J0972's blog View Details
Posted by J0972 | Mar 22, 2019 @ 11:39 PM | 562 Views
1/24 Scale ECX Barrage Belt Drive Mod (2 min 40 sec)


Please Like and Subscribe!

This is a belt drive mod for the 1/24 scale ECX barrage. The stock truck lacks the torque and low speed control to crawl. The stock gear ratio is 5:1, this mod will make it 10:1. Besides the 3D printed parts you will need a few #12 rubber bands and two bearings that have an OD of 8mm an ID of 3mm and a thickness of 4mm. This does not require any permanent mods to the truck.
Posted by J0972 | Dec 15, 2018 @ 10:30 PM | 1,459 Views
1/24 Scale ECX Barrage Review (6 min 26 sec)


Please like and subscribe if you enjoyed this video!
Posted by J0972 | May 26, 2017 @ 03:10 PM | 3,477 Views
Hello everyone, I recently started a small side business cutting and printing vinyl graphics . I can do window graphics, signs, banners and AMA numbers. In addition I can do wraps and decals for bodies, transmitters and cases.

Attached are a couple pictures of decals I recently finished.

I can be found @PerformanceVinyl on Facebook or you can click the following link to go directly to my page https://www.facebook.com/PerformanceVinyl/.

Don't forget to hit the "Like" button!

I will be updating it regularly with completed work.
Posted by J0972 | Apr 02, 2015 @ 08:49 PM | 4,296 Views
I have been an RC nut for as long as I can remember. Some of my first RC memories are of my dad flying planes with friends and me smashing old toy RC cars with a hammer and attempting to glue them back together. I have since graduated from deconstructing my models with a hammer to allowing operator error and gravity do the dirty work. I hope to use this blog to share some tips and tricks I have found along the way and to keep myself motivated to complete my many RC projects.


My first hobby grade RC vehicle was a Traxxas Stampede. In my opinion it is one of the best all around vehicles for having fun bashing around the yard. Shortly after the Stampede I began to take interest in local full scale dirt oval racing. At the time I was not old enough to race so the next best thing I could do was race RC dirt oval. I mowed many lawns in order to get my first competition level car. After a few years of racing RC dirt oval cars I was finally old enough to build a full scale racecar and my RC interests took to the sky.


My first plane was an Ultra Stick 40. I still have it and it is next on my list of projects. It is long over due for a makeover. It has endured countless amateur mistakes. Although the Ultra Stick was my first plane; my first solo flight came on my friends easy sport 40. This is one of my favorite RC stories. We progressed from standing side by side while I was flying to my friend just being in the area in case something were to go wrong. Well one day it...Continue Reading