm square layout mounting holes (Flight controller mounting dimensions) so it can be used as a top plate for your FC and FPV unit.

There is a hole for your vtx antenna output / SMA pigtail to run to and attach your antenna securely, and small holes for a ziptie to come and attach your vtx to the bottom of the plate as well if preferred. all in all, the vtx, camera, and antenna can be mounted on...Continue Reading
Posted by rcflo | Oct 28, 2015 @ 01:44 PM | 4,490 Views
Coming soon to the FloRotors lineup:

-155mm fpv hex for 1306 and 1104 sized motors and 3in props. (Prototype shown below) - PURE HEX CONFIGURATION)

-150mm fpv quad for 1306 and 1104 sized motors and 3in props and fully cased hs1177 type fpv cameras (600tvl and 700tvl ccd super had ii) allowing tilt up to 50 degrees without any fov obstruction. (Model shown below, proto being cut) - 43 degree arms H configuration, just off of pure X to fit the full scale fpv camera)

150mm fpv quad for 1306 and 1104 sized motors and 3in, 3.5in, and 4in props. -PURE X CONFIGURATION

All sport 30.5mm mounted flight controllers like the Naze and dodo, etc, on the latest cleanflight or betaflight

Stay tuned!

...Continue Reading
Posted by rcflo | Oct 27, 2015 @ 10:33 AM | 4,399 Views
Available on the FloRotors Armattan Productions website:
https://armattanproductions.com/pages/kit_detail/18

The Hornet FPV Hexacopter is a 230mm size racing hex frame designed for full fpv gear and flight cam. This lightweight yet incredibly durable frame is designed for 18xx motors and 13xx motors spinning 4 inch props.

The FPV camera is completely enclosed for protection and a secure mount, and allows for three different mount angles, 0, 20, 35 degrees.

All the sensitive electronics are mounted to a "clean" section on the frame, riding on 6 bobbins for vibration isolation. This includes the Flight Controller, the FPV cam, the flight cam, the receiver, and vtx. the esc's are mounted to the "dirty" section on the arms. No jello in the video, and vibration free flight controller performance

The frame fits a Mobius action cam on its top clean plate, a GoPro can also be strapped down on this plate. Tilt blocks for action cams to come.

The motor layout is spider-like, allowing incredible speeds flying forward, yet hovers on a dime with the help of a provided custom mix. This also allows for full 120 degree FOV from the FPV and flight cameras, without prop interference.

The frame is held together using aluminum hardware, M3 all around, Motor mounts are M2 for those motor sizes.

Custom Mini Hexacopter 226mm - 3100kv 1306 on 3s - Armattan (1 min 45 sec)


Custom Mini FPV Hexacopter 226mm Freestyle - Armattan (2 min 33 sec)
...Continue Reading
Posted by rcflo | Oct 07, 2015 @ 09:36 PM | 5,176 Views
The big launch has finally arrived. Head over to the new Armattan Productions website and check out all the new awesome designs.

Here's a link to my frames and accessories:
https://armattanproductions.com/page...roduct_grid/13

New Hive 250 available, now able to sport 6in props.
Calm before the storm - FloRotors Hive 250 FPV Racer (5 min 41 sec)

Fast laps around the baseball fields - FloRotors Hive 250 FPV (4 min 54 sec)
...Continue Reading