microairman1's blog - RC Groups
Shop our Airplanes Products Drone Products Sales
microairman1's blog View Details
Posted by microairman1 | Jul 03, 2015 @ 12:12 AM | 3,429 Views
here are some pics from the maiden flight! it went really great, plane flies awesome. need to look at bigger motors as the 1.60 brushless motor isn't doing so great in it. but other then that I am very happy with it! its a lot of fun!...Continue Reading
Posted by microairman1 | Apr 23, 2015 @ 12:08 PM | 4,043 Views
Here is my current project. It is gonna be a 110" wingspan and is 95" long.

Gonna be 5ch ( rudder,elevator, ailerons, throttle, flaps,).

Not sure what the auw weight will be yet, but it is very light so far.
Also working on some huge tires for it( pic below) but not sure I will use them yet.

Will update as project Continues
Posted by microairman1 | Apr 06, 2015 @ 02:20 PM | 3,607 Views
Here is my new project!

Made of dtf and hot glue. Designed myself and built myself.

Has a 70" WS with a 19" chord. Weighs about 9pounds and is running an emax 1.10 325kv motor on 6s 10,000mah (twin 6s 5000s) with a 20x10apc prop.

Did a test hop and it can carry about 1800grams of payload. Planning for fpv when I can afford all the stuff. Can't wait for a true maiden!!
Posted by microairman1 | Dec 25, 2013 @ 04:04 PM | 4,398 Views
so, I don't do blogs much, mostly just to keep things in one area so I don't lose them. but I guess have a little to say about everyone on here.

this year has been a kinda tough year between a broken hand, a small flood, my grandpa fell on the ice and got pretty beat up, my cousin has a bone infection,and my mom lost her job, it has been kinda tough with all that and some more that I cant say, but about 2 months ago we had a big house fire, and I lost everything(clothes,rc planes, rc cars, rc helis) although no one was hurt which I am very thankful for, it is hard being in a hotel with nothing for awhile.

but everyone of my friends from rcg and the club are absolutely awesome.

I went from a pretty large fleet of planes and such to nothing, and now just about 2months later at the end of the year I have:

helimax 1sq
hubsan micro h107d
mini vapor
a dx6i(borrowing)
flyzone mini switch
electrifly pluma foamy kit with all electronics
eflite byp yak kit
a scratch built slowflyer from a club member
and $200 worth of parts and tools

including all new clothes from a member In our church.
it is pretty amazing to know that when, something happens, there are still people out there willing to help out and give without asking in return.

I just want to say thank you to anyone that helped out, because I really thank you. we will still be in a hotel for about 3 more months while our house is rebuilt. but at least I have some stuff to pass the time.

Posted by microairman1 | Aug 22, 2013 @ 11:38 PM | 4,411 Views
here are a few planes that i like the looks and design of for FPV/camera/payload planes. i am liking the twin boom pusher planes.
Posted by microairman1 | Aug 20, 2013 @ 06:33 PM | 5,235 Views
Dtf 3d foamy i made before i even knew how to fly
it was setup using a brushed 370 gearbox with a 900mah 6cell nicd! that thing was heavy!!!

p.s sorry, my room was super dirty back then
Posted by microairman1 | May 10, 2013 @ 06:39 PM | 5,040 Views
well I got this plane for Christmas and have finally got it almost ready for a maiden so I went outside to do a few tests with my motor and ESC(like check for heat) well I taxied all over my driveway just fine so I brought it over and stood in front of the tail so I can put the motor to full power.i slowly started advancing the throttle until I was at about half and all the sudden my prop flew off the firewall half came off and the fiberglass cowl is all messed up.(the pics are kinda blury) I emailed GP so we will see what happens but it is pretty sad that this would happen,luckly It happened on the ground tho and not in the air.i am getting tired of ARFs tho with all the problems I have had with them.
Posted by microairman1 | Apr 29, 2013 @ 09:42 PM | 5,002 Views
well i was at the park and broke my hand today.i have a temporary cast on right now but i might have to get a real one this week.i am really mad cause i might not be able to fly for awhile.also upset cause with only one hand i cant really build . I am in quite a bit of pain but i will survive Haha.
Posted by microairman1 | Apr 27, 2013 @ 06:30 PM | 4,584 Views
well everything went fine till I lost control of it and it went full throttle into the ground.i just got this for my birthday so it is super disappointing.the motor cut the and stripped,i did say stripped the wire on my esc and I am still missing a few chunks of foam.i think it was my esc cause it smelled kinda funny.
Posted by microairman1 | Nov 15, 2012 @ 11:01 PM | 5,316 Views
so i maidened the glider today and it flys amazing. cant wait to go to a nice slope and test it out.hopefully i will get some video when i go to the hill.
Posted by microairman1 | Oct 22, 2012 @ 10:58 PM | 5,729 Views
My new Cox Thermal Hawk glider. its a 60in wingspan cox glider.paid $20 for it.