This is how i quickly bind the spektrum serial receiver with diversity
to my DX8 transmitter. The serial RX is connected on the dsm port
on the Omnibus f3 AIO FC and powers the serial RX.
Also show how to initially setup your receiver in betaflight to make
the input correspond correct with the FC.

Spektrum Serial RX Initial Setup SPM4648 | Betaflight | DIY (2 min 27 sec)

Got It Done | LT-210 FPV Racing Drone | DIY Build 3 (3 min 53 sec)

A while back I made version 2 of the fatshark 18650 li-ion case, but apparently i didn't share it here yet.
Made this video on how to connect everything so you can use this for your fatshark goggles.

If you have a 3D printer and want to make one then you can find the stl file here at my thingiverse
http://www.thingiverse.com/thing:2038043

Fatshark 18650 FPV battery Case with LED (14 min 18 sec)

Enjoy

1hour video of how to model a basic drone frame in creo parametric.
So you can use that afterwards to mill CF frames or design other parts
for 3D printing, and make what you want but let start with the frame.
Enjoy

Design a Basic Drone Racing Frame | Creo 3 (1 hr 27 min 56 sec)

It snowed a bit here in belgium, so took out the desert fox out for a spin
and having some fun slipping and sliding on the slushy ice road.
A really great buggy to have some fun with for the price

Desert Fox On Slushy Ice Road (5 min 8 sec)

Here is part 2 of the build and the FLIP32 Omnibus is alive and not smoking.
Have to figure out how to mount the vtx and spektrum sat receiver al the rest
motors, esc, cam, pdb is connected.

Dont forget to check the blog of this build !HERE!

LT-210 FPV Mini Quad Build FLIP 32 AIO Alive #2 (6 min 59 sec)

Details:
LT-210 frame
Flip32 Omnibus AIO FC
Littlebee 30A ESC
Matek PDB
Emax RS2205 2300kv motors
Fatshark 600mw VTX
Sony HS1177 + 2.5mm Gopro hero lens
HQ 5*4*3" Props


I had this frame for a while but didn't had the time,now that I have 3 weeks of holiday its time to build this frame up and get it up and flying.
Got motors mounted and soldered the esc to motors and PDB,already check motor spinning direction so I don't have to reverse them in blheli.

Also check the build Video here !PART 1!

Started a new build. had this frame and parts in a box but now I
have some spare time to build this 210 mini quad.
So check it and stayed tuned!

Dont forget to check the blog of this build !HERE!

LT-210 Mini Quad Build Soldering ESC to PDB #1 (3 min 21 sec)

It has been a while, Time to have some FPV fun with my mini quad
and see if I still can control it..... after playing Steep with a Xbox controler
on a PC, so this will be interesting. Enjoy

A Nice Day to Crash a Mini Quad FPV Style (4 min 17 sec)

Hey guys,

My old batt. from my fatshark attitude are draining to fast.
So i got some old laptop packs from IT and got some 18650 cell out.
Model this simple case and top for holding the cell, for now without the checker,
I will redesign it ones i have the led checker and see how to include a pololu step
up to use the full potential from the batt.

But you can find the model here on thingiverse





...Continue Reading

Hey happy flyers, so i got my old tbs disco out after changing motors
and propeller and i got 30 min out of it with a 4s10A batt.

TBS Discovery 30 Min Flight Time without extended arms! (32 min 22 sec)

Hey guy,

Here is a video on how I connect and flash/program my BLHeli esc
using a CC3D flight controller with betaflight firmware as passthrough.
This works great for wen all your wire are soldered.

How To Flash/Program BLHeli ESC with Betaflight Passthrough (3 min 22 sec)

Hey guys,

So it has been a wile but i am rebuilding my zmr 250 and replaced the
esc with some DYS SN16A esc, so made this video on how i flashed them with the latest BLHeli firmware using a Arduino Mega.

How to flash DYS SN16a ESC with BLheli Firmware/Arduino Mega (10 min 3 sec)

Circling with Buzzard (3 min 7 sec)

Hey guys,

So i finally made some time to practice flying my little zmr
racer with mr steels technique controlling the quad.
Seem to work, but the pid are not fine tuned yet so the feeling
is not complete there yet. but what you expect for the first runs.

Zmr 250 First Practice with Crashes!! (3 min 19 sec)

So this time not a drone but a electric buggy from hobbyking.
Sinds it was not that expensive i gave it a go.
First thing that went wrong was the grub screw was not secured
the right way so it was soon from 4WD to RWD.

First sort run with the fox on woods!

Hobbyking Desert Fox racer throwing up wood! E1 (1 min 47 sec)

Through & Above The Morning Clouds Raw Footage (10 min 34 sec)

I wanted to take out my tbs disco and go fly around a bit,
before I did that connected it to the pc and recalibrated the FC.
One of the ESC was all acting weird till something got to hot and
the heat shrink went up in smoke.
Have to replace it but before I can do that need to flash it with simonk firmware, so made this short video on how I flash them.

How To Flash HK 20A Speedcontroller ESC (4 min 27 sec)

Made a short video of my friend breathing fire while I was droning
around him and trying to make some shot! Enjoy

Fire Breathing J-Man (1 min 47 sec)

Was able to fly at this local nice and fun festival making some aerial video shot!

Release Festival 2015 Filmed From above (3 min 22 sec)

This was a little first raw edit.

Feniks Taiko Drumming @ Release Festival 2015 (2 min 15 sec)

...Continue Reading